DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   return air register with filter; make it? (https://www.diybanter.com/home-repair/227836-return-air-register-filter%3B-make.html)

werwer December 30th 07 08:40 PM

return air register with filter; make it?
 
Do they make a return air register with room for an air filter? The
registers in my house are one stud space long - 16", and about 8 - 10"
high. Thanks.

[email protected] December 30th 07 09:27 PM

return air register with filter; make it?
 
On Dec 30, 3:40�pm, werwer wrote:
Do they make a return air register with room for an air filter? �The
registers in my house are one stud space long - 16", and about 8 - 10"
high. �Thanks.


you can likely modify one to fit, the cheap cardboard and fiberglass
type.

the downside is it will decrease airflow and may raise heating and
cooling costs

a friends wife has too many birds, their dander clogs the furnace
filter.

he blocked completely the air return from the bird room.

no more troubles

Edwin Pawlowski December 30th 07 09:30 PM

return air register with filter; make it?
 

"werwer" wrote in message
...
Do they make a return air register with room for an air filter? The
registers in my house are one stud space long - 16", and about 8 - 10"
high. Thanks.


No, there is no need for them and they can cause more flow problems than
solve air quality.



werwer December 30th 07 09:43 PM

return air register with filter; make it?
 


you can likely modify one to fit, the cheap cardboard and fiberglass
type.

the downside is it will decrease airflow and may raise heating and
cooling costs


That's what I did. I clean them every two weeks. Sure wish they had
something you could just slip in and out. It's amazing what these
filters catch in the low velocity air. Thanks.

Dr. Hardcrab December 30th 07 09:54 PM

return air register with filter; make it?
 

"werwer" wrote in message
...
Do they make a return air register with room for an air filter? The
registers in my house are one stud space long - 16", and about 8 - 10"
high. Thanks.


http://www.airguidemfg.com/rg-11.pdf


John Grabowski December 30th 07 11:33 PM

return air register with filter; make it?
 

"werwer" wrote in message
...
Do they make a return air register with room for an air filter? The
registers in my house are one stud space long - 16", and about 8 - 10"
high. Thanks.



Mcmaster-Carr sells them. http://www.mcmaster.com page 601. I'm not sure
they are available in the smaller sizes. You better make sure you can find
the filters to fit before you buy them. As others mentioned it will affect
the balance of your system as the filters do restrict the air flow.


Big_Jake December 31st 07 02:46 AM

return air register with filter; make it?
 
On Dec 30, 3:30 pm, "Edwin Pawlowski" wrote:
"werwer" wrote in message

...

Do they make a return air register with room for an air filter? The
registers in my house are one stud space long - 16", and about 8 - 10"
high. Thanks.


No, there is no need for them and they can cause more flow problems than
solve air quality.


I have seen them used where a furnace is in an attic or crawl space,
and the filter would be much more accessible in the dwelling unit.
Whenever I have seen them, they are on systems where there is only one
return grille, and they are standard size filters. Of course, since
this is the ONLY filter on the furnace, it isn't any more restrictive
than a filter that was at the furnace.

JK


All times are GMT +1. The time now is 09:04 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter