extension cords
 

rb wrote:
Got into a box of extension cords today. Found an old outside 110 2 wire
one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?


Hi,
To isolate ground wire. I often do that when I am using my O'scope for
certain measurement.

extension cords
 

Got into a box of extension cords today. Found an old outside 110 2 wire
one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?

extension cords
 

"rb" wrote in message
...
Got into a box of extension cords today. Found an old outside 110 2 wire
one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?

Same thing that has been done with them for decades, extend cords.
Especially useful for lights and double insulated tools. You can even use it
inside the house.

extension cords
 

Ed Pawlowski wrote:
"rb" wrote in message
...
Got into a box of extension cords today. Found an old outside 110 2 wire
one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?

Same thing that has been done with them for decades, extend cords.
Especially useful for lights and double insulated tools. You can even use it
inside the house.


LOL

extension cords
 

"Ed Pawlowski" wrote in message
...

"rb" wrote in message
...
Got into a box of extension cords today. Found an old outside 110 2
wire one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?

Same thing that has been done with them for decades, extend cords.
Especially useful for lights and double insulated tools. You can even use
it inside the house.

That right thar is funny, I don't care who you are.

extension cords
 

Got into a box of extension cords today. Found an old outside 110 2 wire
one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?


Use them for double-insulated electric tools and Christmas lights. The
problem with some tools and lights, though is that they may have the
one-blade-larger plugs that won't fit an older two-wire extension cord.
I've noticed that some Christmas light strings have the wider blade,
some don't.

Northe

extension cords
 

rb wrote:
Got into a box of extension cords today. Found an old outside 110 2 wire
one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?



Troubleshooting electrical problems in vehicles. Clip it to the battery
and you will have a known +12 or a known ground for your test light.

extension cords
 

Northe wrote:
Got into a box of extension cords today. Found an old outside 110
2 wire one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?


Use them for double-insulated electric tools and Christmas lights. The
problem with some tools and lights, though is that they may have the
one-blade-larger plugs that won't fit an older two-wire extension
cord. I've noticed that some Christmas light strings have the wider
blade, some don't.


The new plugs will fit the older cords if you grind down the polarizing
plug.

A Dremel tool works swell for this.

extension cords
 

On 9/11/2009 7:29 PM HeyBub spake thus:

Northe wrote:

Got into a box of extension cords today. Found an old outside 110
2 wire one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?

Use them for double-insulated electric tools and Christmas lights. The
problem with some tools and lights, though is that they may have the
one-blade-larger plugs that won't fit an older two-wire extension
cord. I've noticed that some Christmas light strings have the wider
blade, some don't.

The new plugs will fit the older cords if you grind down the polarizing
plug.

A Dremel tool works swell for this.

So does an ordinary hand file. Voop voop--done.


--
Found--the gene that causes belief in genetic determinism

extension cords
 

"David Nebenzahl" wrote in message
The new plugs will fit the older cords if you grind down the polarizing
plug.

A Dremel tool works swell for this.

So does an ordinary hand file. Voop voop--done.



Not that simple. You need a permit first, the work must be done by a
licensed professional and you have to file a plan to dispose of the copper
filings in a safe manner. Finished cord must be inspected by the same
outfit that applies the mattress tags.

extension cords
 

David Nebenzahl wrote:
On 9/11/2009 7:29 PM HeyBub spake thus:

Northe wrote:

Got into a box of extension cords today. Found an old outside 110
2 wire one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?

Use them for double-insulated electric tools and Christmas lights. The
problem with some tools and lights, though is that they may have the
one-blade-larger plugs that won't fit an older two-wire extension
cord. I've noticed that some Christmas light strings have the wider
blade, some don't.

The new plugs will fit the older cords if you grind down the
polarizing plug.

A Dremel tool works swell for this.

So does an ordinary hand file. Voop voop--done.



Diagonal wire cutters are quicker.

TDD

extension cords
 

rb wrote:
Got into a box of extension cords today. Found an old outside 110 2 wire
one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?



Sell them to your nearest mobster. They have many uses
for them.

TDD

extension cords
 

The Daring Dufas wrote:
David Nebenzahl wrote:
On 9/11/2009 7:29 PM HeyBub spake thus:

Northe wrote:

Got into a box of extension cords today. Found an old outside
110 2 wire one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?

Use them for double-insulated electric tools and Christmas lights.
The problem with some tools and lights, though is that they may
have the one-blade-larger plugs that won't fit an older two-wire
extension cord. I've noticed that some Christmas light strings
have the wider blade, some don't.

The new plugs will fit the older cords if you grind down the
polarizing plug.

A Dremel tool works swell for this.

So does an ordinary hand file. Voop voop--done.



Diagonal wire cutters are quicker.

It's okay - you can say what you mean. This is not a particularily PC
newsgroup - "Dikes" is permitted.

extension cords
 

"HeyBub" wrote in message

Diagonal wire cutters are quicker.

It's okay - you can say what you mean. This is not a particularily PC
newsgroup - "Dikes" is permitted.


I'm not sure I'd know what to do with a -pair- of them though.

extension cords
 

On Sep 12, 7:46*am, "HeyBub" wrote:
The Daring Dufas wrote:
David Nebenzahl wrote:
On 9/11/2009 7:29 PM HeyBub spake thus:

Northe wrote:

Got into a box of extension cords today. * Found an old outside
110 2 wire one. * Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?

Use them for double-insulated electric tools and Christmas lights.
The problem with some tools and lights, though is that they may
have the one-blade-larger plugs that won't fit an older two-wire
extension cord. I've noticed that some Christmas light strings
have the wider blade, some don't.

The new plugs will fit the older cords if you grind down the
polarizing plug.

A Dremel tool works swell for this.

So does an ordinary hand file. Voop voop--done.

Diagonal wire cutters are quicker.

It's okay - you can say what you mean. This is not a particularily PC
newsgroup - "Dikes" is permitted.

I was asked by a friend to help with some electrical problem at a
rural retreat center were I was attending a conference. The friend
lived nearby and was familiar with the staff of the center which I was
not. After poking around at the problem for a few minutes I found the
cause and decided that the entire circuit had to be rewired. As we
were walking towards the workshop to see what might be available for
tools. I complained that I hated working with other peoples tools
because they never have exactly what I think I need to do the job and
I finished up by saying that I bet there wasn't one pair of dikes in
the whole place. My buddy chuckled and said "I can assure you there
are several sets of dikes here." It took me several additional steps
to realize what he was trying to tell me. It then took me several
minutes to compose myself so I could resume work.

--
Tom Horne

extension cords
 

HeyBub wrote:
The Daring Dufas wrote:
David Nebenzahl wrote:
On 9/11/2009 7:29 PM HeyBub spake thus:

Northe wrote:

Got into a box of extension cords today. Found an old outside
110 2 wire one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?
Use them for double-insulated electric tools and Christmas lights.
The problem with some tools and lights, though is that they may
have the one-blade-larger plugs that won't fit an older two-wire
extension cord. I've noticed that some Christmas light strings
have the wider blade, some don't.
The new plugs will fit the older cords if you grind down the
polarizing plug.

A Dremel tool works swell for this.
So does an ordinary hand file. Voop voop--done.


Diagonal wire cutters are quicker.

It's okay - you can say what you mean. This is not a particularily PC
newsgroup - "Dikes" is permitted.



Some of my best friends are diagonal wire cutters.

TDD

extension cords
 

Ed Pawlowski wrote:
"HeyBub" wrote in message

Diagonal wire cutters are quicker.

It's okay - you can say what you mean. This is not a particularily PC
newsgroup - "Dikes" is permitted.


I'm not sure I'd know what to do with a -pair- of them though.

I've always enjoyed just watching them...

extension cords
 

The Daring Dufas wrote:
HeyBub wrote:
The Daring Dufas wrote:
David Nebenzahl wrote:
On 9/11/2009 7:29 PM HeyBub spake thus:

Northe wrote:

Got into a box of extension cords today. Found an old outside
110 2 wire one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?
Use them for double-insulated electric tools and Christmas lights.
The problem with some tools and lights, though is that they may
have the one-blade-larger plugs that won't fit an older two-wire
extension cord. I've noticed that some Christmas light strings
have the wider blade, some don't.
The new plugs will fit the older cords if you grind down the
polarizing plug.

A Dremel tool works swell for this.
So does an ordinary hand file. Voop voop--done.


Diagonal wire cutters are quicker.

It's okay - you can say what you mean. This is not a particularily PC
newsgroup - "Dikes" is permitted.


Some of my best friends are diagonal wire cutters.

TDD

What's the best tool for cutting round wire?

extension cords
 

E Z Peaces wrote:
The Daring Dufas wrote:
HeyBub wrote:
The Daring Dufas wrote:
David Nebenzahl wrote:
On 9/11/2009 7:29 PM HeyBub spake thus:

Northe wrote:

Got into a box of extension cords today. Found an old outside
110 2 wire one. Is there any reason to keep this???

What can you do with 110v 2 wire extension cords?
Use them for double-insulated electric tools and Christmas lights.
The problem with some tools and lights, though is that they may
have the one-blade-larger plugs that won't fit an older two-wire
extension cord. I've noticed that some Christmas light strings
have the wider blade, some don't.
The new plugs will fit the older cords if you grind down the
polarizing plug.

A Dremel tool works swell for this.
So does an ordinary hand file. Voop voop--done.


Diagonal wire cutters are quicker.

It's okay - you can say what you mean. This is not a particularily PC
newsgroup - "Dikes" is permitted.


Some of my best friends are diagonal wire cutters.

TDD

What's the best tool for cutting round wire?

I have cable cutters for that. I have flush cutters too
and they have nothing to do with toilets.

TDD

extension cords
 

Well, you can't put round peg into a square hole. So, I
hope you can find a pair of round diags.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"E Z Peaces" wrote in message
...

Some of my best friends are diagonal wire cutters.

TDD

What's the best tool for cutting round wire?