![]() |
Abusive padlock tests
|
Abusive padlock tests
On 7/7/2010 5:57 AM, HeyBub wrote:
Overall winner: Master http://www.popularmechanics.com/tech...lick=pm_latest My locksmith friends use a circular saw with an abrasive metal cutting blade to remove padlocks. I often use my Dremel tool to do the same thing. Nothing is safe from battery operated cutting tools these days. TDD |
Abusive padlock tests
thing. Nothing is safe from battery operated cutting tools these days.
like my uncle says: Locks are only to keep honest people out. |
Abusive padlock tests
"HeyBub" wrote in message m... Overall winner: Master http://www.popularmechanics.com/tech...lick=pm_latest If the lock is hard to cut, just cut the part is looped through. I needed to get into a room at work that was locked with a padlock that bolt cutters would not cut. Shifted to the soft metal hasp and it took very little effort. |
Abusive padlock tests
HeyBub wrote:
Overall winner: Master http://www.popularmechanics.com/tech...lick=pm_latest I'm quite surprized. Master Lock the winner? And Medeco... their Best quality locks for the vending industry, (soda, candy machines), ... are stronger than any others I've ran across. But they do make a cheap version also. |
Abusive padlock tests
cln wrote:
thing. Nothing is safe from battery operated cutting tools these days. like my uncle says: Locks are only to keep honest people out. I say that and I'm not your Uncle... am I? |
Abusive padlock tests
On 2010-07-07, Tony wrote:
I'm quite surprized. Master Lock the winner? Master Lock has advertised heavily in PM for decades. My buddy and I shot an expensive Master Lock (non-plate type) with a ..44 mag. Couldn't even find the pieces. Besides, don't need to cut them. Too damn easy just to pick it. Try googling with pick master lock. nb |
Abusive padlock tests
On Jul 7, 10:37*am, wrote:
I have an 18 volt Ryobi rotary tool. With a metal cutoff wheel mounted I can open any padlock about as fast as if I had the key. I can open a typical padlock with a hammer faster than if I had the key, one-handed. Shackle usually pops right out. ----- - gpsman |
Abusive padlock tests
"HeyBub" wrote in message m... Overall winner: Master http://www.popularmechanics.com/tech...lick=pm_latest Why use a gun when this silent way will work? http://www.youtube.com/watch?v=z5trcVcik0A I have a set of lock picks. Yes, it is this easy. I carry slim jims, too. We have to access areas at times to do our real estate surveys. Pool pump rooms, storage areas, RV parking areas....... lots of places where people think locking it up is sufficient. We are an agent and assign of the management company, so legally have permission and access to anything on the property. I regularly amaze maintenance personnel and managers. Saves a lot of time for not having to go get keys, or wait days until some ditzy employee can come and open up for you. I have even opened cars a couple of times for people. I was the best at the Hilton Hotel in Vegas when I parked cars there. Always had people locking themselves out. Made good tips, too when we told them a locksmith would be $100, and usually 4 hours out. Locks are very easy to defeat, and the newest thing of bumping locks takes two seconds. Steve visit my blog at http://cabgbypasssurgery.com watch for the book |
Abusive padlock tests
"cln" wrote in message ... thing. Nothing is safe from battery operated cutting tools these days. like my uncle says: Locks are only to keep honest people out. I can pick a padlock in less than a minute. I also have a pair of bolt cutters that stand 3'6" high. Got them at a police auction. I prefer to carry the pick locks, rather than the bolt cutters. ;-) Steve visit my blog at http://cabgbypasssurgery.com watch for the book |
Abusive padlock tests
On Jul 7, 2:52*pm, "Steve B" wrote:
We are an agent and assign of the management company, so legally have permission and access to anything on the property. Have you checked your local laws? Here in Florida, regardless of permission or even if you're opening your own house, possession of lock picks is illegal unless you're actually a locksmith... (I don't remember the exact language, but it's pretty restrictive.) |
Abusive padlock tests
On Wed, 7 Jul 2010 21:08:36 -0700 (PDT), Larry Fishel
wrote: On Jul 7, 2:52*pm, "Steve B" wrote: We are an agent and assign of the management company, so legally have permission and access to anything on the property. Have you checked your local laws? Here in Florida, regardless of permission or even if you're opening your own house, possession of lock picks is illegal unless you're actually a locksmith... (I don't remember the exact language, but it's pretty restrictive.) It is called 'possession of burglar's tools' in New York. Here's the wording for FL [all other state on this page; http://www.lockpickguide.com/legalityoflockpicks.html ] "Section 810.06 - Possession of burglary tools. Whoever has in his or her possession any tool, machine, or implement with intent to use the same, or allow the same to be used, to commit any burglary or trespass shall be guilty of a felony of the third degree, punishable as provided in s. 775.082, s. 775.083, or s. 775.084. " Jim |
Abusive padlock tests
On Thu, 08 Jul 2010 06:29:38 -0400, Jim Elbrecht
wrote: On Wed, 7 Jul 2010 21:08:36 -0700 (PDT), Larry Fishel wrote: On Jul 7, 2:52*pm, "Steve B" wrote: We are an agent and assign of the management company, so legally have permission and access to anything on the property. Have you checked your local laws? Here in Florida, regardless of permission or even if you're opening your own house, possession of lock picks is illegal unless you're actually a locksmith... (I don't remember the exact language, but it's pretty restrictive.) It is called 'possession of burglar's tools' in New York. Here's the wording for FL [all other state on this page; http://www.lockpickguide.com/legalityoflockpicks.html ] "Section 810.06 - Possession of burglary tools. Whoever has in his or her possession any tool, machine, or implement with intent to use the same, or allow the same to be used, to commit any burglary or trespass shall be guilty of a felony of the third degree, punishable as provided in s. 775.082, s. 775.083, or s. 775.084. " And as I read both of them- you're OK if you have permission to enter the property. [and I think Steve is in UT where there are *no* codes.] Jim |
Abusive padlock tests
"Larry Fishel" wrote in message ... On Jul 7, 2:52 pm, "Steve B" wrote: We are an agent and assign of the management company, so legally have permission and access to anything on the property. Have you checked your local laws? Here in Florida, regardless of permission or even if you're opening your own house, possession of lock picks is illegal unless you're actually a locksmith... (I don't remember the exact language, but it's pretty restrictive.) reply: I only stated that we had legal permission of the owners and management companies to open locked areas, and that would include using bolt cutters or a prybar. Yes, they are illegal to possess. I have LEO experience, and family on the force there. I also have a license plate ring that identifies me subtly as a family member of the force there. I have my old ID. The picklocks are always hidden, and for any officer to be able to find them, they would have to be on a search for something else to toss the entire car. I am a well behaved citizen and that isn't going to happen. I fail to see that if you are on your own property that there can be a problem about opening a door. But then The Republik of Kalifornia has strange laws, and perhaps Florida does too. Steve visit my blog at http://cabgbypasssurgery.com watch for the book |
Abusive padlock tests
"Jim Elbrecht" wrote in message ... On Wed, 7 Jul 2010 21:08:36 -0700 (PDT), Larry Fishel wrote: On Jul 7, 2:52 pm, "Steve B" wrote: We are an agent and assign of the management company, so legally have permission and access to anything on the property. Have you checked your local laws? Here in Florida, regardless of permission or even if you're opening your own house, possession of lock picks is illegal unless you're actually a locksmith... (I don't remember the exact language, but it's pretty restrictive.) It is called 'possession of burglar's tools' in New York. Here's the wording for FL [all other state on this page; http://www.lockpickguide.com/legalityoflockpicks.html ] "Section 810.06 - Possession of burglary tools. Whoever has in his or her possession any tool, machine, or implement with intent to use the same, or allow the same to be used, to commit any burglary or trespass shall be guilty of a felony of the third degree, punishable as provided in s. 775.082, s. 775.083, or s. 775.084. " Jim We are in full view of management, and there is no intent to commit burglary. We are simply gaining access at the direction and/or under the supervision of management. We are on property by order of the owners as a legal agent or assign, therefore there is no trespass. I'd be within the law, even in Florida. It would seem that by that writing, anyone could possess these tools if they had no intent. It's like the Vermont concealed carry law. No permit is necessary if the concealed firearm is carried with no intent to use it to commit a crime. Steve visit my blog at http://cabgbypasssurgery.com watch for the book |
Abusive padlock tests
"Jim Elbrecht" wrote in message ... On Thu, 08 Jul 2010 06:29:38 -0400, Jim Elbrecht wrote: On Wed, 7 Jul 2010 21:08:36 -0700 (PDT), Larry Fishel wrote: On Jul 7, 2:52 pm, "Steve B" wrote: We are an agent and assign of the management company, so legally have permission and access to anything on the property. Have you checked your local laws? Here in Florida, regardless of permission or even if you're opening your own house, possession of lock picks is illegal unless you're actually a locksmith... (I don't remember the exact language, but it's pretty restrictive.) It is called 'possession of burglar's tools' in New York. Here's the wording for FL [all other state on this page; http://www.lockpickguide.com/legalityoflockpicks.html ] "Section 810.06 - Possession of burglary tools. Whoever has in his or her possession any tool, machine, or implement with intent to use the same, or allow the same to be used, to commit any burglary or trespass shall be guilty of a felony of the third degree, punishable as provided in s. 775.082, s. 775.083, or s. 775.084. " And as I read both of them- you're OK if you have permission to enter the property. [and I think Steve is in UT where there are *no* codes.] Jim Almost all our work is done in Nevada. We have had a couple of jobs in Utah, and Arizona. Steve visit my blog at http://cabgbypasssurgery.com watch for the book |
Abusive padlock tests
"Steve B" wrote:
"Jim Elbrecht" wrote in message -snip- [and I think Steve is in UT where there are *no* codes.] Jim Almost all our work is done in Nevada. We have had a couple of jobs in Utah, and Arizona. Sorry 'bout that. I knew it was someplace that was too hot for humans.g Once you get south of the Mason/Dixon and west of the Mississippi, they all run together to me. Jim |
Abusive padlock tests
On Wed, 07 Jul 2010 11:51:33 -0700, gpsman wrote:
On Jul 7, 10:37Â*am, wrote: I have an 18 volt Ryobi rotary tool. With a metal cutoff wheel mounted I can open any padlock about as fast as if I had the key. I can open a typical padlock with a hammer faster than if I had the key, one-handed. Shackle usually pops right out. .... and bust a window and jump through even faster than that :-) It always surprises me that people put huge locks on timber structures; no matter how good the lock may be, it surely can't be that difficult to just demolish the surrounding wood to gain access? |
Abusive padlock tests
"Jim Elbrecht" wrote in message ... "Steve B" wrote: "Jim Elbrecht" wrote in message -snip- [and I think Steve is in UT where there are *no* codes.] Jim Almost all our work is done in Nevada. We have had a couple of jobs in Utah, and Arizona. Sorry 'bout that. I knew it was someplace that was too hot for humans.g Once you get south of the Mason/Dixon and west of the Mississippi, they all run together to me. Jim Frickin' hot in Vegas right now, and we have to go there this afternoon. But, hey, for around $80 an hour, I just suck it up. I also carry cotton welding caps that I douse in ice water, and cotton Hawaiian print shirts that I dunk in the pool. Stays wet for about an hour. A real shock to the system when you first put the shirt on. Like someone hitting you with a blast of ice water. Works pretty good, though. I have used the wet welder's hat for a long time. Steve visit my blog at http://cabgbypasssurgery.com watch for the book |
Abusive padlock tests
"Jules Richardson" wrote in message ... On Wed, 07 Jul 2010 11:51:33 -0700, gpsman wrote: On Jul 7, 10:37 am, wrote: I have an 18 volt Ryobi rotary tool. With a metal cutoff wheel mounted I can open any padlock about as fast as if I had the key. I can open a typical padlock with a hammer faster than if I had the key, one-handed. Shackle usually pops right out. ... and bust a window and jump through even faster than that :-) It always surprises me that people put huge locks on timber structures; no matter how good the lock may be, it surely can't be that difficult to just demolish the surrounding wood to gain access? Amateurs do that. Professionals use bump keys and pick locks. Quieter, and no severed arteries. Steve visit my blog at http://cabgbypasssurgery.com watch for the book |
Abusive padlock tests
|
All times are GMT +1. The time now is 03:08 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter