Water heater blanket for furnace supply plenum?
 

We have several high efficiency gas furnaces. The furnace itself is
cool to the touch as are the insulated ducts. The only warm-to-hot part
is the sheet metal supply plenum that is uninsulated.

Since the furance is in our unfinished basement, it seems logical to
insulate the plenum right?

- Would a water heater blanket work well to insulate the plenum?
- Any other suggestions for insultating material? (I know regular
fiberglass batts are cheaper but I don't know if they are rated for
contact with a supply plenum)?

Also as a related question, we have a circa 2003 water heater who
outside is barely warm to the touch (if at all). Would there still be
any measurably signiicant benefit to wrapping it in a water heater
blanket or is it already well insulated enough?

Thanks!

Water heater blanket for furnace supply plenum?
 

We have several high efficiency gas furnaces. The furnace itself is
cool to the touch as are the insulated ducts. The only warm-to-hot part
is the sheet metal supply plenum that is uninsulated.

Since the furance is in our unfinished basement, it seems logical to
insulate the plenum right?

- Would a water heater blanket work well to insulate the plenum?
- Any other suggestions for insultating material? (I know regular
fiberglass batts are cheaper but I don't know if they are rated for
contact with a supply plenum)?

Also as a related question, we have a circa 2003 water heater who
outside is barely warm to the touch (if at all). Would there still be
any measurably signiicant benefit to wrapping it in a water heater
blanket or is it already well insulated enough?


*There is insulation made for ducts. You can usually buy a roll at a
plumbing supply. I have seen small rolls at Home Depot.

Water heater blanket for furnace supply plenum?
 

"blueman" wrote in message
...
We have several high efficiency gas furnaces. The furnace itself is
cool to the touch as are the insulated ducts. The only warm-to-hot part
is the sheet metal supply plenum that is uninsulated.

Since the furance is in our unfinished basement, it seems logical to
insulate the plenum right?

- Would a water heater blanket work well to insulate the plenum?
- Any other suggestions for insultating material? (I know regular
fiberglass batts are cheaper but I don't know if they are rated for
contact with a supply plenum)?

Also as a related question, we have a circa 2003 water heater who
outside is barely warm to the touch (if at all). Would there still be
any measurably signiicant benefit to wrapping it in a water heater
blanket or is it already well insulated enough?

Thanks!

Your ROI, return on investment is minimal for either of these in an
unfinished basement. Heat rises.


--
Colbyt
Please come visit http://www.househomerepair.com

Water heater blanket for furnace supply plenum?
 

"Colbyt" writes:
"blueman" wrote in message
...
We have several high efficiency gas furnaces. The furnace itself is
cool to the touch as are the insulated ducts. The only warm-to-hot part
is the sheet metal supply plenum that is uninsulated.

Since the furance is in our unfinished basement, it seems logical to
insulate the plenum right?

- Would a water heater blanket work well to insulate the plenum?
- Any other suggestions for insultating material? (I know regular
fiberglass batts are cheaper but I don't know if they are rated for
contact with a supply plenum)?

Also as a related question, we have a circa 2003 water heater who
outside is barely warm to the touch (if at all). Would there still be
any measurably signiicant benefit to wrapping it in a water heater
blanket or is it already well insulated enough?

Thanks!

Your ROI, return on investment is minimal for either of these in an
unfinished basement. Heat rises.

True about heat risin but still the 5 sides (floors & walls) are
uninsulated stone & concrete so doesn't heat radiate there too. Even if
"most" goes up into the house, doesn't the rest go out?

Water heater blanket for furnace supply plenum?
 

"Colbyt" writes:
"blueman" wrote in message
...
We have several high efficiency gas furnaces. The furnace itself is
cool to the touch as are the insulated ducts. The only warm-to-hot part
is the sheet metal supply plenum that is uninsulated.

Since the furance is in our unfinished basement, it seems logical to
insulate the plenum right?

- Would a water heater blanket work well to insulate the plenum?
- Any other suggestions for insultating material? (I know regular
fiberglass batts are cheaper but I don't know if they are rated for
contact with a supply plenum)?

Also as a related question, we have a circa 2003 water heater who
outside is barely warm to the touch (if at all). Would there still be
any measurably signiicant benefit to wrapping it in a water heater
blanket or is it already well insulated enough?

Thanks!

Your ROI, return on investment is minimal for either of these in an
unfinished basement. Heat rises.

True about heat risin but still the 5 sides (floors & walls) are
uninsulated stone & concrete so doesn't heat radiate there too. Even if
"most" goes up into the house, doesn't the rest go out?

Water heater blanket for furnace supply plenum?
 

On Nov 7, 3:31*pm, blueman wrote:
"Colbyt" writes:
"blueman" wrote in message
...
We have several high efficiency gas furnaces. The *furnace itself is
cool to the touch as are the insulated ducts. The only warm-to-hot part
is the sheet metal supply plenum that is uninsulated.

Since the furance is in our unfinished basement, it seems logical to
insulate the plenum right?

- Would a water heater blanket work well to insulate the plenum?
- Any other suggestions for insultating material? (I know regular
*fiberglass batts are cheaper but I don't know if they are rated for
*contact with a supply plenum)?

Also as a related question, we have a circa 2003 water heater who
outside is barely warm to the touch (if at all). Would there still be
any measurably signiicant benefit to wrapping it in a water heater
blanket or is it already well insulated enough?

Thanks!

Your ROI, return on investment is minimal for either of these in an
unfinished basement. *Heat rises.

True about heat risin but still the 5 sides (floors & walls) are
uninsulated stone & concrete so doesn't heat radiate there too. Even if
"most" goes up into the house, doesn't the rest go out?- Hide quoted text -

- Show quoted text -

I would like warm floors and insulate around the perimeter of the
basement/crawl space.

Water heater blanket for furnace supply plenum?
 

On Nov 7, 4:31*pm, blueman wrote:
"Colbyt" writes:
"blueman" wrote in message
...
We have several high efficiency gas furnaces. The *furnace itself is
cool to the touch as are the insulated ducts. The only warm-to-hot part
is the sheet metal supply plenum that is uninsulated.

Since the furance is in our unfinished basement, it seems logical to
insulate the plenum right?

- Would a water heater blanket work well to insulate the plenum?
- Any other suggestions for insultating material? (I know regular
*fiberglass batts are cheaper but I don't know if they are rated for
*contact with a supply plenum)?

Also as a related question, we have a circa 2003 water heater who
outside is barely warm to the touch (if at all). Would there still be
any measurably signiicant benefit to wrapping it in a water heater
blanket or is it already well insulated enough?

Thanks!

Your ROI, return on investment is minimal for either of these in an
unfinished basement. *Heat rises.

True about heat risin but still the 5 sides (floors & walls) are
uninsulated stone & concrete so doesn't heat radiate there too. Even if
"most" goes up into the house, doesn't the rest go out?

Heat also radiates downward and in all directions. A warm upstairs
is still heating the downstairs, somewhat.

Insulating the basement will reduce overall energy consumption.

Water heater blanket for furnace supply plenum?
 

On Nov 9, 3:56*pm, zek wrote:
On Nov 7, 4:31*pm, blueman wrote:





"Colbyt" writes:
"blueman" wrote in message
...
We have several high efficiency gas furnaces. The *furnace itself is
cool to the touch as are the insulated ducts. The only warm-to-hot part
is the sheet metal supply plenum that is uninsulated.

Since the furance is in our unfinished basement, it seems logical to
insulate the plenum right?

- Would a water heater blanket work well to insulate the plenum?
- Any other suggestions for insultating material? (I know regular
*fiberglass batts are cheaper but I don't know if they are rated for
*contact with a supply plenum)?

Also as a related question, we have a circa 2003 water heater who
outside is barely warm to the touch (if at all). Would there still be
any measurably signiicant benefit to wrapping it in a water heater
blanket or is it already well insulated enough?

Thanks!

Your ROI, return on investment is minimal for either of these in an
unfinished basement. *Heat rises.

True about heat risin but still the 5 sides (floors & walls) are
uninsulated stone & concrete so doesn't heat radiate there too. Even if
"most" goes up into the house, doesn't the rest go out?

Heat also radiates downward and in all directions. A warm upstairs
is still heating the downstairs, somewhat.

Insulating the basement will reduce overall energy consumption.- Hide quoted text -

- Show quoted text -

unless it allows the basement to get too cold and freeze water using
appliances and lines

Water heater blanket for furnace supply plenum?
 

On Tue, 9 Nov 2010 16:14:56 -0800 (PST), "
wrote:

On Nov 9, 3:56Â*pm, zek wrote:
On Nov 7, 4:31Â*pm, blueman wrote:





"Colbyt" writes:
"blueman" wrote in message
...
We have several high efficiency gas furnaces. The Â*furnace itself is
cool to the touch as are the insulated ducts. The only warm-to-hot part
is the sheet metal supply plenum that is uninsulated.

Since the furance is in our unfinished basement, it seems logical to
insulate the plenum right?

- Would a water heater blanket work well to insulate the plenum?
- Any other suggestions for insultating material? (I know regular
Â*fiberglass batts are cheaper but I don't know if they are rated for
Â*contact with a supply plenum)?

Also as a related question, we have a circa 2003 water heater who
outside is barely warm to the touch (if at all). Would there still be
any measurably signiicant benefit to wrapping it in a water heater
blanket or is it already well insulated enough?

Thanks!

Your ROI, return on investment is minimal for either of these in an
unfinished basement. Â*Heat rises.

True about heat risin but still the 5 sides (floors & walls) are
uninsulated stone & concrete so doesn't heat radiate there too. Even if
"most" goes up into the house, doesn't the rest go out?

Heat also radiates downward and in all directions. A warm upstairs
is still heating the downstairs, somewhat.

Insulating the basement will reduce overall energy consumption.- Hide quoted text -

- Show quoted text -

unless it allows the basement to get too cold and freeze water using
appliances and lines
And HOW can insulating the basement allow the pipes to freeze when
they don't in a non-insulated basement????
We are not tlaking insulating the loor between the basement and the
main floor - we are talking insulating the outside walls of the
basement - keeping the heat in. Thia way any heat lost by the furnace,
hot water heater, duct work, etc - as well as heat lost through the
floor, goes to heat the basement - keeping the floors warmer and
reducing overal heating costs.