RG6 Coxial Cable Staplegun
 

I wish to acquire a good quality staple gun for home-size coaxial cable. I
have seen the pros using the type I am looking for. It's the one that
requires TWO strokes of the stapler comes to mind. I'm thinking of the type
of fastener where each leg of a "common" staple is set individually and, when
the stapler is withdrawn, there is a black, plastic piece over the staple and
cable. Is there a model name or type name for this critter? TIA.
--
:)
JR

No project too small
All projects too big

RG6 Coxial Cable Staplegun
 

Jim Redelfs wrote:

I wish to acquire a good quality staple gun for home-size coaxial cable. I
have seen the pros using the type I am looking for. It's the one that
requires TWO strokes of the stapler comes to mind. I'm thinking of the type
of fastener where each leg of a "common" staple is set individually and, when
the stapler is withdrawn, there is a black, plastic piece over the staple and
cable. Is there a model name or type name for this critter? TIA.
--
:)
JR

No project too small
All projects too big

The Arrow T59 cable stapler works well. It only takes a single firing
though, and uses a "normal" one piece staple with a black plastic cable
fastener. I don't believe I've seen them at the big box stores, I got
mine at an electrical distributor.

RG6 Coxial Cable Staplegun
 

In article , "Pete C."
wrote:

The Arrow T59 cable stapler works well. It only takes a single firing
though, and uses a "normal" one piece staple with a black plastic cable
fastener. I don't believe I've seen them at the big box stores, I got
mine at an electrical distributor.

Thanks, Pete (and others). That is exactly what I'm looking for.

Amazon has it for ~$40.

http://www.amazon.com/gp/product/B00...8&coliid=I20ZY
S9MR20MEV&colid=3BIUHDH1Z4FNK

Apparently, this type of tool and/or staple is also used for stapling Cat5e
(and higher) to avoid crimping or otherwise damaging the cable. Thanks, again.
--
:)
JR

RG6 Coxial Cable Staplegun
 

http://www.arrowfastener.com/FMPro?-...=ET2025&-find=

Several sizes. Powerful enough to be a good tool. brads, flat and round
head staples. The stopper plate (optional usage) prevents the gun from
coming any closer to the wall when pushing it in- two settings, or without,
or other.



----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

RG6 Coxial Cable Staplegun
 

DA had written this in response to
http://thestuccocompany.com/maintena...un-270416-.htm
:

Jim Redelfs wrote:


I wish to acquire a good quality staple gun for home-size coaxial cable.
I
have seen the pros using the type I am looking for. It's the one that
requires TWO strokes of the stapler comes to mind. I'm thinking of the
type
of fastener where each leg of a "common" staple is set
individually and, when
the stapler is withdrawn, there is a black, plastic piece over the
staple and
cable. Is there a model name or type name for this critter? TIA.

I don't have/operated a stapler you describe but I can imagine it is still
set with one stroke on both sides. Regardless, a coax cable is a pretty
rigid one and will withstand some degree of abuse and so in vast majority
of cases all you need is ANY stapler that can be loaded with arched
staples to avoid flattening the cable.

\//.
-------------------------------------


##-----------------------------------------------##
Delivered via http://thestuccocompany.com/
Building Construction and Maintenance Forum
Web and RSS access to your favorite newsgroup -
alt.home.repair - 259524 messages and counting!
##-----------------------------------------------##

RG6 Coxial Cable Staplegun
 

I have used this one for years and it works great. It avoids any deformation
of the coax entirely, which is particularly desirable if you are using the
coax near or at its' high frequency limit. It is sold in a lot of Internet
sites and I bought mine with additional staples at Amazon.

http://sadoun.com/Sat/Products/Arrow...59-Stapler.htm

Smarty







"DA" wrote in message
om...
DA had written this in response to
http://thestuccocompany.com/maintena...un-270416-.htm
:

Jim Redelfs wrote:


I wish to acquire a good quality staple gun for home-size coaxial cable.
I
have seen the pros using the type I am looking for. It's the one that
requires TWO strokes of the stapler comes to mind. I'm thinking of the
type
of fastener where each leg of a "common" staple is set
individually and, when
the stapler is withdrawn, there is a black, plastic piece over the
staple and
cable. Is there a model name or type name for this critter? TIA.

I don't have/operated a stapler you describe but I can imagine it is still
set with one stroke on both sides. Regardless, a coax cable is a pretty
rigid one and will withstand some degree of abuse and so in vast majority
of cases all you need is ANY stapler that can be loaded with arched
staples to avoid flattening the cable.

\//.
-------------------------------------


##-----------------------------------------------##
Delivered via http://thestuccocompany.com/
Building Construction and Maintenance Forum
Web and RSS access to your favorite newsgroup -
alt.home.repair - 259524 messages and counting!
##-----------------------------------------------##

RG6 Coxial Cable Staplegun
 

DA wrote:
DA had written this in response to
http://thestuccocompany.com/maintena...un-270416-.htm
:

Jim Redelfs wrote:


I wish to acquire a good quality staple gun for home-size coaxial cable.
I
have seen the pros using the type I am looking for. It's the one that
requires TWO strokes of the stapler comes to mind. I'm thinking of the
type
of fastener where each leg of a "common" staple is set
individually and, when
the stapler is withdrawn, there is a black, plastic piece over the
staple and
cable. Is there a model name or type name for this critter? TIA.

I don't have/operated a stapler you describe but I can imagine it is still
set with one stroke on both sides. Regardless, a coax cable is a pretty
rigid one and will withstand some degree of abuse and so in vast majority
of cases all you need is ANY stapler that can be loaded with arched
staples to avoid flattening the cable.

I can't agree. It is really important not to use just ANY staple on any
cable carrying RF.