Elec oven heating element broken
 

Something happened to the bottom heating element and one end has broken off
from the point where it connects to the back of the oven. Is this easily
replaced, or do I look for a new stove?

Its only a few years old (5?) -- Frigidaire. I called the 1 800 # and
electrolux answered, but no one was there.

Thanks

--


:O:
Wesley Dowling
Callisto Solutions, LLC
1602 Belle View Blvd #585
Alexandria VA,. 22307
(703) 283 3497

Elec oven heating element broken
 

On Thu, 10 May 2007 21:18:17 -0400, "MoonsOfJupiter"
wrote:

Something happened to the bottom heating element and one end has broken off
from the point where it connects to the back of the oven. Is this easily
replaced, or do I look for a new stove?

Its only a few years old (5?) -- Frigidaire. I called the 1 800 # and
electrolux answered, but no one was there.

Thanks
www.partsdirect.com

It's an easy fix.

Elec oven heating element broken
 

On May 10, 8:23 pm, (Lamey) wrote:
On Thu, 10 May 2007 21:18:17 -0400, "MoonsOfJupiter"

snip

www.partsdirect.com

It's an easy fix.

Also www.repairclinic.com

Joe

Elec oven heating element broken
 

On Thu, 10 May 2007 21:18:17 -0400, "MoonsOfJupiter"
wrote:

Something happened to the bottom heating element and one end has broken off
from the point where it connects to the back of the oven. Is this easily
replaced, or do I look for a new stove?

There are at least two other choices, that it is replaced with some
difficulty, and that it is replaced by calling a service man. :)

I don't know this brand or this model, but mine is easy. Turn off the
circuit breaker for the oven. Put tape over the breaker so that no one
else will turn it back on when you are in the other room. Make sure
you have the right circuit breaker by turning the oven on. It should
not go on.

In my case, it just takes unscrewing two screws at the back of the
oven, pulling the wires out a bit, and sliding the flat metal sleeves
off the flat metal tabs on the element. You'll probably have to pull
the piece that broke off out of its sleeve too. Reverse to install
the new one.

But someone else here probably knows your brand and you should wait
for him for better details.

Its only a few years old (5?) -- Frigidaire. I called the 1 800 # and
electrolux answered, but no one was there.

That's sad.

Thanks

Elec oven heating element broken
 

On Thu, 10 May 2007 23:58:11 -0400, mm
wrote:

On Thu, 10 May 2007 21:18:17 -0400, "MoonsOfJupiter"
wrote:

Something happened to the bottom heating element and one end has broken off
from the point where it connects to the back of the oven. Is this easily
replaced, or do I look for a new stove?

Get a new stove. I'll remove the old one from your house for $50
disposal fee.

There are at least two other choices, that it is replaced with some
difficulty, and that it is replaced by calling a service man. :)


Or it's repaired by duct taping it back together.

I don't know this brand or this model, but mine is easy. Turn off the
circuit breaker for the oven. Put tape over the breaker so that no one
else will turn it back on when you are in the other room. Make sure

Or tape everyone in the house to a chair, door, or the wall. Use 5 to
10 rolls of duct tape on each person.

you have the right circuit breaker by turning the oven on. It should
not go on.

In my case, it just takes unscrewing two screws at the back of the
oven, pulling the wires out a bit, and sliding the flat metal sleeves
off the flat metal tabs on the element. You'll probably have to pull
the piece that broke off out of its sleeve too. Reverse to install
the new one.

But someone else here probably knows your brand and you should wait
for him for better details.

Its only a few years old (5?) -- Frigidaire. I called the 1 800 # and
electrolux answered, but no one was there.

That's sad.

Thanks