Shed project question
have a dumb question about my shed project......I'm constructing a 12x16
shed. have poured concrete slab and put down one row of concrete blocks, I will pick up lumber tomorrow. planning to use 5/8" T-111 plywood siding. Question is should I frame so that siding sits on top of concrete blocks or should I frame with 2x4s to edge of concrete blocks and overhang siding? Total height of walls including concrete blocks is 7' thanks |
Shed project question
On Sep 13, 12:03*pm, wrote:
have a dumb question about my shed project......I'm constructing a 12x16 shed. have poured concrete slab and put down one row of concrete blocks, I will pick up lumber tomorrow. planning to use 5/8" *T-111 plywood siding. Question is should I frame so that siding sits on top of concrete blocks or should I frame with 2x4s to edge of concrete blocks and overhang siding? Total height of walls including concrete blocks is 7' * * * * * * * * thanks If you want the water that hits the walls to run into the shed then by all means let the siding rest on the blocks. G Outside the blocks should work OK. Some installers will chamfer the square bottom of the siding 45 degrees toward the inside to have a nice sharp outside drip edge. Paint the edge well, of course. Joe |
Shed project question
|
All times are GMT +1. The time now is 11:11 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter