Ice Makers
I am getting a new refrigerator today and will put the old one in the
garage. I would like to remove the old ice maker so I would have more space in the freezer. Does anyone know how difficult this is? (Frigidaire) And is it safe to just take it out? I mean, I assume there won't be any wires left just dangling....but I don't know for sure. Any help would be appreciated. Thanks. |
Ice Makers
You should be able to just remove it. As an example, my refrigerator
has as an option an ice maker that I can install, and there is an electrical connector flush to the inside wall that I can connect it to. Presumaby therewould also be a hole in the refrigerator somewhere where the water line used to be that you would have to plug. I am assuming that your ice maker is entirely inside the refrigerator, as opposed to the type with a feed in the door (which you can probably also just disconnect, but I personally wouldn't know). |
Ice Makers
On Apr 14, 7:17 am, Dottie wrote:
I am getting a new refrigerator today and will put the old one in the garage. I would like to remove the old ice maker so I would have more space in the freezer. Does anyone know how difficult this is? (Frigidaire) And is it safe to just take it out? I mean, I assume there won't be any wires left just dangling....but I don't know for sure. Any help would be appreciated. Thanks. Information on the model would be best as there are website that offer schematics that will show the installation and removal procedures for appliance components. However on average the removal of the in freezer ice maker mechanism is not too difficult providing you have basic mechanical/tool knowledge. What you want to check for is post removal openings that will allow outside air to enter the compartment and reduce the efficiency of your unit. Post your Refrigerator make and model and I'll try to find a web site for you. |
Ice Makers
On Apr 14, 7:17 am, Dottie wrote:
I am getting a new refrigerator today and will put the old one in the garage. I would like to remove the old ice maker so I would have more space in the freezer. Does anyone know how difficult this is? (Frigidaire) And is it safe to just take it out? I mean, I assume there won't be any wires left just dangling....but I don't know for sure. Any help would be appreciated. Thanks. Here is one web site to get you started Have a good day! |
Ice Makers
On Apr 14, 7:17 am, Dottie wrote:
I am getting a new refrigerator today and will put the old one in the garage. I would like to remove the old ice maker so I would have more space in the freezer. Does anyone know how difficult this is? (Frigidaire) And is it safe to just take it out? I mean, I assume there won't be any wires left just dangling....but I don't know for sure. Any help would be appreciated. Thanks. Ooops!! Forgot the paste: http://www.appliance411.com/parts/partslists.shtml Sorry about that! |
Ice Makers
On Apr 14, 9:53 am, gigster wrote:
On Apr 14, 7:17 am, Dottie wrote: I am getting a new refrigerator today and will put the old one in the garage. I would like to remove the old ice maker so I would have more space in the freezer. Does anyone know how difficult this is? (Frigidaire) And is it safe to just take it out? I mean, I assume there won't be any wires left just dangling....but I don't know for sure. Any help would be appreciated. Thanks. Ooops!! Forgot the paste:http://www.appliance411.com/parts/partslists.shtml Sorry about that! The man who delivered the new one also moved the old refrigerator to the garage for us. He removed the old ice maker which had stopped working. He said I could just leave it the way it is - with a small hole where the water came in. I can feel no cold air coming out anywhere and it appears to be working fine. The freezer is still a lot colder on it than on the new one. Guess it will catch up. |
Ice Makers
He said I could just leave it the way it is - with a small
hole where the water came in. I can feel no cold air coming out anywhere and it appears to be working fine. Oh no...you should definitely plug it no matter how small. Even if you only put some tape over the inside and another piece over the outside. If there is a thickness being spanned then maybe stuff something in there like a wisp of fiberglass, a sliver of a Styrofoam packing peanut or even some plumber's putty or caulk and then tape over that. If it's just a rubber grommet with a 1/4" hole then just tape both inside and out. Electricity is too expensive to leave any hole. The freezer is still a lot colder on it than on the new one. Guess it will catch up. A new fridge can take a surprisingly long time to cool down. The machinery can fill the compartments with cold air in minutes but there's a lot of thermal mass with the inner walls, racks, etc. that take time to chill down. |
All times are GMT +1. The time now is 02:51 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter