Home electricial testers
 

IMO DIYers would do better not to use a mulitmeter for home wiring.

The main tester I think home owners should use is one like this. It
tests voltage and continuity. No phantom readings.
http://tinyurl.com/5czhas

These are pretty handy too.
http://www.professionalequipment.com...rcuit-testers/

Home electricial testers
 

On Sun, 03 Aug 2008 22:16:00 -0400, metspitzer wrote:
IMO DIYers would do better not to use a mulitmeter for home wiring.

I tried a neon test light once; it was worthless, the capacitance
between adjacent wires in a romex cable was enough to display
continuity. I ended up creating a "test lamp" using a 15W bulb in a
lamp fixture to get the job done.

Home electricial testers
 

"metspitzer" wrote in message
...
IMO DIYers would do better not to use a mulitmeter for home wiring.

The main tester I think home owners should use is one like this. It
tests voltage and continuity. No phantom readings.
http://tinyurl.com/5czhas

These are pretty handy too.
http://www.professionalequipment.com...rcuit-testers/

Before getting any tester (with the exception perhaps of the outlet tester)
the DIYer should first learn the basics of electricity.

Without that basic understanding, all the data that get from the meters of
any sort will not lead to a safe do it yourself repair.

If you screw up a carpentry job or the paint looks like hell a blunder there
will only hurt your pride and pocketbook.

Mess up an electrical project and you may get to meet the local fire
department or even worse the local EMTs or coroner.

Charlie

Home electricial testers
 

In article ,
metspitzer wrote:
IMO DIYers would do better not to use a mulitmeter for home wiring.

Why not?

Thanks!


The main tester I think home owners should use is one like this. It
tests voltage and continuity. No phantom readings.
http://tinyurl.com/5czhas

These are pretty handy too.
http://www.professionalequipment.com...rcuit-testers/

Home electricial testers
 

A tester like the one in the link will tell you if the circuit is
live/dead or open/closed.

Multi meters are very sensitive. With them, you can get phantom
voltage readings (Google it) which can be misleading.

"Most" DIYers will have better results testing for on/off or
make/break conditions.

On Sat, 30 Aug 2008 02:35:59 +0000 (UTC), (David
Combs) wrote:

In article ,
metspitzer wrote:
IMO DIYers would do better not to use a mulitmeter for home wiring.

Why not?

Thanks!


The main tester I think home owners should use is one like this. It
tests voltage and continuity. No phantom readings.
http://tinyurl.com/5czhas

These are pretty handy too.
http://www.professionalequipment.com...rcuit-testers/