DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Scorched hardwood floor (https://www.diybanter.com/home-repair/226868-scorched-hardwood-floor.html)

Artful Dodger December 21st 07 04:58 AM

Scorched hardwood floor
 
Help! Electric heater tipped over and scorched some boards
on hardwood floor. I caught it before it went too deep, but have
no idea how to remove the scorch. Your advice welcome!

RicodJour December 21st 07 05:40 AM

Scorched hardwood floor
 
On Dec 20, 11:58 pm, Artful Dodger wrote:
Help! Electric heater tipped over and scorched some boards
on hardwood floor. I caught it before it went too deep, but have
no idea how to remove the scorch. Your advice welcome!


You probably can't do it without refinishing the floor. If it's just
the floor finish that got scorched, you're lucky. You can scrape or
sand it, then do a touch-up patch of the floor finish. If the wood is
scorched, you'll either have to sand, scrape or bleach the wood - the
last being the most difficult to control and the least likely to give
results that will blend in with the rest of the floor.

R

dadiOH December 21st 07 10:26 AM

Scorched hardwood floor
 
RicodJour wrote:
On Dec 20, 11:58 pm, Artful Dodger wrote:
Help! Electric heater tipped over and scorched some boards
on hardwood floor. I caught it before it went too deep, but have
no idea how to remove the scorch. Your advice welcome!


You probably can't do it without refinishing the floor. If it's
just the floor finish that got scorched, you're lucky. You can
scrape or sand it, then do a touch-up patch of the floor finish.
If the wood is scorched, you'll either have to sand, scrape or
bleach the wood - the last being the most difficult to control and
the least likely to give results that will blend in with the rest
of the floor.

R


Another alternative for the OP is replacement of the scorched boards.

--

dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico





All times are GMT +1. The time now is 04:48 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter