Thin profile socket/ratchet wrench needed
 

Hello,

I am trying to find a wrench that will will drive a 5/16" hex screw. I
would like a ratcheting type wrench. It should not be a right angled
wrench but a straight one. I only have about 2/3" clearance to work
with.

Any ideas?

Thanks
Mike

Thin profile socket/ratchet wrench needed
 

I use a nut driver to drive that type of head. There are also nut
drivers with a 1/4" hex shaft on the other end that can be inserted
into an impact driver. Plenty of power there.

On Wed, 13 May 2009 19:51:55 -0700 (PDT), eljainc
wrote:

Hello,

I am trying to find a wrench that will will drive a 5/16" hex screw. I
would like a ratcheting type wrench. It should not be a right angled
wrench but a straight one. I only have about 2/3" clearance to work
with.

Any ideas?

Thanks
Mike

Thin profile socket/ratchet wrench needed
 

On Wed, 13 May 2009 19:51:55 -0700 (PDT), eljainc
wrote:

Hello,

I am trying to find a wrench that will will drive a 5/16" hex screw. I
would like a ratcheting type wrench. It should not be a right angled
wrench but a straight one. I only have about 2/3" clearance to work
with.

I can't follow you at all, not right angled, straight, socket.

But Home Depot for a while had and probalby still has in the tool
department a socket wrench handle that would also twist the socket by
twisting the handle, so no motion was needed by the handle itself.

Any ideas?

Thanks
Mike

Thin profile socket/ratchet wrench needed
 

On Wed, 13 May 2009 19:51:55 -0700 (PDT), eljainc
wrote:

Hello,

I am trying to find a wrench that will will drive a 5/16" hex screw. I
would like a ratcheting type wrench. It should not be a right angled
wrench but a straight one. I only have about 2/3" clearance to work
with.

Any ideas?

Thanks
Mike

Here is one solution.
http://buy1.snapon.com/catalog/item....re&dir=catalog

Thin profile socket/ratchet wrench needed
 

On May 13, 10:51*pm, eljainc wrote:
Hello,

I am trying to find a wrench that will will drive a 5/16" hex screw. I
would like a ratcheting type wrench. It should not be a right angled
wrench but a straight one. I only have about 2/3" clearance to work
with.

Any ideas?

Thanks
Mike

Get a side terminal battery wrench. Most auto parts stores sell them.

http://www.harborfreight.com/cpi/cta...0VGA&Submit=Go

Thin profile socket/ratchet wrench needed
 

On May 13, 10:51*pm, eljainc wrote:
I am trying to find a wrench that will will drive a 5/16" hex screw. I
would like a ratcheting type wrench. It should not be a right angled
wrench but a straight one. I only have about 2/3" clearance to work
with.

In those cases I just suck it up and grab the regular old combination
wrench. Takes longer, but takes less time and money than searching for
a specialty tool to do the job "conveniently."

While you're sitting here waiting for someone to recommend the magic
tool, I'm done tightening the screw and I'm off to my next job.

Thin profile socket/ratchet wrench needed
 

Auto parts store, get a battery terminal wrench. They come
in 5/16 or 10mm.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"eljainc" wrote in message
...
Hello,

I am trying to find a wrench that will will drive a 5/16"
hex screw. I
would like a ratcheting type wrench. It should not be a
right angled
wrench but a straight one. I only have about 2/3" clearance
to work
with.

Any ideas?

Thanks
Mike

Thin profile socket/ratchet wrench needed
 

wrote in message
...
On Wed, 13 May 2009 19:51:55 -0700 (PDT), eljainc
wrote:

Hello,

I am trying to find a wrench that will will drive a 5/16" hex screw. I
would like a ratcheting type wrench. It should not be a right angled
wrench but a straight one. I only have about 2/3" clearance to work
with.

Any ideas?

Thanks
Mike

Here is one solution.
http://buy1.snapon.com/catalog/item....re&dir=catalog


That's the perfect solution. I believe Craftsman makes a similar series of
tools.