Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
In our city, we have large bins for garbage and recycling. The bins
have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. |
#2
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
Replace the plastic with rubber wheels.
|
#3
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
Do you have a hand truck with rubber-like or pneumatic tires?
|
#4
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On May 3, 11:34*am, Prof Wonmug wrote:
In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. You might be able to find similar rubber wheels in Harbor Freight or your local farm supply store. A little jury-rigging might be needed, but it's worth a shot. |
#5
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On Mon, 3 May 2010 10:05:47 -0700 (PDT), keith
wrote: On May 3, 11:34*am, Prof Wonmug wrote: In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. You might be able to find similar rubber wheels in Harbor Freight or your local farm supply store. A little jury-rigging might be needed, but it's worth a shot. The existing wheels are 10" diameter x 2" wide with a 22" x 5/8" axle. The wheels don't have any bushings or bearings. The axles just go through a 5/8" hole in the plastic in the wheel. I couldn't find anything at Harbor Freight, but I did find a few other sources. http://www.globalindustrial.com/ These guys have all kinds of replacement parts for carts of various types. They have whole kits including two wheels, 18" axle (too short for me), washers, and cotter pins. They have fully pneumatic, semi-pneumatic, and molded rubber. I don't need or want fully pneumatic. The semi-pneumatic looks good. I assume this means unpressurized with a thicker tire and smaller air space. The solid rubber only comes in 8" diameter. The semi-pneumatic kit is just $34: http://www.globalindustrial.com/p/ma...ruck-wheel-kit Curiously, individual tires are $22 each. http://www.globalindustrial.com/p/ma...ner-hand-truck http://www.amazon.com/10-Pneumatic-T...ef=pd_sbs_ol_5 This is a pair of 300 lb test fully pneumatic tires for $16. If they were semi-pneumatic, I would be sold. http://www.amazon.com/gp/product/B00...JZ6E417PV3GA78 This is a semi-pneumatic, but the bore is only 1/2". $11 for one. http://www.northerntool.com/ These guys also have lots of wheels, but I couldn't find any that looked to be the right size. They also tended to be more expensive. http://www.hamiltoncaster.com/Catalo...Id=W-10-SU-5/8 This looks to be a very nice tire. At $65, it should be. http://www.wheeleez.com/utilitywheels.php About the right size (10" x 2"), but none with 5/8 axle. Most have a 3/4" http://www.handtrucks.com/hand-truck...4294870594.cfm Cost $20-$50/wheel and I need 6. http://www.grainger.com/Grainger/wwg...N=0&sst=subset Up to $100/wheel. |
#6
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On 5/3/2010 12:34 PM, Prof Wonmug wrote:
In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. Wheels of the correct size and rubber tired are available from most of the can manufacturers. Check the can to see who the manufacturer is and then contact them for a dealer in your area. Most of the dealers will sell tires, axles etc to anyone as repair parts. Guess on price would be about $10 per wheel |
#7
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On Mon, 03 May 2010 13:38:16 -0400, rmorton
wrote: On 5/3/2010 12:34 PM, Prof Wonmug wrote: In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. Wheels of the correct size and rubber tired are available from most of the can manufacturers. Check the can to see who the manufacturer is and then contact them for a dealer in your area. Most of the dealers will sell tires, axles etc to anyone as repair parts. Guess on price would be about $10 per wheel The manufacturer is Toter (http://www.toter.com/). The person I talked to was arrogant and annoyed to have been bothered by a mere resident. She said that those are the "standard" wheels and seemed offended that anyone would even suggest replacing them. She even suggested that I might be breaking the law, since they are owned by the city. |
#8
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On 5/3/2010 3:58 PM, Prof Wonmug wrote:
On Mon, 03 May 2010 13:38:16 -0400, wrote: On 5/3/2010 12:34 PM, Prof Wonmug wrote: In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. Wheels of the correct size and rubber tired are available from most of the can manufacturers. Check the can to see who the manufacturer is and then contact them for a dealer in your area. Most of the dealers will sell tires, axles etc to anyone as repair parts. Guess on price would be about $10 per wheel The manufacturer is Toter (http://www.toter.com/). The person I talked to was arrogant and annoyed to have been bothered by a mere resident. She said that those are the "standard" wheels and seemed offended that anyone would even suggest replacing them. She even suggested that I might be breaking the law, since they are owned by the city. Yeah, Toter is that way. Check your yellow pages for Compacter repair/parts, Baler repair/parts or other such things. One of them will probably carry the toter line. Let your fingers do the walking . The city will probably never notice that you chamged the wheels. |
#9
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On Mon, 03 May 2010 21:35:47 -0400, rmorton
wrote: On 5/3/2010 3:58 PM, Prof Wonmug wrote: On Mon, 03 May 2010 13:38:16 -0400, wrote: On 5/3/2010 12:34 PM, Prof Wonmug wrote: In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. Wheels of the correct size and rubber tired are available from most of the can manufacturers. Check the can to see who the manufacturer is and then contact them for a dealer in your area. Most of the dealers will sell tires, axles etc to anyone as repair parts. Guess on price would be about $10 per wheel The manufacturer is Toter (http://www.toter.com/). The person I talked to was arrogant and annoyed to have been bothered by a mere resident. She said that those are the "standard" wheels and seemed offended that anyone would even suggest replacing them. She even suggested that I might be breaking the law, since they are owned by the city. Yeah, Toter is that way. Check your yellow pages for Compacter repair/parts, Baler repair/parts or other such things. One of them will probably carry the toter line. Let your fingers do the walking . The city will probably never notice that you chamged the wheels. I'm probably going to get these semi-pneumatic tires from Global at $34/pair and rated for 500 lbs. I think it will be ahrd to beat that price. http://tinyurl.com/37yubl7 |
#10
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
In article ,
Prof Wonmug wrote: On Mon, 03 May 2010 21:35:47 -0400, rmorton wrote: On 5/3/2010 3:58 PM, Prof Wonmug wrote: On Mon, 03 May 2010 13:38:16 -0400, wrote: On 5/3/2010 12:34 PM, Prof Wonmug wrote: In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. Wheels of the correct size and rubber tired are available from most of the can manufacturers. Check the can to see who the manufacturer is and then contact them for a dealer in your area. Most of the dealers will sell tires, axles etc to anyone as repair parts. Guess on price would be about $10 per wheel The manufacturer is Toter (http://www.toter.com/). The person I talked to was arrogant and annoyed to have been bothered by a mere resident. She said that those are the "standard" wheels and seemed offended that anyone would even suggest replacing them. She even suggested that I might be breaking the law, since they are owned by the city. Yeah, Toter is that way. Check your yellow pages for Compacter repair/parts, Baler repair/parts or other such things. One of them will probably carry the toter line. Let your fingers do the walking . The city will probably never notice that you chamged the wheels. I'm probably going to get these semi-pneumatic tires from Global at $34/pair and rated for 500 lbs. I think it will be ahrd to beat that price. http://tinyurl.com/37yubl7 Wouldn't it be funny (well, maybe not for you) if the garbage collectors swapped your cans with their $34 semi-pneumatic tires with someone else's cans with their regular noisy tires? m |
#11
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
Prof Wonmug wrote in news:43utt5dr41u9o5jru2s2oia610enqrlc04
@4ax.com: In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. You could try weatherstripping. It comes in rolls, in various widths, thicknesses and hardnesses. And it's self-adhesive on one side. Home Depot or Lowes will have it. It might be a bit soft and not too durable, but it's worth a shot. -- Tegger |
#12
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
Man!!! I wish I had problems in life like Professor whatever, and
had to worry about the noise my trash can made once or twice a week. Get something real to woryy about. Bob-tx "Prof Wonmug" wrote in message ... In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. |
#13
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
"Bob-tx" wrote:
Man!!! I wish I had problems in life like Professor whatever, and had to worry about the noise my trash can made once or twice a week. Get something real to woryy about. Bob-tx Hey- I'm *glad* I've got a neighbor who is a considerate as the Prof. If I was him I'd cut two rubber bands out of an inner tube and snap them on the wheels. Jim |
#14
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On Mon, 03 May 2010 15:35:37 -0400, Jim Elbrecht
wrote: "Bob-tx" wrote: Man!!! I wish I had problems in life like Professor whatever, and had to worry about the noise my trash can made once or twice a week. Get something real to woryy about. Bob-tx Hey- I'm *glad* I've got a neighbor who is a considerate as the Prof. Thanks. It is partly for the benefit of the neighbors, but mainly for my wife. I usually take them out about 6am when I get up. she is still sleeping and the bedroom window is right above the driveway. I've taken to taking them out the night before since the new driveway. If I was him I'd cut two rubber bands out of an inner tube and snap them on the wheels. First, I'd need to find a 10" inner tube, then a way to keep it in place. Maybe an 8" tube, so I'd really have to snap it in place. |
#15
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
"Prof Wonmug" wrote in message ... On Mon, 03 May 2010 15:35:37 -0400, Jim Elbrecht wrote: "Bob-tx" wrote: Man!!! I wish I had problems in life like Professor whatever, and had to worry about the noise my trash can made once or twice a week. Get something real to woryy about. Bob-tx Hey- I'm *glad* I've got a neighbor who is a considerate as the Prof. Thanks. It is partly for the benefit of the neighbors, but mainly for my wife. I usually take them out about 6am when I get up. she is still sleeping and the bedroom window is right above the driveway. I've taken to taking them out the night before since the new driveway. If I was him I'd cut two rubber bands out of an inner tube and snap them on the wheels. First, I'd need to find a 10" inner tube, then a way to keep it in place. Maybe an 8" tube, so I'd really have to snap it in place. Go to a tire dealer that sells big truck tires. See if they have some take off inner tubes (damaged ones) Find one slightly smaller than what you need. Cut for width. Use contact cement on wheels. Stretch cut tube to go on wheel. I did this when our children were small and we had oak floors. Really works. Still have some of those toys and grand kids have used them. These were home made riding toys with wood wheels. WW |
#16
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
Prof Wonmug wrote:
On Mon, 03 May 2010 15:35:37 -0400, Jim Elbrecht wrote: "Bob-tx" wrote: Man!!! I wish I had problems in life like Professor whatever, and had to worry about the noise my trash can made once or twice a week. Get something real to woryy about. Bob-tx Hey- I'm *glad* I've got a neighbor who is a considerate as the Prof. Thanks. It is partly for the benefit of the neighbors, but mainly for my wife. I usually take them out about 6am when I get up. she is still sleeping and the bedroom window is right above the driveway. I've taken to taking them out the night before since the new driveway. If I was him I'd cut two rubber bands out of an inner tube and snap them on the wheels. First, I'd need to find a 10" inner tube, then a way to keep it in place. Maybe an 8" tube, so I'd really have to snap it in place. I think you are looking at this wrong. A tube from a car tire might work, maybe a little smaller. Don't use the whole diameter of the tube. Lay it flat like an "O" and cut it from the inside to the outside, you could cut 30 or so rubber bands from one tube. And the local tire store probably has a few old tubes free of charge. |
#17
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On Mon, 03 May 2010 16:40:27 -0400, Tony
wrote: Prof Wonmug wrote: On Mon, 03 May 2010 15:35:37 -0400, Jim Elbrecht wrote: "Bob-tx" wrote: Man!!! I wish I had problems in life like Professor whatever, and had to worry about the noise my trash can made once or twice a week. Get something real to woryy about. Bob-tx Hey- I'm *glad* I've got a neighbor who is a considerate as the Prof. Thanks. It is partly for the benefit of the neighbors, but mainly for my wife. I usually take them out about 6am when I get up. she is still sleeping and the bedroom window is right above the driveway. I've taken to taking them out the night before since the new driveway. If I was him I'd cut two rubber bands out of an inner tube and snap them on the wheels. First, I'd need to find a 10" inner tube, then a way to keep it in place. Maybe an 8" tube, so I'd really have to snap it in place. I think you are looking at this wrong. A tube from a car tire might work, maybe a little smaller. Don't use the whole diameter of the tube. Lay it flat like an "O" and cut it from the inside to the outside, you could cut 30 or so rubber bands from one tube. And the local tire store probably has a few old tubes free of charge. Aha! Use the cross section -- not the diamater. Duh. I probably never would have thought of that. Thanks. |
#18
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On Mon, 03 May 2010 13:07:15 -0700, Prof Wonmug wrote:
If I was him I'd cut two rubber bands out of an inner tube and snap them on the wheels. First, I'd need to find a 10" inner tube, then a way to keep it in place. Maybe an 8" tube, so I'd really have to snap it in place. Then Duct Tape, oh maybe two ply. |
#19
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
Jim Elbrecht wrote:
"Bob-tx" wrote: Man!!! I wish I had problems in life like Professor whatever, and had to worry about the noise my trash can made once or twice a week. Get something real to woryy about. Bob-tx Hey- I'm *glad* I've got a neighbor who is a considerate as the Prof. If I was him I'd cut two rubber bands out of an inner tube and snap them on the wheels. Jim The inner tube rubber band fix was my first thought also. |
#20
|
|||
|
|||
Quote:
https://www.amazon.com/NK-Rubber-Tub...s=rubebr+tyres |
#21
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
That said, I bet this is a good application for a piece of an old
leather belt. nate On 05/04/2010 03:35 AM, Bob-tx wrote: Man!!! I wish I had problems in life like Professor whatever, and had to worry about the noise my trash can made once or twice a week. Get something real to woryy about. Bob-tx "Prof wrote in message ... In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. -- replace "roosters" with "cox" to reply. http://members.cox.net/njnagel |
#22
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
What's wrong with improving your quality of life by reducing the racket those cheap plastic wheels make? What are you doing here anyway?
|
#23
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On May 3, 12:34*pm, Prof Wonmug wrote:
In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. Duct Tape Joe G |
#24
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On Mon, 3 May 2010 11:42:11 -0700 (PDT), GROVER
wrote: On May 3, 12:34*pm, Prof Wonmug wrote: In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. Duct Tape (heh). I thought of that (first thought, actually), but I wonder if (a) it would provide very much cushioning or noise damping without several layers and (b) how long it would last. |
#25
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On Mon, 3 May 2010 11:42:11 -0700 (PDT), GROVER
wrote: Duct Tape Joe G + 1 Even use matching colors .. |
#26
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
Prof Wonmug wrote:
In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. You might find some rubber wheels at Harbor Freight that will fit it. I can imagine the sound it makes because back in the late 1980's I had a little 3 year old buddy next door who's parents gave him soft drinks containing a lot of sugar and caffeine. At five in the morning he would be on his Big Wheel zipping up and down the sidewalk outside my window. It sounded like a concrete mixer. TDD |
#27
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On May 3, 3:15*pm, The Daring Dufas
wrote: Prof Wonmug wrote: In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. You might find some rubber wheels at Harbor Freight that will fit it. I can imagine the sound it makes because back in the late 1980's I had a little 3 year old buddy next door who's parents gave him soft drinks containing a lot of sugar and caffeine. At five in the morning he would be on his Big Wheel zipping up and down the sidewalk outside my window. It sounded like a concrete mixer. TDD- Hide quoted text - - Show quoted text - 3 YO and Hot Wheels I'd like to know who signed off on using pavers/tile in supermarkets, especially with the huge grout lines. Don't you think they'd want a flat surface so that customers have a nice relaxing experience and might want to hang out longer? I can't wait to get out any areas with pavers (typically the produce department and sometimes the bakery) to get away from the clunk clunk clunk of the shopping cart wheels. If they think that they make people slow down in those departments, it doesn't work for me. |
#28
Posted to alt.home.repair
|
|||
|
|||
Best material to floor the grocery
Wear ear plugs, and walk up and down for an hour or so?
-- Christopher A. Young Learn more about Jesus www.lds.org .. "DerbyDad03" wrote in message ... I'd like to know who signed off on using pavers/tile in supermarkets, especially with the huge grout lines. Don't you think they'd want a flat surface so that customers have a nice relaxing experience and might want to hang out longer? I can't wait to get out any areas with pavers (typically the produce department and sometimes the bakery) to get away from the clunk clunk clunk of the shopping cart wheels. If they think that they make people slow down in those departments, it doesn't work for me. |
#29
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On May 3, 12:34*pm, Prof Wonmug wrote:
In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. So you can't live with it for the 30 seconds, ONCE A WEEK, it takes to drag the bin from the house to the curb, and back again? Is this the most pressing problem you have in your life? |
#30
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
|
#31
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
Prof Wonmug wrote:
On Mon, 3 May 2010 12:35:21 -0700 (PDT), wrote: On May 3, 12:34 pm, Prof Wonmug wrote: In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. So you can't live with it for the 30 seconds, ONCE A WEEK, it takes to drag the bin from the house to the curb, and back again? Is this the most pressing problem you have in your life? Well, it was. But now it's trying to tolerate jerks. A nice big LOL! |
#32
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On May 3, 10:34*am, Prof Wonmug wrote:
In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. == Just "pop-rivet" the chosen material to the wheels. Should work like a charm. == |
#33
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
Ear plugs! On May 3, 12:34*pm, Prof Wonmug wrote: In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. |
#34
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
"beecrofter" wrote in message ... On May 3, 12:34 pm, Prof Wonmug wrote: In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. Put the trash out the night before, when you get home from work. |
#35
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
Prof Wonmug wrote:
In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. I'd try cutting chunks out of a used mountain bike tire. Wrap them around the wheel, cut them a fraction short, then stich them on using baling wire, probably on the sides where the wire won't wear. Twist the wire tight to make them snug. The tire bead may be the strongest place to wire them. |
#36
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On Mon, 03 May 2010 09:34:52 -0700, Prof Wonmug wrote:
In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. I finally got around to this project. I thought I'd post the results, in case anyone cares... I could not find an inner tube with the right diameter. I bought one from a local auto parts store, but it was way too small. I am not strong enough to stretch it over the wheels. Next, I went to the local hardware store looking for padded tape, weather stripping, rubber strips, etc. I ended up buying a roll of runner garage door sealer and a roll of Gorilla tape. The garage door sealer is what gets nailed to the bottom of garage doors to form a seal. The Gorilla tape is fairly thick, so I first tried wrapping the wheels with just that. One wrapping cut the noise by 30-40%. Not bad. I put on 2 more wraps (3 total), which reduced the noise by about 50-60%. Not quiet, but much better. And this was with an empty bin. They are much quieter when full. The heavier they are the quieter they roll. One the second bin, I cut a length of the garage door sealer and taped it to the wheels with the Gorilla tape. This was at least as effective as the Gorilla tape alone. But the rubber strip was too wide (almost 3"), so I took it off, cut it down to about 1.5" and retaped it. One the last bin, I applied the rubber sealer and an extra wrap or Gorilla tape. This combination cuts the noise by about 60-70%. After playing with it a bit, I realized that the noise is not just from the wheels bouncing along on the pavers. There is a lot of noise from the axle and bearings. So even if I had low pressure air tires, there would still be some noise. Anyway, this solution is fairly cheap and reasonably quick and it does a passable job. Thanks for all of the suggestions. |
#37
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
replying to Prof Wonmug, tapbeer wrote:
You certainly gave this problem a lot of attention! I like the idea of wrapping it in rubber sealer but concerned that the tape might come loose in a few months especially after several rains. Thanks for sharing your solutions though! -- for full context, visit http://www.homeownershub.com/mainten...ls-440104-.htm |
#38
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
|
#39
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
On Monday, May 3, 2010 at 9:34:52 AM UTC-7, Prof Wonmug wrote:
In our city, we have large bins for garbage and recycling. The bins have hard plastic wheels. We recently replaced our asphalt driveway with pavers. The pavers have a much rougher surface than the asphalt. Now, when I walk the bins out to the curb, the hard plastic wheels make a horrible racket. I would like to wrap the wheels with a strip of rubber or something to muffle the noise. I am planning to go to the local hardware store and look for a suitable material, but thought I would first ask if anyone has done this beforfe or has any suggestions for, a. The right material to use, and b. The best way to attach it to the wheels. There is about an inch of clearance in the wheel housing. http://roll-tech.net/snap-on6x1-34wheels.aspx |
#40
Posted to alt.home.repair
|
|||
|
|||
Best material to cover garbage bin wheels
How about these: https://www.aliexpress.com/wholesale...by+wheel+cover
|
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Material for external swing seat cover | UK diy | |||
Reattach wheels and axle to a plastic garbage container? | Home Ownership | |||
material for ceiling access cover plate? | UK diy | |||
material similar to plastic chair mats to cover all carpet in my apartment | Home Repair | |||
Cover material for ceiling insulation | Home Ownership |