OT - Dodge Acronym
 

Ford: Fix or Repair Daily / Found on Road Dead
GMC: Got Mechanic Coming.

Is there one for Dodge?

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..

OT - Dodge Acronym
 

Stormin Mormon wrote:
Ford: Fix or Repair Daily / Found on Road Dead
GMC: Got Mechanic Coming.

Is there one for Dodge?

Hmmm,
Old story. If you can't dodge, ram it.

OT - Dodge Acronym
 

"Tony Hwang" wrote in message
...
Stormin Mormon wrote:
Ford: Fix or Repair Daily / Found on Road Dead
GMC: Got Mechanic Coming.

Is there one for Dodge?

Hmmm,
Old story. If you can't dodge, ram it.

My neighbor's truck has a big sign on it that says RAM. I did and boy, was
he ****ed.

OT - Dodge Acronym
 

Stormin Mormon wrote:
Ford: Fix or Repair Daily / Found on Road Dead
GMC: Got Mechanic Coming.

Is there one for Dodge?

Dear Old Dads Garage Experiment


--
PV

Stupidity is a condition
Ignorance is a choice

OT - Dodge Acronym
 

In article , "Stormin Mormon" wrote:
Ford: Fix or Repair Daily / Found on Road Dead
GMC: Got Mechanic Coming.

FIAT: Fix it again, Tony. Fix it again today. Fix it again tomorrow.

Is there one for Dodge?

Damned Old Dodge Goes Everywhere.

OT - Dodge Acronym
 

On Mon, 02 Nov 2009 22:44:24 -0500, Ed Pawlowski wrote:
Old story. If you can't dodge, ram it.

My neighbor's truck has a big sign on it that says RAM.

I never quite worked out why you'd name a truck after a sheep, anyway.

OT - Dodge Acronym
 

On Nov 3, 8:43*am, Jules
wrote:
On Mon, 02 Nov 2009 22:44:24 -0500, Ed Pawlowski wrote:
Old story. If you can't dodge, ram it.

My neighbor's truck has a big sign on it that says RAM.

I never quite worked out why you'd name a truck after a sheep, anyway.

Having raised sheep for many years, I can attest to the strength and
toughness of a ram. However, the derivation seems to be a bit more
convoluted than that. From http://main.ramchargers.com/

"In 1959 a group of engineers from Chrysler Corporation began to
participate in the nation's new craze; "Drag racing". They started
with a 1949 Plymouth business coupe, named "The High and Mighty". They
had extensive experience with the "long-horn" intake manifold that
powered the early Chrysler 300 series, and began to experiment with
the technology in drag racing. The name soon evolved from long-horn to
ram's -horn and eventually the public settled on the nickname Ram-
Induction. By the 1960 race season this group created the team named,
RAMCHARGERS."

Paul

OT - Dodge Acronym
 

In article , Thomas wrote:
PONTIAC:

Poor old n****r thinks it's a Cadillac

Sorry, but I had to.

No, you didn't.

plonk

OT - Dodge Acronym
 

Tony Hwang wrote:
Stormin Mormon wrote:
Ford: Fix or Repair Daily / Found on Road Dead
GMC: Got Mechanic Coming.

Is there one for Dodge?

Hmmm,
Old story. If you can't dodge, ram it.
FIAT - Fix it again, Tony

--

OT - Dodge Acronym
 

On Mon, 2 Nov 2009 22:17:31 -0500, "Stormin Mormon"
wrote:

Ford: Fix or Repair Daily / Found on Road Dead

First On Race Day

GMC: Got Mechanic Coming.

Is there one for Dodge?

"Thelma"?

OT - Dodge Acronym
 

On Nov 2, 10:17*pm, "Stormin Mormon"
wrote:
Ford: Fix or Repair Daily / Found on Road Dead
GMC: Got Mechanic Coming.

Is there one for Dodge?

--
Christopher A. Young
Learn more about Jesus
*www.lds.org
.

Drive Only During Great Emergencies
Dead On Day Guarantee Expires
Drips Oil Drops Grease Everywhere
Dang Old Dirty Gas Eater
Don't Over Drive Gutless Engine

Some of my previously owned vehicles:

- 1969 Dodge Coronet
- 1972 Dodge Dart
- 1996 Dodge Ram 3/4 Ton Conversion Van

Should I mention the two 1980 Plymouth Voyagers during a Dodge
discussion? Actually, I probably shouldn't mention them at all!

OT - Dodge Acronym
 

On Tue, 03 Nov 2009 06:38:42 -0800, Pavel314 wrote:
"In 1959 a group of engineers from Chrysler Corporation began to
participate in the nation's new craze; "Drag racing". They started
with a 1949 Plymouth business coupe, named "The High and Mighty". They
had extensive experience with the "long-horn" intake manifold that
powered the early Chrysler 300 series, and began to experiment with
the technology in drag racing. The name soon evolved from long-horn to
ram's -horn and eventually the public settled on the nickname Ram-
Induction. By the 1960 race season this group created the team named,
RAMCHARGERS."

Obviously my reply was tongue-in-cheek, but that's interesting... I'd
always been under the assumption that the 'ram' terminology came from some
sort of supercharging/racing pedigree, and some marketing department had
decided to slap it onto the trucks. Interesting that the name came from
the intake shape instead...

Having successfully learnt something new today, I think I'll go take a nap ;)

cheers

Jules

OT - Dodge Acronym
 

Jules wrote:
On Mon, 02 Nov 2009 22:44:24 -0500, Ed Pawlowski wrote:
Old story. If you can't dodge, ram it.
My neighbor's truck has a big sign on it that says RAM.

I never quite worked out why you'd name a truck after a sheep, anyway.



The name is to appeal to people that use them as cars, not trucks.
Makes them feel bigger. The Ram name harkens to what they would do with
what they are compensating for the lack of.

I'd love to own a pickup, even a light duty one. Half a dozen times a
year, it would come in real handy. But no extra parking spots, and
little extra cash, make a third vehicle an impractical indulgence for
me. And I certainly don't want to feed a full-size one for a daily
driver, or deal with a monster like that in city commuting traffic. (Not
to mention a full-size would not fit in my short 2-car garage- I even
had to get a short wheelbase minivan.)

Does anyone make a small pickup any more? Like the rangers or toyotas
from 10-15 years ago? All the stuff on the lots now looks huge, not to
mention looking like a Tonka toy. Big meaningless chrome phallic noses,
pointless huge tires, etc. Does anyone make a truck that looks like a
truck anymore? I'm a form follows function sort of person- I don't need
rolling bling.

--
aem sends...

OT - Dodge Acronym
 

I recall seeing a list that one for nearly every make but offhand, the
only one that I can remember beside the ones already mentioned is HONDA
Had One Never Did Again

OT - Dodge Acronym
 

aemeijers wrote:

Does anyone make a small pickup any more? Like the rangers or toyotas
from 10-15 years ago? All the stuff on the lots now looks huge, not to
mention looking like a Tonka toy. Big meaningless chrome phallic noses,
pointless huge tires, etc. Does anyone make a truck that looks like a
truck anymore? I'm a form follows function sort of person- I don't need
rolling bling.

I hear that. It seems that even the full size trucks get bigger and
bigger. I've got a 93 F-150 and I feel like the bed sides are really
tall - taller than my dad's '73 Chevy and WAY taller than some old
Studebakers I've worked on. But parked next to a NEW F-150 mine appears
comparatively easy to load.

Why is it that both the bed floor and the top of the bed sides seems to
creep up every revision of a truck chassis? Wouldn't a LOW bed floor be
a selling feature? Some of these new trucks ought to come with a
folding stepstool shoved behind the seat.

nate

--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel

OT - Dodge Acronym
 

On Tue, 03 Nov 2009 14:22:05 -0600, Jules
wrote:

On Tue, 03 Nov 2009 06:38:42 -0800, Pavel314 wrote:
"In 1959 a group of engineers from Chrysler Corporation began to
participate in the nation's new craze; "Drag racing". They started
with a 1949 Plymouth business coupe, named "The High and Mighty". They
had extensive experience with the "long-horn" intake manifold that
powered the early Chrysler 300 series, and began to experiment with
the technology in drag racing. The name soon evolved from long-horn to
ram's -horn and eventually the public settled on the nickname Ram-
Induction. By the 1960 race season this group created the team named,
RAMCHARGERS."

Obviously my reply was tongue-in-cheek, but that's interesting... I'd
always been under the assumption that the 'ram' terminology came from some
sort of supercharging/racing pedigree, and some marketing department had
decided to slap it onto the trucks. Interesting that the name came from
the intake shape instead...

Having successfully learnt something new today, I think I'll go take a nap ;)

cheers

Jules
Interestingly, those "rams horn" manifolds DID have a "Ram tuning"
effect.

However, the explanation given for the "ram" being because of the
ram'a horn manifold design doesn't hold water - as the "RAM TOUGH"
motto and the rams-horns hood ornament were used before the second
world war. It was a prominent feature on the 1933 dodge car as well.
I believe the "ram" was on dadge cars virtually from their beginning
as a Chrysler product (after the "Star of David" emblem of the "Dodge
Brothers" dissapeared)

OT - Dodge Acronym
 

Nate Nagel wrote:
aemeijers wrote:

Does anyone make a small pickup any more? Like the rangers or toyotas
from 10-15 years ago? All the stuff on the lots now looks huge, not to
mention looking like a Tonka toy. Big meaningless chrome phallic
noses, pointless huge tires, etc. Does anyone make a truck that looks
like a truck anymore? I'm a form follows function sort of person- I
don't need rolling bling.

I hear that. It seems that even the full size trucks get bigger and
bigger. I've got a 93 F-150 and I feel like the bed sides are really
tall - taller than my dad's '73 Chevy and WAY taller than some old
Studebakers I've worked on. But parked next to a NEW F-150 mine appears
comparatively easy to load.

Why is it that both the bed floor and the top of the bed sides seems to
creep up every revision of a truck chassis? Wouldn't a LOW bed floor be
a selling feature? Some of these new trucks ought to come with a
folding stepstool shoved behind the seat.

nate

I think a saw a couple brands advertising fold-out bed and bumper steps
a couple years ago. I think they have super-sized the apparent visual
dimensions, and raised the bed and sidewall heights, to make them look
Big and Tough, and in proportion with the giant tires. (Pretty useless
for the 2/3 of trucks that never leave the pavement. And guess what, 4x4
guys? In snow, tall and skinny works better.)

When Ford split off their heavy pickup line about 10-12 years back, they
suddenly had a lot of complaints from gooseneck and 5th wheel owners
(one of the few groups that really need big trucks). The steep rake and
high bedsides meant the old hitches were not tall enough, and if they
raised the hitch up so bed sides and trailer didn't hit in bumpy roads,
the tow geometry was all wrong. Guys that pull goosenecks for a living
were having to buy chassis-cabs and get purpose-built diamond-plate
utility beds put on.

As a kid, I had a couple of mid-70s Ford F150s as company trucks. They
drove about like the full-size station wagons, and used the same size
tires. As construction go-fer vehicles, they worked fine. No, I couldn't
haul a full cube of block or shingles with them, but they did what they
needed to do, and a small-block v8 provided enough power. A baby pickup
like the stretch-cab ranger or early-90s toyota would meet 95% of my
current hauling needs, and would probably fit in my garage. (My head
does bang the rear window on the regular-cab version, and you do need
SOME weather-protected hauling space.)

--
aem sends...

OT - Dodge Acronym
 

"Doug Miller" wrote in message
...
In article , "Stormin Mormon"
wrote:
Ford: Fix or Repair Daily / Found on Road Dead
GMC: Got Mechanic Coming.

FIAT: Fix it again, Tony. Fix it again today. Fix it again tomorrow.

Is there one for Dodge?

Damned Old Dodge Goes Everywhere.


Subaru spelled backwards is U R A BUS

OT - Dodge Acronym
 

On Tue, 03 Nov 2009 18:55:14 -0500, aemeijers wrote:
Does anyone make a small pickup any more? Like the rangers or toyotas
from 10-15 years ago?

Probably not :-(

We've got a '67 F100 with the long bed for when we need to move anything
that won't fit in the car. No power brakes, power windows, power anything.
Beautiful to work on - the sort of tech where you can often do an
emergency fix it by the side of the road if needed using spit and baling
wire :-)

Sure, it doesn't like going over 55, but who really gives a crap?

cheers

Jules

OT - Dodge Acronym
 

aemeijers wrote:

Does anyone make a small pickup any more? Like the rangers or toyotas
from 10-15 years ago? All the stuff on the lots now looks huge, not to
mention looking like a Tonka toy. Big meaningless chrome phallic noses,
pointless huge tires, etc. Does anyone make a truck that looks like a
truck anymore? I'm a form follows function sort of person- I don't need
rolling bling.

Oh gawd, I know what you mean about the Tonka toys. Big fat fender
flares with giant fake plastic bolts. How much uglier can they get?
Actually that is an unfair comparison to Tonka Toys, the toys look much
better then the real trucks.

Speaking of trucks... was OT - Dodge Acronym
 

It seems that for a few years now every new truck, SUV, or anything that
isn't quite a car comes from the factory with the towing package
standard. Are more people towing these days? Or is this a local
phenomenon?

Speaking of trucks... was OT - Dodge Acronym
 

On Nov 4, 10:45*am, Tony wrote:
It seems that for a few years now every new truck, SUV, or anything that
isn't quite a car comes from the factory with the towing package
standard. *Are more people towing these days? *Or is this a local
phenomenon?

I dunno, but if that's true that's good news. Every time I've tried
to rent a car trailer from U-Haul or similar rental company they
always find some reason that my proposed tow vehicle isn't acceptable
(no trans cooler; rating of step bumper isn't heavy enough, or some
other reason)

when I was looking for a cheap used pickup truck pickings were pretty
slim. ended up with a 6-cyl. F-150 with no tow package. Would really
have preferred a 3/4 ton Chevy or (pre-New Ram) Dodge, but good luck
finding one that's a) affordable and b) not beat to **** or rusted out

nate

OT - Dodge Acronym
 

On Nov 3, 11:21*pm, aemeijers wrote:
Nate Nagel wrote:
aemeijers wrote:

Does anyone make a small pickup any more? Like the rangers or toyotas
from 10-15 years ago? All the stuff on the lots now looks huge, not to
mention looking like a Tonka toy. Big meaningless chrome phallic
noses, pointless huge tires, etc. Does anyone make a truck that looks
like a truck anymore? I'm a form follows function sort of person- I
don't need rolling bling.

I hear that. *It seems that even the full size trucks get bigger and
bigger. *I've got a 93 F-150 and I feel like the bed sides are really
tall - taller than my dad's '73 Chevy and WAY taller than some old
Studebakers I've worked on. *But parked next to a NEW F-150 mine appears
comparatively easy to load.

Why is it that both the bed floor and the top of the bed sides seems to
creep up every revision of a truck chassis? *Wouldn't a LOW bed floor be
a selling feature? *Some of these new trucks ought to come with a
folding stepstool shoved behind the seat.

nate

I think a saw a couple brands advertising fold-out bed and bumper steps
a couple years ago. I think they have super-sized the apparent visual
dimensions, and raised the bed and sidewall heights, to make them look
Big and Tough, and in proportion with the giant tires. (Pretty useless
for the 2/3 of trucks that never leave the pavement. And guess what, 4x4
guys? In snow, tall and skinny works better.)

When Ford split off their heavy pickup line about 10-12 years back, they
suddenly had a lot of complaints from gooseneck and 5th wheel owners
(one of the few groups that really need big trucks). The steep rake and
high bedsides meant the old hitches were not tall enough, and if they
raised the hitch up so bed sides and trailer didn't hit in bumpy roads,
the tow geometry was all wrong. Guys that pull goosenecks for a living
were having to buy chassis-cabs and get purpose-built diamond-plate
utility beds put on.

As a kid, I had a couple of mid-70s Ford F150s as company trucks. They
drove about like the full-size station wagons, and used the same size
tires. As construction go-fer vehicles, they worked fine. No, I couldn't
haul a full cube of block or shingles with them, but they did what they
needed to do, and a small-block v8 provided enough power. A baby pickup
like the stretch-cab ranger or early-90s toyota would meet 95% of my
current hauling needs, and would probably fit in my garage. (My head
does bang the rear window on the regular-cab version, and you do need
SOME weather-protected hauling space.)

--
aem sends...- Hide quoted text -

- Show quoted text -

"I think a saw a couple brands advertising fold-out bed and bumper
steps a couple years ago."

