Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 2,879
Default FYI

The cargo cover for our vehicle is removable, as an assembly.
Often, NOT having it in the car is preferable as it alters the
complexion of the cargo area amking some things easier to haul
in its absence.

I had purchased some J hooks that I planned on mounting on a wall
to support the two ends of the cargo cover (which looks like a
rolled-up window shade in its natural configuration).

As I'd like NOT to mar the finish from repeatedly storing and
retrieving it, I opted to cover the painted, tubular steel
hooks with something for a softer finish less prone to
"transfering *color*" (scuffing) to the cover.

A length of heater hose is a logical choice -- but, black rubber
might want to scuff, over time. So, I opted for clear vinyl
tubing.

Of course, it's ID is sized perfectly to coincide with the OD of
the J hook! And, as the J hook immediately wants to *bend*
(which happens to alter its cross-sectional profile from that of
a perfect circle to some distorted version thereof!), getting
the tubing to easily slip onto the J hook's body is just not
gonna happen!

Didn't want to use any sort of lubrication that would persist
trapped in that space as it might eventually leak onto the cover
(or my wall!). Also, wanted to exploit the transparent nature
of the tubing (don't want to see some gunk inside it!)

First attempt was suggested by the whistling tea kettle. Poured
the oiling water through the length of tubing, collecting it in a
large, plastic bowl. Sat the tubing *in* that bowl so the exterior
was heated as well.

Yikes! The tubing obviously doesn't expect to be used *hot*!
The semi-rigid ~3/4" dia tubing became very flacid and pliable.
Slide it onto the J hook with ease -- even around that bend!

But, act quickly as it cools quickly when in intimate contact
with the room-temperature steel tubing body of the J hook!

Tomorrow, I'll buy some caps to go over the open, tubular ends
(as that's where the cargo cover will inevitably BANG against
the hooks as it is raised into place on the hooks).

Some problems have delightfully easy solutions! :
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 04:42 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"