Krups 2-slice toaster disassembly
 

I have a Krups 2-slice toaster like this one:
http://www.krupsusa.com/NR/rdonlyres...MFEP_multi.pdf

I’m trying to disassemble it to have a look at the circuit board to
see if it can be modified or adjusted to make darker toast.

The front handle/lever is used for raising or lowering the toast.
Does anyone know how to remove it? It doesn’t seem obvious and I’d
like to avoid breaking it.

Krups 2-slice toaster disassembly
 

On May 3, 11:02*pm, "Denis G." wrote:
I have a Krups 2-slice toaster like this one:http://www.krupsusa.com/NR/rdonlyres...-8E5B-1B377C0F...

I’m trying to disassemble it to have a look at the circuit board to
see if it can be modified or adjusted to make darker toast.

The front handle/lever is used for raising or lowering the toast.
Does anyone know how to remove it? *It doesn’t seem obvious and I’d
like to avoid breaking it.

I doubt you will find someone with specific experience taking apart
that particular toaster in this group. Often plastic levels and knobs
that attach to metal mechanical parts are a slip on fit. Try pulling
while wiggling it a bit. It's up to you to judge when you are about
to beak it instead of remove it. Most small appliances are not really
intended to be repaired so they are not manufactured for easy
disassembly.

Krups 2-slice toaster disassembly
 

On May 4, 6:27*am, jamesgangnc wrote:
On May 3, 11:02*pm, "Denis G." wrote:

I have a Krups 2-slice toaster like this one:http://www.krupsusa.com/NR/rdonlyres...-8E5B-1B377C0F...

I’m trying to disassemble it to have a look at the circuit board to
see if it can be modified or adjusted to make darker toast.

The front handle/lever is used for raising or lowering the toast.
Does anyone know how to remove it? *It doesn’t seem obvious and I’d
like to avoid breaking it.

I doubt you will find someone with specific experience taking apart
that particular toaster in this group. *Often plastic levels and knobs
that attach to metal mechanical parts are a slip on fit. *Try pulling
while wiggling it a bit. * It's up to you to judge when you are about
to beak it instead of remove it. *Most small appliances are not really
intended to be repaired so they are not manufactured for easy
disassembly.

Ok, thanks. I've taken apart other brands in the past. I've used a
bobby pin to retract a spring clip holding a lever handle, but I don't
see one on this. Sometimes I only find out how things are assembled
after I break them.

Krups 2-slice toaster disassembly
 

On May 4, 10:09*am, "Denis G." wrote:
On May 4, 6:27*am, jamesgangnc wrote:





On May 3, 11:02*pm, "Denis G." wrote:

I have a Krups 2-slice toaster like this one:http://www.krupsusa.com/NR/rdonlyres...-8E5B-1B377C0F...

I’m trying to disassemble it to have a look at the circuit board to
see if it can be modified or adjusted to make darker toast.

The front handle/lever is used for raising or lowering the toast.
Does anyone know how to remove it? *It doesn’t seem obvious and I’d
like to avoid breaking it.

I doubt you will find someone with specific experience taking apart
that particular toaster in this group. *Often plastic levels and knobs
that attach to metal mechanical parts are a slip on fit. *Try pulling
while wiggling it a bit. * It's up to you to judge when you are about
to beak it instead of remove it. *Most small appliances are not really
intended to be repaired so they are not manufactured for easy
disassembly.

Ok, thanks. *I've taken apart other brands in the past. *I've used a
bobby pin to retract a spring clip holding a lever handle, but I don't
see one on this. *Sometimes I only find out how things are assembled
after I break them.- Hide quoted text -

- Show quoted text -

I think we've all done that a few times.

Is it really electronically controlled?

Krups 2-slice toaster disassembly
 

On May 4, 9:14*am, jamesgangnc wrote:
On May 4, 10:09*am, "Denis G." wrote:





On May 4, 6:27*am, jamesgangnc wrote:

On May 3, 11:02*pm, "Denis G." wrote:

I have a Krups 2-slice toaster like this one:http://www.krupsusa.com/NR/rdonlyres...-8E5B-1B377C0F...

I’m trying to disassemble it to have a look at the circuit board to
see if it can be modified or adjusted to make darker toast.

The front handle/lever is used for raising or lowering the toast.
Does anyone know how to remove it? *It doesn’t seem obvious and I’d
like to avoid breaking it.

I doubt you will find someone with specific experience taking apart
that particular toaster in this group. *Often plastic levels and knobs
that attach to metal mechanical parts are a slip on fit. *Try pulling
while wiggling it a bit. * It's up to you to judge when you are about
to beak it instead of remove it. *Most small appliances are not really
intended to be repaired so they are not manufactured for easy
disassembly.

Ok, thanks. *I've taken apart other brands in the past. *I've used a
bobby pin to retract a spring clip holding a lever handle, but I don't
see one on this. *Sometimes I only find out how things are assembled
after I break them.- Hide quoted text -

- Show quoted text -

I think we've all done that a few times.

Is it really electronically controlled?- Hide quoted text -

- Show quoted text -

Yes, I can see a small circuit board with a resistor and a capacitor
mounted inside in the lower front section. Despite all the
sophistication of the newer models, I think that the old toasters
worked better.

Krups 2-slice toaster disassembly
 

On May 4, 9:09*am, "Denis G." wrote:
On May 4, 6:27*am, jamesgangnc wrote:





On May 3, 11:02*pm, "Denis G." wrote:

I have a Krups 2-slice toaster like this one:http://www.krupsusa.com/NR/rdonlyres...-8E5B-1B377C0F...

I’m trying to disassemble it to have a look at the circuit board to
see if it can be modified or adjusted to make darker toast.

The front handle/lever is used for raising or lowering the toast.
Does anyone know how to remove it? *It doesn’t seem obvious and I’d
like to avoid breaking it.

I doubt you will find someone with specific experience taking apart
that particular toaster in this group. *Often plastic levels and knobs
that attach to metal mechanical parts are a slip on fit. *Try pulling
while wiggling it a bit. * It's up to you to judge when you are about
to beak it instead of remove it. *Most small appliances are not really
intended to be repaired so they are not manufactured for easy
disassembly.

Ok, thanks. *I've taken apart other brands in the past. *I've used a
bobby pin to retract a spring clip holding a lever handle, but I don't
see one on this. *Sometimes I only find out how things are assembled
after I break them.- Hide quoted text -

- Show quoted text -

Yeah, but it still can be fun to try to imagine how things are
assembled at the factory.

Krups 2-slice toaster disassembly
 

On May 4, 9:33*am, "Denis G." wrote:
On May 4, 9:14*am, jamesgangnc wrote:





On May 4, 10:09*am, "Denis G." wrote:

On May 4, 6:27*am, jamesgangnc wrote:

On May 3, 11:02*pm, "Denis G." wrote:

I have a Krups 2-slice toaster like this one:http://www.krupsusa.com/NR/rdonlyres...-8E5B-1B377C0F...

I’m trying to disassemble it to have a look at the circuit board to
see if it can be modified or adjusted to make darker toast.

The front handle/lever is used for raising or lowering the toast.
Does anyone know how to remove it? *It doesn’t seem obvious and I’d
like to avoid breaking it.

I doubt you will find someone with specific experience taking apart
that particular toaster in this group. *Often plastic levels and knobs
that attach to metal mechanical parts are a slip on fit. *Try pulling
while wiggling it a bit. * It's up to you to judge when you are about
to beak it instead of remove it. *Most small appliances are not really
intended to be repaired so they are not manufactured for easy
disassembly.

Ok, thanks. *I've taken apart other brands in the past. *I've used a
bobby pin to retract a spring clip holding a lever handle, but I don't
see one on this. *Sometimes I only find out how things are assembled
after I break them.- Hide quoted text -

- Show quoted text -

I think we've all done that a few times.

Is it really electronically controlled?- Hide quoted text -

- Show quoted text -

Yes, I can see a small circuit board with a resistor and a capacitor
mounted inside in the lower front section. *Despite all the
sophistication of the newer models, I think that the old toasters
worked better.- Hide quoted text -

- Show quoted text -

The really old ones where the sides folded down and that in itself
flipped the bread over were simpicity itself, But you did have to
remember to flip the bread at the right time.

Krups 2-slice toaster disassembly
 

On May 4, 10:18*am, "hr(bob) "
wrote:
On May 4, 9:09*am, "Denis G." wrote:





On May 4, 6:27*am, jamesgangnc wrote:

On May 3, 11:02*pm, "Denis G." wrote:

I have a Krups 2-slice toaster like this one:http://www.krupsusa.com/NR/rdonlyres...-8E5B-1B377C0F...

I’m trying to disassemble it to have a look at the circuit board to
see if it can be modified or adjusted to make darker toast.

The front handle/lever is used for raising or lowering the toast.
Does anyone know how to remove it? *It doesn’t seem obvious and I’d
like to avoid breaking it.

I doubt you will find someone with specific experience taking apart
that particular toaster in this group. *Often plastic levels and knobs
that attach to metal mechanical parts are a slip on fit. *Try pulling
while wiggling it a bit. * It's up to you to judge when you are about
to beak it instead of remove it. *Most small appliances are not really
intended to be repaired so they are not manufactured for easy
disassembly.

Ok, thanks. *I've taken apart other brands in the past. *I've used a
bobby pin to retract a spring clip holding a lever handle, but I don't
see one on this. *Sometimes I only find out how things are assembled
after I break them.- Hide quoted text -

- Show quoted text -

Yeah, but it still can be fun to try to imagine how things are
assembled at the factory.- Hide quoted text -

- Show quoted text -

Yes. Sometimes I like good puzzles. Sometimes I just want good toast.