Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
hardwood floor finish not applied under DW or fridge
"BobC" wrote in message ... We just had our hardwood floors finished and while inspecting the work I noticed: a)that the polyurethane stopped just in front of the dishwasher and the refrigerator. In other words, the two appliances are sitting over unsanded, bare wood (this is a new oak floor that replaces many layers of old vinyl). b) two wood thresholds, bridging bathroom tile floors and hardwood hallways, have uncoated areas on the bathroom side, where they meet the flor. Q: These are places likely to get pretty wet, and I think they should be fully coated, or am I being finicky? c)unlike the floors, which have a smooth finish, the staircase threads are quite rough and appear to have received fewer finish coats. Q: would this be on purpose, to make them less slippery? Many thanks. Why were appliances returned to the kitchen before the flooring was finished. They obviously had to be removed for the flooring to be installed. My guess is that the finisher had not planned on removing them prior to finishing the floor. The "holidays" on the thresholds are inexcusable and need a return visit by the finisher. The stair treads need to be smooth. If they're not satisfactory, the a return visit by the finisher is needed. They are not left rough for any reason I know of. Nonny |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
hardwood floor finish not applied under DW or fridge | Home Repair | |||
Adding a coat of finish to hardwood floor | Home Repair | |||
hardwood floor finish | Home Repair | |||
Should finish be applied or not? | Woodworking |