Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 31
Default Puck lighting

If you have them, do you like them? Do you have any recommendations, such
as LED, dimmer switch, brand?



Thanks





  #2   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 2,415
Default Puck lighting

"Gomba" wrote:
If you have them, do you like them? Do you have any recommendations, such
as LED, dimmer switch, brand?



Thanks


You might think about led strip lighting. I'm going to work on mine. Bought
long 30 foot strip, which can be devided in sets of 3 . Also got dimmer
control. More work putting it all together. They are bright and I got warm
white. Many LEDs have a sky or bluish tint, not mine.

Greg
  #3   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 18,538
Default Puck lighting

On Fri, 25 May 2012 18:46:48 +0000 (UTC), gregz
wrote:

"Gomba" wrote:
If you have them, do you like them? Do you have any recommendations, such
as LED, dimmer switch, brand?



Thanks


You might think about led strip lighting. I'm going to work on mine. Bought
long 30 foot strip, which can be devided in sets of 3 . Also got dimmer
control. More work putting it all together. They are bright and I got warm
white. Many LEDs have a sky or bluish tint, not mine.

Greg

DEFINITELY go with LED. The halogen or incandescent ones run very
hot, use a lot of power, and are expensive to replace (many of those
bulbs are over $8 each for Xenogen 5 watt bulbs) and do not last long.
Get "warm white" - dimmable are nice as you can adjust the light level
to what you want, instead of guessing how much light you might want
before purchace, and finding they are either too bright or too dim.
  #4   Report Post  
Posted to alt.home.repair
DA DA is offline
external usenet poster
 
Posts: 84
Default Puck lighting

responding to
http://www.homeownershub.com/mainten...ng-698763-.htm
DA wrote:
If you have them, do you like them? Do you have any recommendations,
such as LED, dimmer switch, brand?


When you say "puck", do you literally mean round flat light fixtures? This
particular type seems to be prone to overheating, at least those products
that are 120V powered and LED ones were especially bad in terms of
manufacturing quality. Horror stories about those puck LED lights abound (
http://elabz.com/repairing-lights-of...bn-led-lights/ is one
or search for "Lights Of America" for more ), at least a couple of years
ago.
Even their CFL counterparts seem to be having similar issues, most likely
due to overheating. I have both LED and CFL pucks and neither lasts as
long as their different design counterparts do. The shape must be messing
up with efficient heat dissipation or some other such inherent problem
with design.

Anyhow, I think if you really wanted to recess the lights or otherwise
hide them from view, use low voltage versions (12V, 24V) because the
position of the lights will make them simmer in the waste heat of the
voltage conversion from 120V and they won't last long. Low voltage ones
might still be warmer than necessary but at least there will be fewer
sources of that heat.

-------------------------------------
/_/
((@v@)) NIGHT
()::) OWL
VV-VV



  #5   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 18,538
Default Puck lighting

On Sat, 26 May 2012 16:58:51 +0000, DA
wrote:

responding to
http://www.homeownershub.com/mainten...ng-698763-.htm
DA wrote:
If you have them, do you like them? Do you have any recommendations,
such as LED, dimmer switch, brand?


When you say "puck", do you literally mean round flat light fixtures? This
particular type seems to be prone to overheating, at least those products
that are 120V powered and LED ones were especially bad in terms of
manufacturing quality. Horror stories about those puck LED lights abound (
http://elabz.com/repairing-lights-of...bn-led-lights/ is one
or search for "Lights Of America" for more ), at least a couple of years
ago.


ANY LOA product seams to have about the same reputation.
Even their CFL counterparts seem to be having similar issues, most likely
due to overheating. I have both LED and CFL pucks and neither lasts as
long as their different design counterparts do. The shape must be messing
up with efficient heat dissipation or some other such inherent problem
with design.

Anyhow, I think if you really wanted to recess the lights or otherwise
hide them from view, use low voltage versions (12V, 24V) because the
position of the lights will make them simmer in the waste heat of the
voltage conversion from 120V and they won't last long. Low voltage ones
might still be warmer than necessary but at least there will be fewer
sources of that heat.


Low voltage LED lights - of current technology, run cool and are
quite long-lived.

-------------------------------------
/_/
((@v@)) NIGHT
()::) OWL
VV-VV





  #6   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1
Default Puck lighting


PUCK YOU

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Graphics Tablet & Puck wanted Andrew Mawson[_2_] UK diy 3 January 9th 12 12:57 PM
Puck Board Jesse Home Repair 4 November 24th 09 06:32 PM
puck lights in kitchen Bert Christensen Home Ownership 1 September 27th 06 04:04 AM
Puck Light wiring Phil Cav Home Repair 7 August 11th 06 04:26 AM
xenon puck lights Tim Fischer Home Repair 0 September 22nd 05 03:30 AM


All times are GMT +1. The time now is 10:14 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"