Cedar Post: Does Any Product Really Work to Retard Rot?
I have a specially turned cedar lamp post that I would like to
preserve from rot as best possible. I have looked at various products but, based on the viscosity of the liquid and the fact that they seem to be water-based, I don't have much confidence in them. Is there any product that really works?? Thanks. Frank |
Cedar Post: Does Any Product Really Work to Retard Rot?
"frank1492" wrote in message
... I have a specially turned cedar lamp post that I would like to preserve from rot as best possible. I have looked at various products but, based on the viscosity of the liquid and the fact that they seem to be water-based, I don't have much confidence in them. Is there any product that really works?? Thanks. Frank I have cedar posts that have been in use in the garden for 15 years. I treated them with Green Cuprinol: http://www.jamestowndistributors.com...d+Preservative The posts show no signs of trouble so far. |
Cedar Post: Does Any Product Really Work to Retard Rot?
On Thu, 25 Oct 2007 20:32:51 GMT, frank1492
wrote: I have a specially turned cedar lamp post that I would like to preserve from rot as best possible. I have looked at various products but, based on the viscosity of the liquid and the fact that they seem to be water-based, I don't have much confidence in them. Is there any product that really works?? Thanks. Frank Seal the end with tar. Roofing tar should work OK. Dig the hole 1 foot deeper and have the post rest on top of gravel. The post should last 15 years or perhaps many more. My mailbox post is going on its 17th year. |
Cedar Post: Does Any Product Really Work to Retard Rot?
Thanks to all. I have a gallon of Behr Post Protector (similar to the
Cuprinol) home but will consider the tar idea which makes a lot of sense also. (Why not apply the roofing tar up the sides of the post as well?) Thanks again! Frank P.S. At Home Depot, is that called Roof Sealer? On Thu, 25 Oct 2007 23:02:54 GMT, Phisherman wrote: On Thu, 25 Oct 2007 20:32:51 GMT, frank1492 wrote: I have a specially turned cedar lamp post that I would like to preserve from rot as best possible. I have looked at various products but, based on the viscosity of the liquid and the fact that they seem to be water-based, I don't have much confidence in them. Is there any product that really works?? Thanks. Frank Seal the end with tar. Roofing tar should work OK. Dig the hole 1 foot deeper and have the post rest on top of gravel. The post should last 15 years or perhaps many more. My mailbox post is going on its 17th year. |
Cedar Post: Does Any Product Really Work to Retard Rot?
On Oct 25, 1:32 pm, frank1492 wrote:
I have a specially turned cedar lamp post that I would like to preserve from rot as best possible. I have looked at various products but, based on the viscosity of the liquid and the fact that they seem to be water-based, I don't have much confidence in them. Is there any product that really works?? Thanks. Frank Frank- How about a metal post base where the wood is slightly ~2" above the dirt? cheers Bob |
Cedar Post: Does Any Product Really Work to Retard Rot?
According to frank1492 :
Thanks to all. I have a gallon of Behr Post Protector (similar to the Cuprinol) home but will consider the tar idea which makes a lot of sense also. (Why not apply the roofing tar up the sides of the post as well?) Thanks again! Frank P.S. At Home Depot, is that called Roof Sealer? Caution: coating the bottom of the post with tar will prevent the bottom of the post drying out, and will accelerate rot. This only works with pressure-applied anti-rot that leaves the bottom of the post still able to drain. You want the bottom of the post being able to dry. That means using materials that _don't_ seal the wood below grade, and parking the very bottom of the post in something that drains well. Like gravel. -- Chris Lewis, Age and Treachery will Triumph over Youth and Skill It's not just anyone who gets a Starship Cruiser class named after them. |
All times are GMT +1. The time now is 06:16 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter