Sheet Rock in an Outbuilding?
On May 23, 10:59*am, "Robert Olin" wrote:
I was going to use osb in my well house/shop but it is up to $14.45 a sheet. I can put in sheet rock for less than 1/2. *Question: *Will sheet rock be ok in an unheated outbuilding? Thanks, -- Robert Olin Bob's Water & Septic LLC Given that environment you might find metal panels more suitable. They are getting some sales traction in the box stores, so check prices. Joe |
Sheet Rock in an Outbuilding?
On May 23, 10:59 am, "Robert Olin" wrote: I was going to use osb in my well house/shop but it is up to $14.45 a sheet. I can put in sheet rock for less than 1/2. Question: Will sheet rock be ok in an unheated outbuilding? That is what is in my garage with no problems. It is ground gypsum mostly. I put a coat of primer on it but never put a finish coat. Probably never will. Oh, I did not tape and mud it either. |
Sheet Rock in an Outbuilding?
Ed Pawlowski wrote:
On May 23, 10:59 am, "Robert Olin" wrote: I was going to use osb in my well house/shop but it is up to $14.45 a sheet. I can put in sheet rock for less than 1/2. Question: Will sheet rock be ok in an unheated outbuilding? That is what is in my garage with no problems. It is ground gypsum mostly. I put a coat of primer on it but never put a finish coat. Probably never will. Oh, I did not tape and mud it either. Usually not recommended due to temp/humidity swings and the resulting condensation. Even if it doesn't get wet to the touch, it can still soak up moisture. Unless your well house/shop has stable humidity, the rock will be prone to getting funky and soft after a year or three. The exception would be arid climates, where nothing rots. Like the other guy said, I'd recommend the stuff that they sell to line pole barns with, even in preference to OSB, which likes to get fuzzy if unfinished and damp, and sometimes has outgassing problems. Or even the plastic-coated OSB they sell to skin cheap sheds with. Gotta look at the long term, even if you have to put off the work awhile until you can save up. No point in saving money now, if it costs you time and money to rip it out and redo it in a few years. -- aem sends... |
Sheet Rock in an Outbuilding?
"aemeijers" wrote That is what is in my garage with no problems. It is ground gypsum mostly. I put a coat of primer on it but never put a finish coat. Probably never will. Oh, I did not tape and mud it either. Usually not recommended due to temp/humidity swings and the resulting condensation. Even if it doesn't get wet to the touch, it can still soak up moisture. Unless your well house/shop has stable humidity, the rock will be prone to getting funky and soft after a year or three. The exception would be arid climates, where nothing rots. Perhaps, but the climate in the detached garage is the same as my house except during heating season. YMMV |
Sheet Rock in an Outbuilding?
Ed Pawlowski wrote:
On May 23, 10:59 am, "Robert Olin" wrote: I was going to use osb in my well house/shop but it is up to $14.45 a sheet. I can put in sheet rock for less than 1/2. Question: Will sheet rock be ok in an unheated outbuilding? That is what is in my garage with no problems. It is ground gypsum mostly. I put a coat of primer on it but never put a finish coat. Probably never will. Oh, I did not tape and mud it either. I was thinking about sheet rock without spackling, I wonder if my insurance company would let it slide. Since I have fiberglass insulation which states it must be covered to prevent fire. |
Sheet Rock in an Outbuilding?
Tony wrote:
I was thinking about sheet rock without spackling, I wonder if my insurance company would let it slide. Since I have fiberglass insulation which states it must be covered to prevent fire. That's what sheetrock is for - to suppess fires. As it heats, it release a BUNCH of water. That said, what's this business about fiberglass being protected from fire? |
Sheet Rock in an Outbuilding?
HeyBub wrote:
.... That said, what's this business about fiberglass being protected from fire? Faced, undoubtedly; the facing isn't fire-safe. -- |
Sheet Rock in an Outbuilding?
HeyBub wrote:
Tony wrote: I was thinking about sheet rock without spackling, I wonder if my insurance company would let it slide. Since I have fiberglass insulation which states it must be covered to prevent fire. That's what sheetrock is for - to suppess fires. As it heats, it release a BUNCH of water. That said, what's this business about fiberglass being protected from fire? I forgot to mention the paper vapor barrier. It must be covered. I'm just wondering if they care if all the gaps are filled so fire can't easily get behind the sheetrock. |
All times are GMT +1. The time now is 09:32 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter