Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Water softener problem
I haven't had a chance to look at this problem yet but thought I'd see if
there are any experts that can tell me what to look for. I am constantly amazed at the varied experience displayed here so that is why I'm asking for advance advice. Water softener consists of two units. A salt water storage tank, appears to be around 30 gallons. This is connected to the main unit via a small hose. The main unit is a cylinder about 8 inches in diameter and about 3.5 to 4 feet high. On top is a mechanism I have heard referred to as a "head". It has a couple controls for setting time and setting for amount of salt required. The problem: There is a small (about two inches in diameter) motor that apparently runs the clock and I assume the mechanism of valves for back-flushing. This motor is running very hot and humming. Being in a hurry, I unplugged the softener and left. I know I haven't given a very good description here but does some expert recognize the unit, and is able to suggest a source for a motor replacement, which I assume it the problem? Thanks in advance. Bob-tx |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sears water softener problem | Home Repair | |||
ge water softener problem | Home Repair | |||
water softener problem, water empties from holding tank | Home Repair | |||
I think its a water softener system problem | Home Repair | |||
Water Softener Problem? | Home Repair |