Roof cement to adhere shingles?
 

I am making a rabbit hutch for a friend and to avoid nails through the
plywood roof, I was thinking of using roofing cement to adhere the 3
tab shingles to the wood instead of nails.

Will the roofing cement suffice in windy/stormy weather once it has
dried/cured? This is not a high tech/demanding project, just want
something trouble free.

Roof cement to adhere shingles?
 

Roof cement to adhere shingles?
 

wrote in message
ups.com...
I am making a rabbit hutch for a friend and to avoid nails through the
plywood roof, I was thinking of using roofing cement to adhere the 3
tab shingles to the wood instead of nails.

Will the roofing cement suffice in windy/stormy weather once it has
dried/cured? This is not a high tech/demanding project, just want
something trouble free.

For something this size I'd probably go with short screws. You can always
add washers if you think the heads are too small.

Roof cement to adhere shingles?
 

on 11/8/2007 1:31 PM said the following:
I am making a rabbit hutch for a friend and to avoid nails through the
plywood roof, I was thinking of using roofing cement to adhere the 3
tab shingles to the wood instead of nails.

Will the roofing cement suffice in windy/stormy weather once it has
dried/cured? This is not a high tech/demanding project, just want
something trouble free.


It'll be fine. Just remember to cement the bottom of the tabs to the
shingle underneath so no wind can get under it. If they do blow off,
just pick them up off the ground and re-glue them. :-)

--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Roof cement to adhere shingles?
 

Roof cement to adhere shingles?
 

Roof cement to adhere shingles?
 

Will work fine.

Next time for the animal type buildings, consider rolled roofing. Do the
job in warm weather.

--
Dave
Profound is we're here due to a chance arrangement
of chemicals in the ocean billions of years ago.
More profound is we made it to the top of the food
chain per our reasoning abilities.
Most profound is the denial of why we may
be on the way out.
wrote in message
ups.com...
I am making a rabbit hutch for a friend and to avoid nails through the
plywood roof, I was thinking of using roofing cement to adhere the 3
tab shingles to the wood instead of nails.

Will the roofing cement suffice in windy/stormy weather once it has
dried/cured? This is not a high tech/demanding project, just want
something trouble free.

Roof cement to adhere shingles?
 

It would help answer the OP's question if he would give us a little
more background. How big is the hutch? How tall? If it is small
enough to glue the shingles down without having to crawl around, it
would probably be fine to glue them with roofing cement. On something
that small, I don't think felt is necessary. I don't think they'd
take much abuse, however, like walking on them, large amounts of snow
and ice, etc. Perhaps as someone suggested a urethane caulk would be
better. You might want to experiment. Having said that, I still think
you'd be better off with some type of nail, though itdepends on the
project. What are the consequences if a shingle falls off? If it's
no big deal, then go for it. If the owner is going to sue your ass
for emotional damages because their bunnies got wet, then better nail
down with 5 nails per, two layers of ice and water, tar every shingle,
etc .

Roof cement to adhere shingles?
 

Or how about using metal roofing, couple sheets of barn type tin would make
a nice roof
wrote in message
ups.com...
I am making a rabbit hutch for a friend and to avoid nails through the
plywood roof, I was thinking of using roofing cement to adhere the 3
tab shingles to the wood instead of nails.

Will the roofing cement suffice in windy/stormy weather once it has
dried/cured? This is not a high tech/demanding project, just want
something trouble free.

Roof cement to adhere shingles?
 

on 11/10/2007 2:08 PM Craig M said the following:
Or how about using metal roofing, couple sheets of barn type tin would make
a nice roof

Or aluminum sheets sold in rolls for flashing. Available at HD, Lowes,
or other hardware stores

wrote in message
ups.com...

I am making a rabbit hutch for a friend and to avoid nails through the
plywood roof, I was thinking of using roofing cement to adhere the 3
tab shingles to the wood instead of nails.

Will the roofing cement suffice in windy/stormy weather once it has
dried/cured? This is not a high tech/demanding project, just want
something trouble free.







--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Roof cement to adhere shingles?
 

