Clean up OC foam on hardwood
 

I've got a couple small areas of hardwood floor that caught some fine
overspray of open cell foam that was being applied to a vertical duct.
What i'm wanting to know is there a product (acetone, lacquer thinner,
minerial sprits, etc.) that will cut this foam without cutting the
waterborne poly that is on the floor. I could always touch up the floor
poly, but if i don't have to that'd be better.
--
Steve Barker
remove the "not" from my address to email

Clean up OC foam on hardwood
 

In ,
Steve Barker spewed forth:
I've got a couple small areas of hardwood floor that caught some fine
overspray of open cell foam that was being applied to a vertical
duct.
What i'm wanting to know is there a product (acetone, lacquer
thinner,
minerial sprits, etc.) that will cut this foam without cutting the
waterborne poly that is on the floor. I could always touch up the
floor poly, but if i don't have to that'd be better.

try some WD40

Clean up OC foam on hardwood
 

"Steve Barker" wrote in message
...
I've got a couple small areas of hardwood floor that caught some fine
overspray of open cell foam that was being applied to a vertical duct.
What i'm wanting to know is there a product (acetone, lacquer thinner,
minerial sprits, etc.) that will cut this foam without cutting the
waterborne poly that is on the floor. I could always touch up the floor
poly, but if i don't have to that'd be better.
--
Steve Barker
remove the "not" from my address to email

The "Great Stuff spray foam says use Acetone. I don't know what foam you
used. WW