|
shower head
Recently (maybe 6 months ago) I replaced my 14 year old moen shower
head with another moen shower head. When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. I live in a hard water area (Houston suburbs) so I expect this is the cause. I've seen in the past saw tv commercials to solve this like using CLR. I'm hesitant to believe the commercials so I ask here. One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). Suggestions?? Thank you. |
shower head
On Jan 23, 10:48*am, "Doug" wrote:
Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. * When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. *I live in a hard water area (Houston suburbs) so I expect this is the cause. *I've seen in the past saw tv commercials to solve this like using CLR. *I'm hesitant to believe the commercials so I ask here. *One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). *Suggestions?? * *Thank you. Ask Moen customer service for advice.They know the product, limitations, likely solutions, too. Joe |
shower head
On Mon, 23 Jan 2012 10:48:32 -0600, "Doug"
wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. I live in a hard water area (Houston suburbs) so I expect this is the cause. I've seen in the past saw tv commercials to solve this like using CLR. I'm hesitant to believe the commercials so I ask here. One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). Suggestions?? Thank you. White vinegar will dissolve the sediment in the shower head. Cost less than CLR. Soak the shower head in a bowl of vinegar. |
shower head
On Jan 23, 1:22*pm, Oren wrote:
On Mon, 23 Jan 2012 10:48:32 -0600, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. * When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. *I live in a hard water area (Houston suburbs) so I expect this is the cause. *I've seen in the past saw tv commercials to solve this like using CLR. *I'm hesitant to believe the commercials so I ask here. *One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). *Suggestions?? * *Thank you. White vinegar will dissolve the sediment in the shower head. *Cost less than CLR. Soak the shower head in a bowl of vinegar. I usually soak my shower heads in white vinegar after I've heated it on the stove for a few minutes. I don't know if it helps to heat the vinegar, but since warm water seems to clean better than cold water, I'm thinking it can't hurt. However, I've also seen suggestions where you put a plastic bag with vinegar around the shower head - without removeing it from the pipe - and letting it soak over night. Seems almost like more work than just taking the shower head off and sticking it in a pot. |
shower head
On Mon, 23 Jan 2012 10:22:46 -0800, Oren wrote:
On Mon, 23 Jan 2012 10:48:32 -0600, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. I live in a hard water area (Houston suburbs) so I expect this is the cause. I've seen in the past saw tv commercials to solve this like using CLR. I'm hesitant to believe the commercials so I ask here. One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). Suggestions?? Thank you. White vinegar will dissolve the sediment in the shower head. Cost less than CLR. Soak the shower head in a bowl of vinegar. Yes, that's what I decided to do for the time being. I'll see how it goes tomorrow after 24 hours soaking. My next approach will be to use a paper clip in holes if needed only. Thanks Oren... your help here and earlier posts are helpful ... thanks!! |
shower head
On Jan 23, 2:46*pm, "Doug" wrote:
On Mon, 23 Jan 2012 10:22:46 -0800, Oren wrote: On Mon, 23 Jan 2012 10:48:32 -0600, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. * When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. *I live in a hard water area (Houston suburbs) so I expect this is the cause. *I've seen in the past saw tv commercials to solve this like using CLR. *I'm hesitant to believe the commercials so I ask here. *One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). *Suggestions?? * *Thank you. White vinegar will dissolve the sediment in the shower head. *Cost less than CLR. Soak the shower head in a bowl of vinegar. Yes, that's what I decided to do for the time being. * I'll see how it goes tomorrow after 24 hours soaking. * My next approach will be to use a paper clip in holes if needed only. * Thanks Oren... *your help here and earlier posts are helpful ... thanks!!- Hide quoted text - - Show quoted text - Paper clip might be too big. I've used a sewing needle in the past. |
