DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Replacing Woodstove with ... (https://www.diybanter.com/home-repair/205126-replacing-woodstove.html)

[email protected] June 29th 07 07:12 PM

Replacing Woodstove with ...
 
All,

We could really use some input around the replacement of our current
primary heat source. We live in a rural area and currently rely mostly
on a woodstove as the primary heat source. We do have some electric
baseboards as well but when runnig these our electrical bill explodes.
We live in BC , Canada and our electricl rate is 0.06 CAD per KW.

We have done a lot of research across the many alternative that exist
today: air-to-air heatpumps, air-to-water heatpumps, ground source
heatpumps (Geo), pellet boilers etc. We don't have natural gas
available so that is not an options. After going through all the
options I have come to the conclusion that the best replacement
(considering all things like cost, comfort, noise, environment etc) is
to put in an electrical boiler (dual energy so we can use propane as
the backup for when we loose power) in combination with hydronic
baseboards. We will likely need somewhere abour 50,000 - 60,000 BTU
and our sqft is around 2200 (two story home with split levels and
vaulted seiling, skylights etc). The house was built in 1982 and
insulation is not great (but also not terribly bad e.g. we do have
double paned windows).

Before contacting heating contractors it would be great if people in
this group could help provide some input to whether we are on the
right track, anything that we are missing etc etc.

The cost of this solution is looking at around $3,000 USD for the
basebaords and $2,000 for the dual energy boiler. Of course on top of
that we will have the installation and plumbing.

Thanks in advance,
Daniel


Edwin Pawlowski June 29th 07 07:48 PM

Replacing Woodstove with ...
 

wrote in message

baseboards as well but when runnig these our electrical bill explodes.
We live in BC , Canada and our electricl rate is 0.06 CAD per KW.

I have come to the conclusion that the best replacement
(considering all things like cost, comfort, noise, environment etc) is
to put in an electrical boiler (dual energy so we can use propane as
the backup for when we loose power) in combination with hydronic
baseboards.

The cost of this solution is looking at around $3,000 USD for the
basebaords and $2,000 for the dual energy boiler. Of course on top of
that we will have the installation and plumbing.

Firs, I'd love to have those electric rates. Here in CT we are paying 19¢.
Yes, that is 3X what you are complaining about.

I don't know that propane is a good replacement and if the payback for $5000
is worth it, but you can do a cost comparison for different fuels. Check
here
http://hearth.com/econtent/index.php...on_calculator/



Ralph Mowery June 29th 07 07:57 PM

Replacing Woodstove with ...
 
Look in to the corn stove. Fellow near me has one and likes it.

http://burncorn.cas.psu.edu/


wrote in message
ups.com...
All,

We could really use some input around the replacement of our current
primary heat source. We live in a rural area and currently rely mostly
on a woodstove as the primary heat source. We do have some electric
baseboards as well but when runnig these our electrical bill explodes.
We live in BC , Canada and our electricl rate is 0.06 CAD per KW.

We have done a lot of research across the many alternative that exist
today: air-to-air heatpumps, air-to-water heatpumps, ground source
heatpumps (Geo), pellet boilers etc. We don't have natural gas
available so that is not an options. After going through all the
options I have come to the conclusion that the best replacement
(considering all things like cost, comfort, noise, environment etc) is
to put in an electrical boiler (dual energy so we can use propane as
the backup for when we loose power) in combination with hydronic
baseboards. We will likely need somewhere abour 50,000 - 60,000 BTU
and our sqft is around 2200 (two story home with split levels and
vaulted seiling, skylights etc). The house was built in 1982 and
insulation is not great (but also not terribly bad e.g. we do have
double paned windows).

Before contacting heating contractors it would be great if people in
this group could help provide some input to whether we are on the
right track, anything that we are missing etc etc.

The cost of this solution is looking at around $3,000 USD for the
basebaords and $2,000 for the dual energy boiler. Of course on top of
that we will have the installation and plumbing.

Thanks in advance,
Daniel




Tony Hwang June 29th 07 08:09 PM

Replacing Woodstove with ...
 
wrote:

All,

We could really use some input around the replacement of our current
primary heat source. We live in a rural area and currently rely mostly
on a woodstove as the primary heat source. We do have some electric
baseboards as well but when runnig these our electrical bill explodes.
We live in BC , Canada and our electricl rate is 0.06 CAD per KW.

We have done a lot of research across the many alternative that exist
today: air-to-air heatpumps, air-to-water heatpumps, ground source
heatpumps (Geo), pellet boilers etc. We don't have natural gas
available so that is not an options. After going through all the
options I have come to the conclusion that the best replacement
(considering all things like cost, comfort, noise, environment etc) is
to put in an electrical boiler (dual energy so we can use propane as
the backup for when we loose power) in combination with hydronic
baseboards. We will likely need somewhere abour 50,000 - 60,000 BTU
and our sqft is around 2200 (two story home with split levels and
vaulted seiling, skylights etc). The house was built in 1982 and
insulation is not great (but also not terribly bad e.g. we do have
double paned windows).

Before contacting heating contractors it would be great if people in
this group could help provide some input to whether we are on the
right track, anything that we are missing etc etc.

The cost of this solution is looking at around $3,000 USD for the
basebaords and $2,000 for the dual energy boiler. Of course on top of
that we will have the installation and plumbing.

Thanks in advance,
Daniel

Hmmm,
That is very good rate for the electricity. In Calgary, I pay 0.082.
Just locked it on a deal for 5 years at 0.07 with Enmax.

Dave Bugg June 29th 07 08:09 PM

Replacing Woodstove with ...
 
Edwin Pawlowski wrote:
wrote in message

baseboards as well but when runnig these our electrical bill
explodes. We live in BC , Canada and our electricl rate is 0.06 CAD
per KW. I have come to the conclusion that the best replacement
(considering all things like cost, comfort, noise, environment etc)
is to put in an electrical boiler (dual energy so we can use propane
as the backup for when we loose power) in combination with hydronic
baseboards.

The cost of this solution is looking at around $3,000 USD for the
basebaords and $2,000 for the dual energy boiler. Of course on top of
that we will have the installation and plumbing.

Firs, I'd love to have those electric rates. Here in CT we are
paying 19¢. Yes, that is 3X what you are complaining about.


Wow. Our rates are about 2.5 cents per KW. Our Public Utility District owns
two hydro dams.
--
Dave
www.davebbq.com



EXT June 29th 07 08:47 PM

Replacing Woodstove with ...
 
Here in the GTA area of Ontario we pay much more than what you do. Are you
sure you are reading your bill correctly?

Here we pay $0.055 per kWh ramping up to $0.064 per kWh, plus delivery
charges, Regulatory charges and Debt retirement charges and GST. At our
consumption it works out to a total of $0.109 Canadian per kWh on our last
bill.


wrote in message
ups.com...
All,

We could really use some input around the replacement of our current
primary heat source. We live in a rural area and currently rely mostly
on a woodstove as the primary heat source. We do have some electric
baseboards as well but when runnig these our electrical bill explodes.
We live in BC , Canada and our electricl rate is 0.06 CAD per KW.

We have done a lot of research across the many alternative that exist
today: air-to-air heatpumps, air-to-water heatpumps, ground source
heatpumps (Geo), pellet boilers etc. We don't have natural gas
available so that is not an options. After going through all the
options I have come to the conclusion that the best replacement
(considering all things like cost, comfort, noise, environment etc) is
to put in an electrical boiler (dual energy so we can use propane as
the backup for when we loose power) in combination with hydronic
baseboards. We will likely need somewhere abour 50,000 - 60,000 BTU
and our sqft is around 2200 (two story home with split levels and
vaulted seiling, skylights etc). The house was built in 1982 and
insulation is not great (but also not terribly bad e.g. we do have
double paned windows).

Before contacting heating contractors it would be great if people in
this group could help provide some input to whether we are on the
right track, anything that we are missing etc etc.

The cost of this solution is looking at around $3,000 USD for the
basebaords and $2,000 for the dual energy boiler. Of course on top of
that we will have the installation and plumbing.

Thanks in advance,
Daniel




Roger Taylor June 29th 07 09:21 PM

Replacing Woodstove with ...
 
I cannot answer your question, which is pretty complicated, but you might
also post this query on alt.energy.homepower - they specialize on these
kinds of heating questions.
Roger

(snip) I have come to the conclusion that the best replacement
(considering all things like cost, comfort, noise, environment etc) is
to put in an electrical boiler (dual energy so we can use propane as
the backup for when we loose power) in combination with hydronic
baseboards.
Before contacting heating contractors it would be great if people in
this group could help provide some input to whether we are on the
right track, anything that we are missing etc etc.
The cost of this solution is looking at around $3,000 USD for the
basebaords and $2,000 for the dual energy boiler. Of course on top of
that we will have the installation and plumbing.





All times are GMT +1. The time now is 05:09 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter