carburator adjustment honda mower
There are two screws. One changes a stop on a control. The second will
only allow about a 60* adjustment. What does this 2nd adjuster do? |
carburator adjustment honda mower
p4o2 wrote:
There are two screws. One changes a stop on a control. The second will only allow about a 60* adjustment. What does this 2nd adjuster do? Typical carb has two -- idle and mixture. -- |
carburator adjustment honda mower
On Jun 10, 9:40*am, p4o2 wrote:
There are two screws. One changes a stop on a control. The second will only allow about a 60* adjustment. What does this 2nd adjuster do? One is likely rpm to the govenor, and you need 3600 rpm for 120v, to set it you need a v meter, I would not start turning stuff until you know what you are doing or need. |
carburator adjustment honda mower
On Jun 10, 1:07*pm, ransley wrote:
On Jun 10, 9:40*am, p4o2 wrote: There are two screws. One changes a stop on a control. The second will only allow about a 60* adjustment. What does this 2nd adjuster do? One is likely rpm to the govenor, and you need 3600 rpm for 120v, to set it you need a v meter, I would not start turning stuff until you know what you are doing or need. This honda mower is a real pain to get to the screws. No way can I turn them while the mower is running (in fact a tube going to the air cleaner blocks the way) |
carburator adjustment honda mower
On Jun 10, 6:16*pm, p4o2 wrote:
On Jun 10, 1:07*pm, ransley wrote: On Jun 10, 9:40*am, p4o2 wrote: There are two screws. One changes a stop on a control. The second will only allow about a 60* adjustment. What does this 2nd adjuster do? One is likely rpm to the govenor, and you need 3600 rpm for 120v, to set it you need a v meter, I would not start turning stuff until you know what you are doing or need. This honda mower is a real pain to get to the screws. No way can I turn them while the mower is running (in fact a tube going to the air cleaner blocks the way) Gee and I thought you said Generator , sorry. |
All times are GMT +1. The time now is 09:08 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter