Back-Flow Preventer
 

I had a back-flow preventer installed last fall. It works fine but I have a
question. There is usually about 1 inch of water inside the housing. When
I open up the inspection cover, it drains away but more enters after a short
while. My question is this: Is this normal? If not what do I do to
resolve the problem.

Back-Flow Preventer
 

Well, since it's in the sump pump crock, it ought not be a big
problem.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"Ultraglide" wrote in message
...
I had a back-flow preventer installed last fall. It works fine but I
have a
question. There is usually about 1 inch of water inside the housing.
When
I open up the inspection cover, it drains away but more enters after a
short
while. My question is this: Is this normal? If not what do I do to
resolve the problem.

Back-Flow Preventer
 

In ,
Ultraglide typed:
I had a back-flow preventer installed last fall.

On what?

It works
fine but I have a question. There is usually about 1 inch
of water inside the housing.

What housing?

When I open up the inspection
cover, it drains away but more enters after a short while. My question is
this: Is this normal?

Depends on what it is, how it's assembled, and what the overall system
structure is.

If not what do I do
to resolve the problem.

You might start by putting together a clear, concise description of your
problem and a clear, concise phrasing of what you need to know. I suspect
it's a sump pump but that's a small part of what needs to be known.

-- How to Post to a newsgroup:
http://word.mvps.org/findhelp/whichnewgrp.htm

http://www.ehow.com/how_5681_post-ne...-internet.html

Sump Pumps 101:

http://home.howstuffworks.com/home-i.../sump-pump.htm

http://www.doityourself.com/stry/sumppumpswork

http://www.sump-pump-info.com/articles.html


HTH,

Twayne`

Back-Flow Preventer
 

Nowhere did I say anything about sump pumps. This is simply a back flow
preventer with a check valve. The valve is installed in the sanitary drain
about a foot and a half below the floor in the basement. There is a
box-shaped housing which goes over the top of the valve. There is an
inspection cover which can be unscrewed to check the operation of the valve.

"Twayne" wrote in message
...
In ,
Ultraglide typed:
I had a back-flow preventer installed last fall.

On what?

It works
fine but I have a question. There is usually about 1 inch
of water inside the housing.

What housing?

When I open up the inspection
cover, it drains away but more enters after a short while. My question is
this: Is this normal?

Depends on what it is, how it's assembled, and what the overall system
structure is.

If not what do I do
to resolve the problem.

You might start by putting together a clear, concise description of your
problem and a clear, concise phrasing of what you need to know. I suspect
it's a sump pump but that's a small part of what needs to be known.

-- How to Post to a newsgroup:
http://word.mvps.org/findhelp/whichnewgrp.htm

http://www.ehow.com/how_5681_post-ne...-internet.html

Sump Pumps 101:

http://home.howstuffworks.com/home-i.../sump-pump.htm

http://www.doityourself.com/stry/sumppumpswork

http://www.sump-pump-info.com/articles.html


HTH,

Twayne`

Back-Flow Preventer
 

No where did you say anything about a sanitary drain.

Anyhow, back to sump pumps. The backflow preventer is typically right
at the discharge line. It's in the sump crock, so it's not a big issue
if it leaks a bit.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"Ultraglide" wrote in message
...
Nowhere did I say anything about sump pumps. This is simply a back
flow
preventer with a check valve. The valve is installed in the sanitary
drain
about a foot and a half below the floor in the basement. There is a
box-shaped housing which goes over the top of the valve. There is an
inspection cover which can be unscrewed to check the operation of the
valve.

"Twayne" wrote in message
...
In ,
Ultraglide typed:
I had a back-flow preventer installed last fall.

On what?

It works
fine but I have a question. There is usually about 1 inch
of water inside the housing.

What housing?

When I open up the inspection
cover, it drains away but more enters after a short while. My
question is
this: Is this normal?

Depends on what it is, how it's assembled, and what the overall
system
structure is.

If not what do I do
to resolve the problem.

You might start by putting together a clear, concise description of
your
problem and a clear, concise phrasing of what you need to know. I
suspect
it's a sump pump but that's a small part of what needs to be known.

-- How to Post to a newsgroup:
http://word.mvps.org/findhelp/whichnewgrp.htm

http://www.ehow.com/how_5681_post-ne...-internet.html

Sump Pumps 101:

http://home.howstuffworks.com/home-i.../sump-pump.htm

http://www.doityourself.com/stry/sumppumpswork

http://www.sump-pump-info.com/articles.html


HTH,

Twayne`

Back-Flow Preventer
 

On Jul 9, 6:08*pm, "Ultraglide"
wrote:
I had a back-flow preventer installed last fall. *It works fine but I have a
question. *There is usually about 1 inch of water inside the housing. *When
I open up the inspection cover, it drains away but more enters after a short
while. *My question is this: *Is this normal? *If not what do I do to
resolve the problem.

Doesn't sound like a problem tome.

Back-Flow Preventer
 

How many times do I have to tell you, there is no sump pump. There was
never any sump pump. It is to stop the sanitary storm sewer from backing up
when there is heavy rainfall and the storm sewer is overloaded. If you
don't know what a back-up preventer is find some other poster to waste time
on.

"Stormin Mormon" wrote in message
...
No where did you say anything about a sanitary drain.

Anyhow, back to sump pumps. The backflow preventer is typically right
at the discharge line. It's in the sump crock, so it's not a big issue
if it leaks a bit.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
.


"Ultraglide" wrote in message
...
Nowhere did I say anything about sump pumps. This is simply a back
flow
preventer with a check valve. The valve is installed in the sanitary
drain
about a foot and a half below the floor in the basement. There is a
box-shaped housing which goes over the top of the valve. There is an
inspection cover which can be unscrewed to check the operation of the
valve.

"Twayne" wrote in message
...
In ,
Ultraglide typed:
I had a back-flow preventer installed last fall.

On what?

It works
fine but I have a question. There is usually about 1 inch
of water inside the housing.

What housing?

When I open up the inspection
cover, it drains away but more enters after a short while. My
question is
this: Is this normal?

Depends on what it is, how it's assembled, and what the overall
system
structure is.

If not what do I do
to resolve the problem.

You might start by putting together a clear, concise description of
your
problem and a clear, concise phrasing of what you need to know. I
suspect
it's a sump pump but that's a small part of what needs to be known.

-- How to Post to a newsgroup:
http://word.mvps.org/findhelp/whichnewgrp.htm

http://www.ehow.com/how_5681_post-ne...-internet.html

Sump Pumps 101:

http://home.howstuffworks.com/home-i.../sump-pump.htm

http://www.doityourself.com/stry/sumppumpswork

http://www.sump-pump-info.com/articles.html


HTH,

Twayne`

Back-Flow Preventer
 

Ultraglide wrote:
How many times do I have to tell you, there is no sump pump. There
was never any sump pump. It is to stop the sanitary storm sewer from
backing up when there is heavy rainfall and the storm sewer is
overloaded. If you don't know what a back-up preventer is find some
other poster to waste time on.

"Stormin Mormon" wrote in message
...

Good luck on that!

Back-Flow Preventer
 

On Jul 10, 9:02*am, "Ultraglide"
wrote:
How many times do I have to tell you, there is no sump pump. *There was
never any sump pump. It is to stop the sanitary storm sewer from backing up
when there is heavy rainfall and the storm sewer is overloaded. *If you
don't know what a back-up preventer is find some other poster to waste time
on.

"Stormin Mormon" wrote in message

...



No where did you say anything about a sanitary drain.

Anyhow, back to sump pumps. The backflow preventer is typically right
at the discharge line. It's in the sump crock, so it's not a big issue
if it leaks a bit.

--
Christopher A. Young
Learn more about Jesus
*www.lds.org
.

"Ultraglide" wrote in message
...
Nowhere did I say anything about sump pumps. This is simply a back
flow
preventer with a check valve. The valve is installed in the sanitary
drain
about a foot and a half below the floor in the basement. There is a
box-shaped housing which goes over the top of the valve. There is an
inspection cover which can be unscrewed to check the operation of the
valve.

"Twayne" wrote in message
...
,
Ultraglide typed:
I had a back-flow preventer installed last fall.

On what?

*It works
fine but I have a question. *There is usually about 1 inch
of water inside the housing.

What housing?

*When I open up the inspection
cover, it drains away but more enters after a short while. My
question is
this: *Is this normal?

Depends on what it is, how it's assembled, and what the overall
system
structure is.

*If not what do I do
to resolve the problem.

You might start by putting together a clear, concise description of
your
problem and a clear, concise phrasing of what you need to know. I
suspect
it's a sump pump but that's a small part of what needs to be known.

-- How to Post to a newsgroup:
http://word.mvps.org/findhelp/whichnewgrp.htm

http://www.ehow.com/how_5681_post-ne...-internet.html

Sump Pumps 101:

http://home.howstuffworks.com/home-i.../sump-pump.htm

http://www.doityourself.com/stry/sumppumpswork

http://www.sump-pump-info.com/articles.html

HTH,

Twayne`- Hide quoted text -

- Show quoted text -

This is the first time you have stated what the "preventer" is for. I
have a "preventer" for my sump pump discharge, so you are at fault for
not stating clearly what kind of a "preventer" you have.

Back-Flow Preventer
 

"hr(bob) " wrote in message
...
On Jul 10, 9:02 am, "Ultraglide"
wrote:
How many times do I have to tell you, there is no sump pump. There was
never any sump pump. It is to stop the sanitary storm sewer from backing
up
when there is heavy rainfall and the storm sewer is overloaded. If you
don't know what a back-up preventer is find some other poster to waste
time
on.

"Stormin Mormon" wrote in message

...



No where did you say anything about a sanitary drain.

Anyhow, back to sump pumps. The backflow preventer is typically right
at the discharge line. It's in the sump crock, so it's not a big issue
if it leaks a bit.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
.

"Ultraglide" wrote in message
...
Nowhere did I say anything about sump pumps. This is simply a back
flow
preventer with a check valve. The valve is installed in the sanitary
drain
about a foot and a half below the floor in the basement. There is a
box-shaped housing which goes over the top of the valve. There is an
inspection cover which can be unscrewed to check the operation of the
valve.

"Twayne" wrote in message
...
,
Ultraglide typed:
I had a back-flow preventer installed last fall.

On what?

It works
fine but I have a question. There is usually about 1 inch
of water inside the housing.

What housing?

When I open up the inspection
cover, it drains away but more enters after a short while. My
question is
this: Is this normal?

Depends on what it is, how it's assembled, and what the overall
system
structure is.

If not what do I do
to resolve the problem.

You might start by putting together a clear, concise description of
your
problem and a clear, concise phrasing of what you need to know. I
suspect
it's a sump pump but that's a small part of what needs to be known.

-- How to Post to a newsgroup:
http://word.mvps.org/findhelp/whichnewgrp.htm

http://www.ehow.com/how_5681_post-ne...-internet.html

Sump Pumps 101:

http://home.howstuffworks.com/home-i.../sump-pump.htm

http://www.doityourself.com/stry/sumppumpswork

http://www.sump-pump-info.com/articles.html

HTH,

Twayne`- Hide quoted text -

- Show quoted text -

This is the first time you have stated what the "preventer" is for. I
have a "preventer" for my sump pump discharge, so you are at fault for
not stating clearly what kind of a "preventer" you have.
If you knew what it was, then no explanation would be necessary. If you
don't know what it was then you obviously have nothing to add to the thread.

Back-Flow Preventer
 

Actually, it shouldn't be an issue, since the backflow preventer is in
the sump pump crock. You could make the sump pump discharge pipe go up
like an inverted J trap, and that would help reduce backflow.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"hr(bob) " wrote in message
...
On Jul 10, 9:02 am, "Ultraglide"
wrote:
How many times do I have to tell you, there is no sump pump. There
was
never any sump pump. It is to stop the sanitary storm sewer from
backing up
when there is heavy rainfall and the storm sewer is overloaded. If
you
don't know what a back-up preventer is find some other poster to
waste time
on.

This is the first time you have stated what the "preventer" is for. I
have a "preventer" for my sump pump discharge, so you are at fault for
not stating clearly what kind of a "preventer" you have.