Or, a thicker plywood roof and shorter nails.

"willshak" wrote in message
...
on 11/10/2007 2:08 PM Craig M said the following:
Or how about using metal roofing, couple sheets of barn type tin would
make a nice roof

Or aluminum sheets sold in rolls for flashing. Available at HD, Lowes, or
other hardware stores

wrote in message
ups.com...

I am making a rabbit hutch for a friend and to avoid nails through the
plywood roof, I was thinking of using roofing cement to adhere the 3
tab shingles to the wood instead of nails.

Will the roofing cement suffice in windy/stormy weather once it has
dried/cured? This is not a high tech/demanding project, just want
something trouble free.







--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Roof cement to adhere shingles?
 

"Erik Dillenkofer" wrote in message
. ..
Or, a thicker plywood roof and shorter nails.

"willshak" wrote in message
...
on 11/10/2007 2:08 PM Craig M said the following:
Or how about using metal roofing, couple sheets of barn type tin would
make a nice roof

Or aluminum sheets sold in rolls for flashing. Available at HD, Lowes, or
other hardware stores

wrote in message
ups.com...

I am making a rabbit hutch for a friend and to avoid nails through the
plywood roof, I was thinking of using roofing cement to adhere the 3
tab shingles to the wood instead of nails.

Will the roofing cement suffice in windy/stormy weather once it has
dried/cured? This is not a high tech/demanding project, just want
something trouble free.







--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @


Sounds to me like a good application for a heavy duty stapler with staples
of a suitable length.

Don Young

Roof cement to adhere shingles?
 

Don Young wrote:
"Erik Dillenkofer" wrote in message
. ..
Or, a thicker plywood roof and shorter nails.

"willshak" wrote in message
...
on 11/10/2007 2:08 PM Craig M said the following:
Or how about using metal roofing, couple sheets of barn type tin would
make a nice roof

Or aluminum sheets sold in rolls for flashing. Available at HD, Lowes, or
other hardware stores

wrote in message
ups.com...

I am making a rabbit hutch for a friend and to avoid nails through the
plywood roof, I was thinking of using roofing cement to adhere the 3
tab shingles to the wood instead of nails.

Will the roofing cement suffice in windy/stormy weather once it has
dried/cured? This is not a high tech/demanding project, just want
something trouble free.





--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Sounds to me like a good application for a heavy duty stapler with staples
of a suitable length.

Don Young



Roofing cement is the way to go. It is typically a black tarry stuff and
works very well.
I used it on a real house a few years ago and not a shingle has blown
off despite several storms.
No staples, thank you.

RF

Roof cement to adhere shingles?
 

On Nov 13, 7:00 pm, RF wrote:
Don Young wrote:
"Erik Dillenkofer" wrote in message
...
Or, a thicker plywood roof and shorter nails.

"willshak" wrote in message
...
on 11/10/2007 2:08 PM Craig M said the following:
Or how about using metal roofing, couple sheets of barn type tin would
make a nice roof

Or aluminum sheets sold in rolls for flashing. Available at HD, Lowes, or
other hardware stores

wrote in message
egroups.com...

I am making a rabbit hutch for a friend and to avoid nails through the
plywood roof, I was thinking of using roofing cement to adhere the 3
tab shingles to the wood instead of nails.

Will the roofing cement suffice in windy/stormy weather once it has
dried/cured? This is not a high tech/demanding project, just want
something trouble free.

--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Sounds to me like a good application for a heavy duty stapler with staples
of a suitable length.

Don Young

Roofing cement is the way to go. It is typically a black tarry stuff and
works very well.
I used it on a real house a few years ago and not a shingle has blown
off despite several storms.
No staples, thank you.

RF

OK, I did it with roofing cement. The metal roof would have been an
alternative, but i had a bunch of shingles already. I cemented them
all down and let it sit for a week. Then I loaded it in the back of
my truck with the bottoms of the shingles facing into the wind driving
(it was above my rooftop of the cab). They stayed on at 55MPH for 5
miles, so I think they will hold OK! Thanks for the replies.