shower head
On Mon, 23 Jan 2012 11:59:16 -0800 (PST), DerbyDad03
wrote: On Jan 23, 2:46*pm, "Doug" wrote: On Mon, 23 Jan 2012 10:22:46 -0800, Oren wrote: On Mon, 23 Jan 2012 10:48:32 -0600, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. * When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. *I live in a hard water area (Houston suburbs) so I expect this is the cause. *I've seen in the past saw tv commercials to solve this like using CLR. *I'm hesitant to believe the commercials so I ask here. *One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). *Suggestions?? * *Thank you. White vinegar will dissolve the sediment in the shower head. *Cost less than CLR. Soak the shower head in a bowl of vinegar. Yes, that's what I decided to do for the time being. * I'll see how it goes tomorrow after 24 hours soaking. * My next approach will be to use a paper clip in holes if needed only. * Thanks Oren... *your help here and earlier posts are helpful ... thanks!!- Hide quoted text - - Show quoted text - Paper clip might be too big. I've used a sewing needle in the past. Maybe, don't know yet. Next option is a sewing needle. thanks. |
shower head
On Mon, 23 Jan 2012 09:44:50 -0800 (PST), Joe wrote:
On Jan 23, 10:48*am, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. * When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. *I live in a hard water area (Houston suburbs) so I expect this is the cause. *I've seen in the past saw tv commercials to solve this like using CLR. *I'm hesitant to believe the commercials so I ask here. *One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). *Suggestions?? * *Thank you. Ask Moen customer service for advice.They know the product, limitations, likely solutions, too. Joe Not a bad idea Joe :) |
shower head
On Jan 23, 3:21*pm, "Doug" wrote:
On Mon, 23 Jan 2012 09:44:50 -0800 (PST), Joe wrote: On Jan 23, 10:48 am, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. I live in a hard water area (Houston suburbs) so I expect this is the cause. I've seen in the past saw tv commercials to solve this like using CLR. I'm hesitant to believe the commercials so I ask here. One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). Suggestions?? Thank you. Ask Moen customer service for advice.They know the product, limitations, likely solutions, too. Joe Not a bad idea Joe :) Several years ago, late 70s, I picked up a set of little drill bits and a pin vise. They came like this sold as a tool for cleaning to acetylene torch tips. I have found a thousand uses for them. Being an electronics technician they received the most use cleaning solder out of printed circuit boards. Jimmie |
shower head
On Jan 23, 3:29*pm, JIMMIE wrote:
On Jan 23, 3:21*pm, "Doug" wrote: On Mon, 23 Jan 2012 09:44:50 -0800 (PST), Joe wrote: On Jan 23, 10:48 am, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. I live in a hard water area (Houston suburbs) so I expect this is the cause. I've seen in the past saw tv commercials to solve this like using CLR. I'm hesitant to believe the commercials so I ask here. One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). Suggestions?? Thank you. Ask Moen customer service for advice.They know the product, limitations, likely solutions, too. Joe Not a bad idea Joe :) Several years ago, late 70s, I picked up a set of little drill bits and a pin vise. They came like this sold as a tool for cleaning *to acetylene torch tips. I have found a thousand uses for them. Being an electronics technician they received the most use cleaning solder out of printed circuit boards. Jimmie- Hide quoted text - - Show quoted text - "I have found a thousand uses for them" Please list them. Thanks. |
shower head
"Oren" wrote in message ... On Mon, 23 Jan 2012 10:48:32 -0600, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. I live in a hard water area (Houston suburbs) so I expect this is the cause. I've seen in the past saw tv commercials to solve this like using CLR. I'm hesitant to believe the commercials so I ask here. One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). Suggestions?? Thank you. White vinegar will dissolve the sediment in the shower head. Cost less than CLR. Soak the shower head in a bowl of vinegar. That's the right answer. |
shower head
"Doug" wrote in message ... On Mon, 23 Jan 2012 11:59:16 -0800 (PST), DerbyDad03 wrote: On Jan 23, 2:46 pm, "Doug" wrote: On Mon, 23 Jan 2012 10:22:46 -0800, Oren wrote: On Mon, 23 Jan 2012 10:48:32 -0600, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. I live in a hard water area (Houston suburbs) so I expect this is the cause. I've seen in the past saw tv commercials to solve this like using CLR. I'm hesitant to believe the commercials so I ask here. One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). Suggestions?? Thank you. White vinegar will dissolve the sediment in the shower head. Cost less than CLR. Soak the shower head in a bowl of vinegar. Yes, that's what I decided to do for the time being. I'll see how it goes tomorrow after 24 hours soaking. My next approach will be to use a paper clip in holes if needed only. Thanks Oren... your help here and earlier posts are helpful ... thanks!!- Hide quoted text - - Show quoted text - Paper clip might be too big. I've used a sewing needle in the past. Maybe, don't know yet. Next option is a sewing needle. thanks. Stick with the vinegar it removes the buildup. Poking at the holes only serves to put the crud into the shower head where it will eventually get flushed back into the holes. cb |
shower head
Cleaning the calcium from the shower head with vinegar is the best DIY
remedy. Have you done any other plumbing jobs in the past six months? Loose debris in the line may be part of the problem, as well. Flush the shower head, in reverse, to remove any loose debris. With the head off, run the water (hot & cold) to flush the pipes, too. Lightly tap on the pipes, if you can, to further dislodge any debris... . anything visible come out? I suppose your house has some age to it..... plumbing, too? Sonny |
shower head
On Mon, 23 Jan 2012 13:17:49 -0800 (PST), DerbyDad03
wrote: On Jan 23, 3:29*pm, JIMMIE wrote: On Jan 23, 3:21*pm, "Doug" wrote: On Mon, 23 Jan 2012 09:44:50 -0800 (PST), Joe wrote: On Jan 23, 10:48 am, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. I live in a hard water area (Houston suburbs) so I expect this is the cause. I've seen in the past saw tv commercials to solve this like using CLR. I'm hesitant to believe the commercials so I ask here. One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). Suggestions?? Thank you. Ask Moen customer service for advice.They know the product, limitations, likely solutions, too. Joe Not a bad idea Joe :) Several years ago, late 70s, I picked up a set of little drill bits and a pin vise. They came like this sold as a tool for cleaning *to acetylene torch tips. I have found a thousand uses for them. Being an electronics technician they received the most use cleaning solder out of printed circuit boards. Jimmie- Hide quoted text - - Show quoted text - "I have found a thousand uses for them" Please list them. Use 1 Use 2 Use 3 Use 4 .. .. .. You can probably complete the list yourself. Thanks. |
shower head
On Mon, 23 Jan 2012 10:48:32 -0600, "Doug"
wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. I live in a hard water area (Houston suburbs) so I expect this is the cause. I've seen in the past saw tv commercials to solve this like using CLR. I'm hesitant to believe the commercials so I ask here. One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). Suggestions?? Thank you. I would take the shower head off, so I don't get any CLR on the rest of the stuff. First, I'd take it off and run a pin backwards thorugh each hole, to get out little stones. If it's deposits, I'd use somethng just big enough. I don't see how that could fail. But if I still wanted to sue clr, if the head disassembles, I'd only use clr on the plate with the holes. |
shower head
"DerbyDad03" wrote in message news:e15ef1f7-9dbd-4093-b054- Several years ago, late 70s, I picked up a set of little drill bits and a pin vise. They came like this sold as a tool for cleaning to acetylene torch tips. I have found a thousand uses for them. Being an electronics technician they received the most use cleaning solder out of printed circuit boards. Jimmie- Hide quoted text - - Show quoted text - "I have found a thousand uses for them" Please list them. Thanks. I use them to ream out the holes in the burners on my gas grill and used one the other day to clear a clog in the nozzle in the windshield washer on my car. |
shower head
On Mon, 23 Jan 2012 21:46:50 -0600, "tom" wrote:
"DerbyDad03" wrote in message news:e15ef1f7-9dbd-4093-b054- Several years ago, late 70s, I picked up a set of little drill bits and a pin vise. They came like this sold as a tool for cleaning to acetylene torch tips. I have found a thousand uses for them. Being an electronics technician they received the most use cleaning solder out of printed circuit boards. Jimmie- Hide quoted text - - Show quoted text - "I have found a thousand uses for them" Please list them. Thanks. I use them to ream out the holes in the burners on my gas grill and used one the other day to clear a clog in the nozzle in the windshield washer on my car. Got a link to them? I want some. What are you chucking them in? --Vic |
shower head
On Mon, 23 Jan 2012 10:48:32 -0600, "Doug"
wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. I live in a hard water area (Houston suburbs) so I expect this is the cause. I've seen in the past saw tv commercials to solve this like using CLR. I'm hesitant to believe the commercials so I ask here. One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). Suggestions?? Thank you. Result..... I decided to take the high road and just submerge the head in a bag of white vinegar taped around it. Funny but after I got it secured in place, the bag sprung a leak but with quick thinking, I got tape to stop it and it worked good enough. I left it submerged for about 9 hours. My wife used the shower after my repair and said it was noticeably better. In hindsight I should have taken the head off but I was so careful when I put it on with plumber's tape 6 months earlier, I didn't really want to disturb it so that was the reason I took the high road. |
shower head
On Mon, 23 Jan 2012 20:49:14 -0500, "Stormin Mormon"
wrote: Several years ago, late 70s, I picked up a set of little drill bits and a pin vise. They came like this sold as a tool for cleaning to acetylene torch tips. I have found a thousand uses for them. Being an "I have found a thousand uses for them" Please list them. Use 1 cleaning solder out of printed circuit boards. Use 2 cleaning solder out of printed circuit boards. Use 3 cleaning solder out of printed circuit boards. Use 4 cleaning solder out of printed circuit boards. Use 5 cleaning solder out of printed circuit boards. Use 6 cleaning solder out of printed circuit boards. Use 7 cleaning solder out of printed circuit boards. Use 8 cleaning solder out of printed circuit boards. Use 9 cleaning solder out of printed circuit boards. Use 10 cleaning solder out of printed circuit boards. Use 11 cleaning solder out of printed circuit boards. Use 12 cleaning solder out of printed circuit boards. Use 13 cleaning solder out of printed circuit boards. Use 14 cleaning solder out of printed circuit boards. Use 15 cleaning solder out of printed circuit boards. Use 16 cleaning solder out of printed circuit boards. Use 17 cleaning solder out of printed circuit boards. Use 18 cleaning solder out of printed circuit boards. Use 19 cleaning solder out of printed circuit boards. Use 21 cleaning solder out of printed circuit boards. Use 22 cleaning solder out of printed circuit boards. Use 23 cleaning solder out of printed circuit boards. Use 24 cleaning solder out of printed circuit boards. Use 25 cleaning solder out of printed circuit boards. Use 26 cleaning solder out of printed circuit boards. Use 27 cleaning solder out of printed circuit boards. Use 28 cleaning solder out of printed circuit boards. Use 29 cleaning solder out of printed circuit boards. Use 30 cleaning solder out of printed circuit boards. Use 31 cleaning solder out of printed circuit boards. Use 32 cleaning solder out of printed circuit boards. Use 33 cleaning solder out of printed circuit boards. Use 34 cleaning solder out of printed circuit boards. Use 35 cleaning solder out of printed circuit boards. Use 36 cleaning solder out of printed circuit boards. Use 37 cleaning solder out of printed circuit boards. Use 38 cleaning solder out of printed circuit boards. Use 39 cleaning solder out of printed circuit boards. Use 40 cleaning solder out of printed circuit boards. Use 41 cleaning solder out of printed circuit boards. Use 42 cleaning solder out of printed circuit boards. Use 43 cleaning solder out of printed circuit boards. Use 44 cleaning solder out of printed circuit boards. Use 45 cleaning solder out of printed circuit boards. Use 46 cleaning solder out of printed circuit boards. Use 47 cleaning solder out of printed circuit boards. Use 48 cleaning solder out of printed circuit boards. Use 49 cleaning solder out of printed circuit boards. Use 50 cleaning solder out of printed circuit boards. Use 51 cleaning solder out of printed circuit boards. Use 52 cleaning solder out of printed circuit boards. Use 53 cleaning solder out of printed circuit boards. Use 54 cleaning solder out of printed circuit boards. Use 55 cleaning solder out of printed circuit boards. Use 56 cleaning solder out of printed circuit boards. Use 57 cleaning solder out of printed circuit boards. Use 58 cleaning solder out of printed circuit boards. Use 69 cleaning solder out of printed circuit boards. (to be continued.......) I missed a couple here.. what was Use 20 and 59 grin ? |
shower head
On Jan 23, 9:45*pm, Vic Smith wrote:
On Mon, 23 Jan 2012 21:46:50 -0600, "tom" wrote: "DerbyDad03" wrote in message news:e15ef1f7-9dbd-4093-b054- Several years ago, late 70s, I picked up a set of little drill bits and a pin vise. They came like this sold as a tool for cleaning to acetylene torch tips. I have found a thousand uses for them. Being an electronics technician they received the most use cleaning solder out of printed circuit boards. Jimmie- Hide quoted text - - Show quoted text - "I have found a thousand uses for them" Please list them. Thanks. I use them to ream out the holes in the burners on my gas grill and used one the other day to clear a clog in the nozzle in the windshield washer on my car. Got a link to them? I want some. What are you chucking them in? --Vic- Hide quoted text - - Show quoted text - A pin vise. Looks much like oe of those bit holders for the miniature screw driver sets except it has a chuck that opens up and closes down just like the usual 3/8" drill. Most peoplel use tip cleaners for torch nozzles and I have used one to clean the car spray nozzles. Do a google for pin vise. You'll get lots of sources for both the vise and drills, mostly in sets. I forget what the name is for those drills. Wire size drill bits? Hawrry K |
shower head
On Jan 23, 3:21*pm, "Doug" wrote:
On Mon, 23 Jan 2012 11:59:16 -0800 (PST), DerbyDad03 wrote: On Jan 23, 2:46*pm, "Doug" wrote: On Mon, 23 Jan 2012 10:22:46 -0800, Oren wrote: On Mon, 23 Jan 2012 10:48:32 -0600, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. * When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. *I live in a hard water area (Houston suburbs) so I expect this is the cause. *I've seen in the past saw tv commercials to solve this like using CLR. *I'm hesitant to believe the commercials so I ask here. *One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). *Suggestions?? * *Thank you. White vinegar will dissolve the sediment in the shower head. *Cost less than CLR. Soak the shower head in a bowl of vinegar. Yes, that's what I decided to do for the time being. * I'll see how it goes tomorrow after 24 hours soaking. * My next approach will be to use a paper clip in holes if needed only. * Thanks Oren... *your help here and earlier posts are helpful ... thanks!!- Hide quoted text - - Show quoted text - Paper clip might be too big. I've used a sewing needle in the past. Maybe, don't know yet. *Next option is a sewing needle. thanks. Acetylene torch tip cleaner? should be inexpensive at your local welding supply. That's assuming you have one of course. Not sure if the Big Boxen sell them... but it's basically a little metal thing about the size of a matchbook with little abrasive coated metal pins in different sizes that fold out, much like one of those cheap Allen wrench sets. nate |
shower head
On Jan 23, 4:26*pm, "Charlie" wrote:
"Oren" wrote in message ... On Mon, 23 Jan 2012 10:48:32 -0600, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. * When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. *I live in a hard water area (Houston suburbs) so I expect this is the cause. *I've seen in the past saw tv commercials to solve this like using CLR. *I'm hesitant to believe the commercials so I ask here. *One thing, I have gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). *Suggestions?? * *Thank you. White vinegar will dissolve the sediment in the shower head. *Cost less than CLR. Soak the shower head in a bowl of vinegar. That's the right answer. Normally I would agree, I know it's safe on chrome plated brass, if it's real gold plating it should be OK as well, if it's "gold-tone" plating who knows? nate |
shower head
On Tue, 24 Jan 2012 07:41:33 -0800 (PST), Harry K
wrote: On Jan 23, 9:45*pm, Vic Smith wrote: On Mon, 23 Jan 2012 21:46:50 -0600, "tom" wrote: "DerbyDad03" wrote in message news:e15ef1f7-9dbd-4093-b054- Several years ago, late 70s, I picked up a set of little drill bits and a pin vise. They came like this sold as a tool for cleaning to acetylene torch tips. I have found a thousand uses for them. Being an electronics technician they received the most use cleaning solder out of printed circuit boards. Jimmie- Hide quoted text - - Show quoted text - "I have found a thousand uses for them" Please list them. Thanks. I use them to ream out the holes in the burners on my gas grill and used one the other day to clear a clog in the nozzle in the windshield washer on my car. Got a link to them? I want some. What are you chucking them in? --Vic- Hide quoted text - - Show quoted text - A pin vise. Looks much like oe of those bit holders for the miniature screw driver sets except it has a chuck that opens up and closes down just like the usual 3/8" drill. Most peoplel use tip cleaners for torch nozzles and I have used one to clean the car spray nozzles. Do a google for pin vise. You'll get lots of sources for both the vise and drills, mostly in sets. I forget what the name is for those drills. Wire size drill bits? A #60 to #80 set is probably what you're after. Diameters are from 0.0135" to 0.035". The biggest problem is losing them! -- croy |
shower head
On Thu, 26 Jan 2012 12:16:18 -0800, croy
wrote: On Tue, 24 Jan 2012 07:41:33 -0800 (PST), Harry K wrote: Do a google for pin vise. You'll get lots of sources for both the vise and drills, mostly in sets. I forget what the name is for those drills. Wire size drill bits? A #60 to #80 set is probably what you're after. Diameters are from 0.0135" to 0.035". The biggest problem is losing them! I already ordered this set. http://www.amazon.com/gp/product/B00...00_i00_details Never heard of them before. Used to put together model kits, mostly ships. Just used nail clippers, a nail file and exacto knife to trim up pieces. But I've got a flaky gas burner here, and these might work to clean it. --Vic |
shower head
N8N wrote in
m: On Jan 23, 3:21*pm, "Doug" wrote: On Mon, 23 Jan 2012 11:59:16 -0800 (PST), DerbyDad03 wrote: On Jan 23, 2:46*pm, "Doug" wrote: On Mon, 23 Jan 2012 10:22:46 -0800, Oren wrote: On Mon, 23 Jan 2012 10:48:32 -0600, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. * When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. *I live in a hard water area (Houston suburbs) so I expect this is the cause. * I've seen in the past saw tv commercials to solve this like using CLR. *I'm hesitant to believe the commercials so I ask here. *One thing, I h ave gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). *Suggestions?? * *Thank you. White vinegar will dissolve the sediment in the shower head. *Cost less than CLR. Soak the shower head in a bowl of vinegar. Yes, that's what I decided to do for the time being. * I'll see how it goes tomorrow after 24 hours soaking. * My next approach will be to use a paper clip in holes if needed only. * Thanks Oren... *your h elp here and earlier posts are helpful ... thanks!!- Hide quoted text - - Show quoted text - Paper clip might be too big. I've used a sewing needle in the past. Maybe, don't know yet. *Next option is a sewing needle. thanks. Acetylene torch tip cleaner? should be inexpensive at your local welding supply. That's assuming you have one of course. Not sure if the Big Boxen sell them... but it's basically a little metal thing about the size of a matchbook with little abrasive coated metal pins in different sizes that fold out, much like one of those cheap Allen wrench sets. nate I am an N scale railroad modeler. I use these minature drill bits and pin vises all the time. I get mine from Micro-Mark http://www.micromark.com/ . I am not associated with MicroMark in any way wxcept as a customer. |
