Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 261
Default Cabinet question

SteveB wrote:

I bought some pre made cabinets. On the bottoms, there are plastic
protectors on the corners where they sit on the floor. Should I leave these
on for any particular reason, or remove them? If I leave them on, I will
have to shim out from the wall at the top, which is no problem. Do they
provide any purpose, or are they only for protection during transportation?

Thanks.

Steve



Remove them and then repair all the staple holes in the
particle board. :-)

That was a joke. You don't really have to repair the holes.
I am just dumbfounded by how many staples they use to hold
TEMPORARY protection in place.

--
Robert Allison
Rimshot, Inc.
Georgetown, TX
  #2   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 340
Default Cabinet question

I bought some pre made cabinets. On the bottoms, there are plastic
protectors on the corners where they sit on the floor. Should I leave these
on for any particular reason, or remove them? If I leave them on, I will
have to shim out from the wall at the top, which is no problem. Do they
provide any purpose, or are they only for protection during transportation?

Thanks.

Steve


  #3   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 340
Default Cabinet question


"Robert Allison" wrote in message
news:uz8fj.110695$NL5.35910@trnddc05...
SteveB wrote:

I bought some pre made cabinets. On the bottoms, there are plastic
protectors on the corners where they sit on the floor. Should I leave
these on for any particular reason, or remove them? If I leave them on,
I will have to shim out from the wall at the top, which is no problem.
Do they provide any purpose, or are they only for protection during
transportation?

Thanks.

Steve


Remove them and then repair all the staple holes in the particle board.
:-)

That was a joke. You don't really have to repair the holes. I am just
dumbfounded by how many staples they use to hold TEMPORARY protection in
place.

--
Robert Allison Rimshot, Inc.
Georgetown, TX


They all went up today with no hitches. My first cabinet job. Will install
the lowers tomorrow, and make ready for the countertop guy and plumber.
Looks like rain tomorrow, so probably hang doors, install locks and fab mods
to the dog and cat doors.

Steve


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cabinet, Furniture Design Software, Autodesk QuickCAD v8.0, Punch Software Home Design Architectural Series 18 v6.0, SOLID V3.5 - CABINET VISION, Cabinet Design Centre v7.0 - Cubit, 20-20 Kitchen Design V6.1,Cabinet Vision Solid, Planit Millennium II athens.gr. Woodturning 0 September 3rd 04 07:45 AM
Cabinet, Furniture Design Software, Autodesk QuickCAD v8.0, Punch Software Home Design Architectural Series 18 v6.0, SOLID V3.5 - CABINET VISION, Cabinet Design Centre v7.0 - Cubit, 20-20 Kitchen Design V6.1,Cabinet Vision Solid, Planit Millennium II athens.gr. Home Repair 0 September 3rd 04 07:44 AM
Cabinet, Furniture Design Software, Autodesk QuickCAD v8.0, Punch Software Home Design Architectural Series 18 v6.0, SOLID V3.5 - CABINET VISION, Cabinet Design Centre v7.0 - Cubit, 20-20 Kitchen Design V6.1,Cabinet Vision Solid, Planit Millennium II athens.gr. Home Ownership 0 September 3rd 04 07:43 AM
Cabinet, Furniture Design Software, Autodesk QuickCAD v8.0, Punch Software Home Design Architectural Series 18 v6.0, SOLID V3.5 - CABINET VISION, Cabinet Design Centre v7.0 - Cubit, 20-20 Kitchen Design V6.1,Cabinet Vision Solid, Planit Millennium II athens.gr. UK diy 0 September 3rd 04 07:39 AM
Cabinet, Furniture Design Software, Autodesk QuickCAD v8.0, Punch Software Home Design Architectural Series 18 v6.0, SOLID V3.5 - CABINET VISION, Cabinet Design Centre v7.0 - Cubit, 20-20 Kitchen Design V6.1,Cabinet Vision Solid, Planit Millennium II athens.gr. Woodworking 0 September 3rd 04 07:13 AM


All times are GMT +1. The time now is 02:21 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"