DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Math profs driver's-side mirror: no blind spot (https://www.diybanter.com/home-repair/342111-math-profs-drivers-side-mirror-no-blind-spot.html)

HeyBub[_3_] June 8th 12 02:43 PM

Math profs driver's-side mirror: no blind spot
 
"A side-by-side comparison of a standard flat driver's side mirror with the
mirror designed by Dr. R. Andrew Hicks, mathematics professor at Drexel
University. With minimal distortion, Hicks's mirror shows a much wider field
of view. Hicks's mirror has a field of view of about 45 degrees, compared to
15 to 17 degrees of view in a flat mirror."

Math: Is there anything it can't do?

http://phys.org/news/2012-06-math-pr...or-patent.html

Of course it is illegal for the mirror to be installed by a car
manufacturer.

I blame the mirror lobby.



dpb June 8th 12 03:15 PM

Math profs driver's-side mirror: no blind spot
 
On 6/8/2012 8:43 AM, HeyBub wrote:
....

Of course it is illegal for the mirror to be installed by a car
manufacturer.

I blame the mirror lobby.


Nonsense...it's in the NHTSA (National Highway Traffic Safety Admin)
regulations owing to the classic distortion problem--at one time the
wide-angle mirrors that are now permissible/used on the right-hand side
of passenger vehicles (w/ the mandatory annotation as noted in the
article) were allowed but it was discovered that the depth compression
they caused was causing many to underestimate the distance to a
car/object and so they were limited to the non-driver's side and the
warning required. I don't recall just when and didn't look it up but it
would likely have been in the 60s or so if my memory is roughly
chronologically correct--it seems to me it was the '58 Chevy 1/2T I
remember that had the wide-angle mirror on both sides.

At some point, NHTSA will evaluate the new technology and likely approve
a set of standards for apparent distortion and update the requirements
if it seems to really be workable solution.

--

Harry K June 8th 12 03:43 PM

Math profs driver's-side mirror: no blind spot
 
On Jun 8, 6:43*am, "HeyBub" wrote:
"A side-by-side comparison of a standard flat driver's side mirror with the
mirror designed by Dr. R. Andrew Hicks, mathematics professor at Drexel
University. With minimal distortion, Hicks's mirror shows a much wider field
of view. Hicks's mirror has a field of view of about 45 degrees, compared to
15 to 17 degrees of view in a flat mirror."

Math: Is there anything it can't do?

http://phys.org/news/2012-06-math-pr...or-patent.html

Of course it is illegal for the mirror to be installed by a car
manufacturer.

I blame the mirror lobby.


I blame some numb nuts for getting that same system standard on the
right side mirror. One CANNOT judge how far back a vehicle is in
those abortions of mirrors. The Europeans have had a far better
system for years. Standard flat mirror with a "wide view" portion on
the outer third.

When I look in a mirror I want to know WHERE a vehicle is, not that
one is there somewhere.

Harry K

Han June 8th 12 06:13 PM

Math profs driver's-side mirror: no blind spot
 
Harry K wrote in
:

On Jun 8, 6:43*am, "HeyBub" wrote:
"A side-by-side comparison of a standard flat driver's side mirror
with t

he
mirror designed by Dr. R. Andrew Hicks, mathematics professor at
Drexel University. With minimal distortion, Hicks's mirror shows a
much wider fi

eld
of view. Hicks's mirror has a field of view of about 45 degrees,
compared

to
15 to 17 degrees of view in a flat mirror."

Math: Is there anything it can't do?

http://phys.org/news/2012-06-math-pr...or-patent.html

Of course it is illegal for the mirror to be installed by a car
manufacturer.

I blame the mirror lobby.


I blame some numb nuts for getting that same system standard on the
right side mirror. One CANNOT judge how far back a vehicle is in
those abortions of mirrors. The Europeans have had a far better
system for years. Standard flat mirror with a "wide view" portion on
the outer third.

When I look in a mirror I want to know WHERE a vehicle is, not that
one is there somewhere.

Harry K


Have to second the compliments of the European mirrors. The outer third
of the driver's side mirror is a wide angle mirror, so you have the best
of both worlds. Takes minutes to get used to, if you're a slow learner.

--
Best regards
Han
email address is invalid

DerbyDad03 June 8th 12 06:21 PM

Math profs driver's-side mirror: no blind spot
 
On Jun 8, 1:13*pm, Han wrote:
Harry K wrote :





On Jun 8, 6:43 am, "HeyBub" wrote:
"A side-by-side comparison of a standard flat driver's side mirror
with t

he
mirror designed by Dr. R. Andrew Hicks, mathematics professor at
Drexel University. With minimal distortion, Hicks's mirror shows a
much wider fi

eld
of view. Hicks's mirror has a field of view of about 45 degrees,
compared

*to
15 to 17 degrees of view in a flat mirror."


Math: Is there anything it can't do?


http://phys.org/news/2012-06-math-pr...or-patent.html


Of course it is illegal for the mirror to be installed by a car
manufacturer.


I blame the mirror lobby.


I blame some numb nuts for getting that same system standard on the
right side mirror. *One CANNOT judge how far back a vehicle is in
those abortions of mirrors. *The Europeans have had a far better
system for years. *Standard flat mirror with a "wide view" portion on
the outer third.


When I look in a mirror I want to know WHERE a vehicle is, not that
one is there somewhere.


Harry K


Have to second the compliments of the European mirrors. *The outer third
of the driver's side mirror is a wide angle mirror, so you have the best
of both worlds. *Takes minutes to get used to, if you're a slow learner..

--
Best regards
Han
email address is invalid- Hide quoted text -

- Show quoted text -


Slap one of these on your US based car and you'll feel like you're in
Europe. Just stay on the right side of the street. ;-)

http://www.greatsku.com/wholesale/3r...mm-silver.html


All times are GMT +1. The time now is 10:05 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter