Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Load center replacement
I'm thinking mabee it's time to replace my old fuse panel with a
breaker panel. Problem is, the new panels are not even a close match to the old panel. The existing panel is surface mounted with the main switch/fuse on the left, with the power feed coming in from the back in the lower corner. All the "load" wires come in the top. They come out through the plywood service board and then enter thepanel within inches. This does not allow much flexibility. The closest I've found so far is a Schnieder StabLok panel, but I would need to mount it sideways. No problem with the main breaker as it would be oriented on up, as required by code. The feed would need to come in through an elbow through the bottom of the box instead of the back as the new panel is significantly smaller. I can make all this work - but then half of the load breakers are upside-down. Don't know if that is an issue here in Canada - aparently it is not allowed in the USA. I guess I could always restrict myself to half capacity (use a 40 circuit panel as a 20) The only problem I can forsee is some know-it-all home inspector seeing the FPE on the panel and demanding a future buyer replace the dang thing because early FPE StabLok breakers got a REAL bad name in the USA (rightly or wrongly). We will likely be selling in the next 5 years or so (which is the MAJOR reason I'm even thinking about replacing the panel in the firstr place. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Load Center Orientation | Home Repair | |||
what size breaker for load center? | Home Repair | |||
Load center and circuirt breaker questions | Home Repair | |||
Load Center Bus Bar | Home Repair | |||
No space in the load center | Home Repair |