Framing for a new Room - what hardware to use?
 

Should I use penny nails or screws for framing the lumber?

I am adamant that screws are a stronger, more robust way to frame the
room.

Framing for a new Room - what hardware to use?
 

wrote:
Should I use penny nails or screws for framing the lumber?

I am adamant that screws are a stronger, more robust way to frame
the room.

Maybe but nails have worked very well for a long time.

--

dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico

Framing for a new Room - what hardware to use?
 

Framing for a new Room - what hardware to use?
 

On Feb 27, 5:05 am, wrote:
Should I use penny nails or screws for framing the lumber?

I am adamant that screws are a stronger, more robust way to frame the
room.

Nails are generally more ductile....easier & faster to install (gun
driven or even hand nailed)

Screws (depending on the type you choose are) are often more
brittle...esp drywall screws which are frequently used in
inappropriate situations. They're call drywall screws for a reason.

Framing nailing is just there to hold the frame together. The
strength of the system really from the sheathing (drywall or
plywood) ...shear transfer through the structure is now usually
handled with framing connectors (Simpson hardware) but good old
blocked & nailed connections can work as well.

I'd suggest using 16d "shorts" 3 1/4" x .131 (really a 12d nail)
gun driven nails for your framing.

Yeah, the right screws can be stronger in some applications but in
earth quake country or high wind areas I'd put my money on a properly
design & constructed (nailed) structural system.

cheers
Bob

Framing for a new Room - what hardware to use?
 

On Feb 27, 8:05*am, wrote:
Should I use penny nails or screws for framing the lumber?

I am adamant that screws are a stronger, more robust way to frame
the room.

True.

And using 2 screws per stud end is an even stronger, more robust way
to frame the room. Lag bolts would be even stronger.

Now ask yourself: What would you gain by using screws over nails?
Under what circumstances would the extra expense be justified?

If rooms framed with nails were failing by the millions, then the
industry would have switched to screws along time ago. I'm going to
hazard a guess and say that most problems occur due to failure of the
wood itself, and/or poor construction methods, as opposed to the
fastener used - assuming it wasn't a plastic plug or chewing gum. g

Framing for a new Room - what hardware to use?
 

wrote:
Should I use penny nails or screws for framing the lumber?

I am adamant that screws are a stronger, more robust way to frame the
room.

You really need both. For the usual 3.5" screws an impact driver is
absolutely essential. The Makita 18V Li ion drivers are a good
choice. Using an air nailer is the fastest where there is plenty of
room to work. A typical pro tool is the Senco line using using KD29 or
ND29 3.5" 16d nails or HL27 3" 10d Ring Shank nails. The screws have
the highest holding power, ring shank nails are next and plain nails
are last but better these days than in the past with the coatings they
use. These modern tools are so easy to use these days that before long
hammers may only be used for breaking rocks. G

Joe

Framing for a new Room - what hardware to use?
 

Framing for a new Room - what hardware to use?
 

wrote
Should I use penny nails or screws for framing the lumber?

I am adamant that screws are a stronger, more robust way to frame the
room.

I have a feeling, there are 3 little pigs involved in this. And, a huff and
a puff.

Framing for a new Room - what hardware to use?
 

wrote
Should I use penny nails or screws for framing the lumber?

I am adamant that screws are a stronger, more robust way to frame the
room.

I have a feeling, there are 3 little pigs involved in this. And, a huff and
a puff.

Framing for a new Room - what hardware to use?
 

Framing for a new Room - what hardware to use?
 

On Wed, 27 Feb 2008 05:05:23 -0800, cebukid70 wrote:

Should I use penny nails or screws for framing the lumber?

I am adamant that screws are a stronger, more robust way to frame the
room.


glue and screw. works for furniture.