Now *that* brings back memories!

My 1966 Rambler Ambassador came with a full size bed installed.

Remember the Blues Brothers song " 'b' Movie Box Car Blues" ?

Next I caught a ride with gambler's wife
She had a brand new lay down Rambler
She parked inside of town, layed the Rambler down
She said she sure could dig if I'd knew her

The rear seat was a full bench. The front seat was bench with a split
back.

If you pulled the front seat all the way forward and reclined the 2
sections of the back of the seat, they lined up evenly with the rear
bench and turned the whole interior into a bed.

The stories I could tell!

http://brining.com/autoauction/1966R...Ambassador.JPG

OT - Dodge Acronym
 

On Nov 4, 8:37*am, Tony wrote:
aemeijers wrote:

Does anyone make a small pickup any more? Like the rangers or toyotas
from 10-15 years ago? All the stuff on the lots now looks huge, not to
mention looking like a Tonka toy. Big meaningless chrome phallic noses,
pointless huge tires, etc. Does anyone make a truck that looks like a
truck anymore? I'm a form follows function sort of person- I don't need
rolling bling.

Oh gawd, I know what you mean about the Tonka toys. *Big fat fender
flares with giant fake plastic bolts. *How much uglier can they get?
Actually that is an unfair comparison to Tonka Toys, the toys look much
better then the real trucks.

My big concern is what is being called a "truck" now and where the new
trucks are going to in design.
I saw an SUV with a two foot long bed and they called it a truck. I'm
not sure what they can haul in that small of a bed.
I've noticed that there are very few new trucks being made that have
the 8' long bed now. Most of the "150/1500" size trucks come with a
back seat (crew cab) and a 6.5' bed. At least the 8' bed allows you to
haul sheet material, such as drywall or plywood, with the tailgate
up. I always laugh when I'm at the lumber yard and I see people
putting trying to fit a sheet of plywood into a short-bed pickup
having it hang over the tailgate. I definitely avoid being behind
them in case it slips out of the truck.

Rob

OT - Dodge Acronym
 

Jules wrote:
On Wed, 04 Nov 2009 10:37:50 -0500, Tony wrote:

aemeijers wrote:
Does anyone make a small pickup any more? Like the rangers or toyotas
from 10-15 years ago? All the stuff on the lots now looks huge, not to
mention looking like a Tonka toy. Big meaningless chrome phallic noses,
pointless huge tires, etc. Does anyone make a truck that looks like a
truck anymore? I'm a form follows function sort of person- I don't need
rolling bling.
Oh gawd, I know what you mean about the Tonka toys. Big fat fender
flares with giant fake plastic bolts. How much uglier can they get?
Actually that is an unfair comparison to Tonka Toys, the toys look much
better then the real trucks.

I was puzzling over this a while ago. When I grew up, Tonka toys were
almost entirely* metal. When the heck did they stop? I saw some the
other day in the store, and they were all crappy plastic. Did someone flip
out over the possiblity of metal cuts or hard corners hurting their kid,
or are they just cheaper to make that way?

* they may have had plastc wheels, or maybe metal wheels with rubber tires
- I don't remember now. But the bodies were entirely metal.

I'm sorry to hear that, I haven't bought any tonka toys in a long time
but down the road from me a young boy has about a 4' circle were he
killed all the grass and his metal tonka toys are always sitting there.
It's really cute to see. I am a little surprised no one stole the
metal tonka toys. The only bad thing about his little tonka playground
is that it's only about 6 feet from the road.

OT - Dodge Acronym
 

DerbyDad03 wrote:
On Nov 3, 11:21 pm, aemeijers wrote:
Nate Nagel wrote:
aemeijers wrote:
Does anyone make a small pickup any more? Like the rangers or toyotas
from 10-15 years ago? All the stuff on the lots now looks huge, not to
mention looking like a Tonka toy. Big meaningless chrome phallic
noses, pointless huge tires, etc. Does anyone make a truck that looks
like a truck anymore? I'm a form follows function sort of person- I
don't need rolling bling.
I hear that. It seems that even the full size trucks get bigger and
bigger. I've got a 93 F-150 and I feel like the bed sides are really
tall - taller than my dad's '73 Chevy and WAY taller than some old
Studebakers I've worked on. But parked next to a NEW F-150 mine appears
comparatively easy to load.
Why is it that both the bed floor and the top of the bed sides seems to
creep up every revision of a truck chassis? Wouldn't a LOW bed floor be
a selling feature? Some of these new trucks ought to come with a
folding stepstool shoved behind the seat.
nate
I think a saw a couple brands advertising fold-out bed and bumper steps
a couple years ago. I think they have super-sized the apparent visual
dimensions, and raised the bed and sidewall heights, to make them look
Big and Tough, and in proportion with the giant tires. (Pretty useless
for the 2/3 of trucks that never leave the pavement. And guess what, 4x4
guys? In snow, tall and skinny works better.)

When Ford split off their heavy pickup line about 10-12 years back, they
suddenly had a lot of complaints from gooseneck and 5th wheel owners
(one of the few groups that really need big trucks). The steep rake and
high bedsides meant the old hitches were not tall enough, and if they
raised the hitch up so bed sides and trailer didn't hit in bumpy roads,
the tow geometry was all wrong. Guys that pull goosenecks for a living
were having to buy chassis-cabs and get purpose-built diamond-plate
utility beds put on.

As a kid, I had a couple of mid-70s Ford F150s as company trucks. They
drove about like the full-size station wagons, and used the same size
tires. As construction go-fer vehicles, they worked fine. No, I couldn't
haul a full cube of block or shingles with them, but they did what they
needed to do, and a small-block v8 provided enough power. A baby pickup
like the stretch-cab ranger or early-90s toyota would meet 95% of my
current hauling needs, and would probably fit in my garage. (My head
does bang the rear window on the regular-cab version, and you do need
SOME weather-protected hauling space.)

--
aem sends...- Hide quoted text -

- Show quoted text -

"I think a saw a couple brands advertising fold-out bed and bumper
steps a couple years ago."

Now *that* brings back memories!

My 1966 Rambler Ambassador came with a full size bed installed.

Remember the Blues Brothers song " 'b' Movie Box Car Blues" ?

Next I caught a ride with gambler's wife
She had a brand new lay down Rambler
She parked inside of town, layed the Rambler down
She said she sure could dig if I'd knew her

The rear seat was a full bench. The front seat was bench with a split
back.

If you pulled the front seat all the way forward and reclined the 2
sections of the back of the seat, they lined up evenly with the rear
bench and turned the whole interior into a bed.

The stories I could tell!

http://brining.com/autoauction/1966R...Ambassador.JPG


I believe the Studebaker Wagonaire (remember, the wagon with the sliding
roof?) had an available fold out step on the tailgate. The funny thing
is you really didn't need it as the load floor was so low to the ground
(even before the rear springs inevitably sagged...)

nate

--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel

OT - Dodge Acronym
 

On Thu, 5 Nov 2009 14:50:33 -0800 (PST), rlz wrote:

I saw an SUV with a two foot long bed and they called it a truck. I'm
not sure what they can haul in that small of a bed.

Groceries?

I call that a "grocery gitter"

OT - Dodge Acronym
 

Dead Or Dying Government Enterprise

OT - Dodge Acronym
 

Oren wrote:
On Thu, 5 Nov 2009 14:50:33 -0800 (PST), rlz wrote:

I saw an SUV with a two foot long bed and they called it a truck. I'm
not sure what they can haul in that small of a bed.

Groceries?

I call that a "grocery gitter"
Around here, six-seven months out of the year, those groceries would be
pretty soggy once you got them home. Reminds me of when El Caminos and
Rancheros were popular, with their foot-tall beds. The popular wisdom
was that all they were good for is hauling beer, cubes of peat moss, and
getting laid in on warm summer nights.

--
aem sends...

OT - Dodge Acronym
 

"rlz" wrote in message

My big concern is what is being called a "truck" now and where the new
trucks are going to in design.
I saw an SUV with a two foot long bed and they called it a truck. I'm
not sure what they can haul in that small of a bed.
I've noticed that there are very few new trucks being made that have
the 8' long bed now.

Ever look at what most truck haul? Nothing. I know a lot of people that
have trucks that have never had anything more than a couple of bags of
groceries or a picnic cooler, but the owner want a truck. I'd rather have
the comfort and smooth ride and better handling of a car.