Vinyl siding question from rookie
 

Most of my house is the cheap frame siding with several rotten-out
boards. Does vinyl siding go over top of the frame siding or is the
old frame removed? Thanks

Vinyl siding question from rookie
 

On Jan 11, 2:14�am, LRESA wrote:
Most of my house is the cheap frame siding with several rotten-out
boards. Does vinyl siding go over top of the frame siding or is the
old frame removed? Thanks

I am not sure what you mean by "cheap frame siding". But, if it
"lapped siding" you will have to either replace it with OSB or put
furring stripes over it. If you don't, the siding will not fit/look
right. If you are talking about T-111, you can side right over it.
Just make sure the T-111 is attached firmly and won't bow out from
warping.

Hank

Vinyl siding question from rookie
 

"LRESA" wrote

| Most of my house is the cheap frame siding with several rotten-out
| boards. Does vinyl siding go over top of the frame siding or is the
| old frame removed? Thanks

You should remove the rotten boards and replace them with OSB. Otherwise the
rot will keep spreading.

Vinyl siding question from rookie
 

On Sun, 10 Jan 2010 23:14:25 -0800 (PST), LRESA wrote:

Most of my house is the cheap frame siding with several rotten-out
boards. Does vinyl siding go over top of the frame siding or is the
old frame removed? Thanks

I'm guessing you have some kind of old wood siding that has
deteriorated over the years.

If the rotting is not too horribly far advanced, it's likely
practical to use it to fasten new vinyl siding. This has been done
with literally zillions of structures.

You need to have a good idea of what a contractor would need to do ...

Identify the old siding on the structure, assess the degree of
rotting, then get a how-to booklet or 2 from Home Depot or Lowes etc
and read it. The way vinyl siding is "hung" is fairly intuitive: you
should be able to grasp it fairly easily.

P

"Law Without Equity Is No Law At All. It Is A Form Of Jungle Rule."