DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   which floor finish is better? (https://www.diybanter.com/home-repair/298243-floor-finish-better.html)

Sam Takoy February 15th 10 10:44 PM

which floor finish is better?
 
Hi,

I got two comparable quotes for floors in my house. My house is a 70
year old colonial with antique red oak floors.

There is one big difference. One company uses

1 coat of Emulsion followed by 3 coats of StreetShoe (by basic coatings)
http://www.basiccoatings.com/SearchC...?ProdDispGrp=3

the other company uses

2 coats of Absco Polyurethane
Ahttp://www.harvesterfloors.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=harvester&Produ ct_Code=LL5ASAT


I hear that oil is better, but the other guy uses 4 coats.

Thank you so much in advance!

Sam


ransley February 16th 10 03:36 AM

which floor finish is better?
 
On Feb 15, 4:44*pm, Sam Takoy wrote:
Hi,

I got two comparable quotes for floors in my house. My house is a 70
year old colonial with antique red oak floors.

There is one big difference. One company uses

1 coat of Emulsion followed by 3 coats of StreetShoe (by basic coatings)http://www.basiccoatings.com/SearchC...temDetail.aspx...

the other company uses

2 coats of Absco Polyurethane
Ahttp://www.harvesterfloors.com/Merchant2/merchant.mv?Screen=PROD&Stor....

I hear that oil is better, but the other guy uses 4 coats.

Thank you so much in advance!

Sam


4 coats is better 2 just isnt enough since the first coat sinks in,
even the second coat doesnt lay on top fully. Oil Poly yellows , water
base doesnt, who says oil is better, ive seen 2 coat jobs and they
look bad and wont last but a few years.

HeyBub[_3_] August 24th 10 02:09 PM

which floor finish is better?
 
carolyny476 wrote:
responding to
http://www.homeownershub.com/mainten...er-425355-.htm
carolyny476 wrote:

Sam Takoy wrote:




Hi,


I got two comparable quotes for floors in my house. My house is a 70
year old colonial with antique red oak floors.


There is one big difference. One company uses


1 coat of Emulsion followed by 3 coats of StreetShoe (by basic
coatings)

http://www.basiccoatings.com/SearchC...?ProdDispGrp=3

the other company uses


2 coats of Absco Polyurethane

Ahttp://www.harvesterfloors.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=harvester&Produ ct_Code=LL5ASAT


I hear that oil is better, but the other guy uses 4 coats.


Thank you so much in advance!


Sam


Thanks you for the post.


So tell the second guy to put on four coats.




All times are GMT +1. The time now is 06:47 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter