Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 8
Default Cat 6 as thermostat wire

Hi,

Can Cat 6 wire (not sure of solid or stranded) be used as thermostat
wire? I have 1000ft of the former and none of the latter!

Thanks in advance.
  #2   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1,473
Default Cat 6 as thermostat wire


"Jennifer Eden" wrote in message
...
Hi,

Can Cat 6 wire (not sure of solid or stranded) be used as thermostat
wire? I have 1000ft of the former and none of the latter!

Thanks in advance.


Typical heating/ cooling systems require 18 gauge, cat5 is 24, making it too
small for the requirement, which is not to say that it won't work,
especially if it's a short run.


  #3   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 673
Default Cat 6 as thermostat wire

On 9/12/2010 12:22 PM, RBM wrote:
"Jennifer wrote in message
...
Hi,

Can Cat 6 wire (not sure of solid or stranded) be used as thermostat
wire? I have 1000ft of the former and none of the latter!

Thanks in advance.


Typical heating/ cooling systems require 18 gauge, cat5 is 24, making it too
small for the requirement, which is not to say that it won't work,
especially if it's a short run.


I'm thinking the current requirements of modern thermostats/furnaces
is pretty low.

http://www.powerstream.com/Wire_Size.htm

Rates 24 at .57A for power transmission. That would seem to be plenty.
Most volt ohm meters have a current scale, if the OP wishes to check.

I suppose you could wire the 4 pairs in cat 6 in parallel which would
give the same capacity, that would seem unlikely to be needed, but I
know little about thermostats.

Jeff
  #4   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 179
Default Cat 6 as thermostat wire

It's good to use what's designed for the usage. That way, the next
people who work on the system will be less confused. "Hey, bub...
isn't that phone wire? What's that doing inside a furnace?" "Dunno.
Lets rip it out."

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"RBM" wrote in message
...

"Jennifer Eden" wrote in message
...
Hi,

Can Cat 6 wire (not sure of solid or stranded) be used as thermostat
wire? I have 1000ft of the former and none of the latter!

Thanks in advance.


Typical heating/ cooling systems require 18 gauge, cat5 is 24, making
it too
small for the requirement, which is not to say that it won't work,
especially if it's a short run.



  #5   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 5,149
Default Cat 6 as thermostat wire

On 9/12/2010 9:25 PM, Stormin Mormon wrote:
It's good to use what's designed for the usage. That way, the next
people who work on the system will be less confused. "Hey, bub...
isn't that phone wire? What's that doing inside a furnace?" "Dunno.
Lets rip it out."


On this, at least, we agree. Avoid doing things in non-standard ways,
but if/when you have to, leave notes for the next guy. Either yourself
in five years when you won't remember what the heck you did, or some
poor tradesman in 20 years after your heirs start fixing the place up to
sell it off.

--
aem sends...


  #6   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 179
Default Cat 6 as thermostat wire

I've also found to avoid the absence of not using double negatives to
contradict the refutation that previously rescinded the cancellation
which had previously but not at present been issued to disregard the
information which had been revoked.

Yeah, I'm funning with you. Once in a while I see a double negative
like "avoiding non". Just gets me to thinking that it's often easier
to write in positive voice. Sometimes I've no clue why the standard is
this or that way. And some times I do things in the usual way. But,
not always....

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"aemeijers" wrote in message
...
On 9/12/2010 9:25 PM, Stormin Mormon wrote:
It's good to use what's designed for the usage. That way, the next
people who work on the system will be less confused. "Hey, bub...
isn't that phone wire? What's that doing inside a furnace?" "Dunno.
Lets rip it out."


On this, at least, we agree. Avoid doing things in non-standard ways,
but if/when you have to, leave notes for the next guy. Either yourself
in five years when you won't remember what the heck you did, or some
poor tradesman in 20 years after your heirs start fixing the place up
to
sell it off.

--
aem sends...


  #7   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 6,199
Default Cat 6 as thermostat wire


It's good to use what's designed for the usage. That way, the next
people who work on the system will be less confused. "Hey, bub...
isn't that phone wire? What's that doing inside a furnace?" "Dunno.
Lets rip it out."



saves questions by home inspectors too..........
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
thermostat wire bill allemann Home Repair 8 January 5th 08 12:49 AM
Thermostat wire Golan UK diy 7 November 14th 06 10:05 AM
New Thermostat + 2 Wire System (problems) CBHVAC Home Repair 0 December 3rd 05 09:19 AM
Thermostat wire needed [email protected] Home Repair 27 May 12th 05 02:30 PM
2 wire thermostat manxman UK diy 4 November 29th 04 01:00 PM


All times are GMT +1. The time now is 06:49 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"