shower head
John Carter wrote in
: N8N wrote in m: On Jan 23, 3:21*pm, "Doug" wrote: On Mon, 23 Jan 2012 11:59:16 -0800 (PST), DerbyDad03 wrote: On Jan 23, 2:46*pm, "Doug" wrote: On Mon, 23 Jan 2012 10:22:46 -0800, Oren wrote: On Mon, 23 Jan 2012 10:48:32 -0600, "Doug" wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. * When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. *I live in a hard water area (Houston suburbs) so I expect this is the cause. * I've seen in the past saw tv commercials to solve this like using CLR. *I'm hesitant to believe the commercials so I ask here. *One thing, I h ave gold metal trim on this shower head so I don't want to hurt the gold trim (perhaps shiny brass??). *Suggestions?? * *Thank you. White vinegar will dissolve the sediment in the shower head. *Cost less than CLR. Soak the shower head in a bowl of vinegar. Yes, that's what I decided to do for the time being. * I'll see how it goes tomorrow after 24 hours soaking. * My next approach will be to use a paper clip in holes if needed only. * Thanks Oren... *your h elp here and earlier posts are helpful ... thanks!!- Hide quoted text - - Show quoted text - Paper clip might be too big. I've used a sewing needle in the past. Maybe, don't know yet. *Next option is a sewing needle. thanks. Acetylene torch tip cleaner? should be inexpensive at your local welding supply. That's assuming you have one of course. Not sure if the Big Boxen sell them... but it's basically a little metal thing about the size of a matchbook with little abrasive coated metal pins in different sizes that fold out, much like one of those cheap Allen wrench sets. nate I am an N scale railroad modeler. I use these minature drill bits and pin vises all the time. I get mine from Micro-Mark http://www.micromark.com/ . I am not associated with MicroMark in any way wxcept as a customer. household VINEGAR will remove those mineral deposits,and cheaper than CLR or Lime-Away. all of them are mild acids. did you bother to check the Moen website? maybe they have cleaning info. the "gold"(brass?) plating may be titanium nitride,and not much is going to harm that. brass plating would need a coating to prevent tarnish,TiN doesn't tarnish. "John Carter";interesting.... are you familiar with Edgar Rice Burrough's Martian series? Have you seen Princess of Mars or John Carter of Mars? -- Jim Yanik jyanik at localnet dot com |
shower head
wrote: Recently (maybe 6 months ago) I replaced my 14 year old moen shower head with another moen shower head. * When I first replaced it all worked fine but now I'm noticing some streams of water thru the head go in another (slanted) direction rather than straight. *I live in a hard water area (Houston suburbs) so I expect this is the cause. The problem is Energy Star madness. 14 years ago you could buy a showerhead that was self cleaning by virtue of the fact that the holes were large enough that the flow of water would clean the mineral deposits. These days, Water Sense shower heads are limited to less than 2 gpm, even less than the previous low flow 2.5 gpm heads. The only way you can get any kind of performance with that low a flow is to make needle size holes that plug up in the presence of any kind of mineral deposit. So you get a crappy shower and get to constantly clean or replace the shower head. |
shower head
Jim Yanik wrote in
4: John Carter wrote in : snip "John Carter";interesting.... are you familiar with Edgar Rice Burrough's Martian series? Have you seen Princess of Mars or John Carter of Mars? I have been told of this one, but I more often am asked if I am that Dr. John Carter from the old TV series "ER". I do have a PhD and where I received my degree, they told me I should use the title, I did only professionally. SInce I retired, I am just plain old John Cartr. |
| All times are GMT +1. The time now is 07:11 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter