Deck post question
"HotRdd" wrote in message 1) I've reclaimed some old and heavy 10" x 10" posts from a barn that I'm hoping to use to give the deck some character, does anyone see any problems using this structurally? Nope, should be very strong 2) What type of sealer should I use to treat this old lumber.Recommendations I'd use some sort of oil like Penofin 3) I need to bury some posts this weekend and I'm not sure what the best method is. Do you get a concrete tube and fill it full of concrete and then put the post on top or do you encase the post in the concrete? WHY? 4) Should I stick with treated lumber for the posts? You fill the hold with concrete and use a mounting braked for the post. Structurally, the concrete and post will perform well and the bracket serves two purposes. It keeps it lined up and more important, keep it from ground contact and wicking up water to rot it away. Your 10 x 10's may have character, but are more prone to rot than a pressure treated post. If you are in the process of starting a deck, you can get a lot of information on brackets and fasteners at www.mcfeelys.com |
Deck post question
On Apr 20, 11:12 pm, "HotRdd" wrote:
I'm about to start the replacement of an old deck and was wondering if you guys can answer a few questions for me. 1) I've reclaimed some old and heavy 10" x 10" posts from a barn that I'm hoping to use to give the deck some character, does anyone see any problems using this structurally? I see no problem here, should look very nice. 2) What type of sealer should I use to treat this old lumber.Recommendations I am not familiar here with top brands 3) I need to bury some posts this weekend and I'm not sure what the best method is. Do you get a concrete tube and fill it full of concrete and then put the post on top or do you encase the post in the concrete? WHY? A little insight.......if in frost zone is why (depth here also varies upon the region you are in), and also will be more secure in the long run ( post could work it way loose, become unstable and move, and also may allow water etc to enter which may rot your post)....then your screwed. http://www.buildingspecs.com/articles_decks.asp http://www.askthebuilder.com/DeckConstruction.shtml 4) Should I stick with treated lumber for the posts? Your 10x10 posts should be very sturdy.........and maintaining them regularly; there should be no problems. |
Deck post question
"HotRdd" wrote in message ... Great, this actually answers my questions. NOW what wood sealer do you guys recommend? rec.woodworking might be a good place to ask. There's so many different woods, and so many sealers for so many purposes. I would imagine that whatever you do, you should redo it every couple of years depending on weather exposure. Steve |
Deck post question
According to HotRdd :
I'm about to start the replacement of an old deck and was wondering if you guys can answer a few questions for me. 1) I've reclaimed some old and heavy 10" x 10" posts from a barn that I'm hoping to use to give the deck some character, does anyone see any problems using this structurally? Not structurally, no, but some posts (eg: hickory) will _not_ stand up to weather very well, and given their age, they may go quite fast. Now, if they're cedar, they'd should last a long time. If you can identify what kind of wood they were, it might help. 2) What type of sealer should I use to treat this old lumber.Recommendations Just about any, but, don't bury the posts. 3) I need to bury some posts this weekend and I'm not sure what the best method is. Do you get a concrete tube and fill it full of concrete and then put the post on top or do you encase the post in the concrete? WHY? You can do it many different ways. The main things to remember: 1) If the end of the post is underground, make sure the last few inches are in gravel, _not_ concrete. Eg: dig hole, add a few inches of gravel, drop in post, add an inch or two more of gravel, _then_ fill with concrete. 2) If you're using an auger to drill the holes, and the posts ends are underground, you really don't need sonotube underground. You only need a bit of forming to keep the top of the concrete slightly above ground level, sloping away from the post. 3) If the posts are going to rest on top of the concrete, cast-in proper saddle brackets (above dirt level), and the deck needs to be supported from the side so that it doesn't sway. 4) Should I stick with treated lumber for the posts? I probably would, without being a bit more sure of the weather resistance of the barn posts. If you have to bury the posts, _don't_ use the old barn posts unless they're ceder. -- Chris Lewis, Age and Treachery will Triumph over Youth and Skill It's not just anyone who gets a Starship Cruiser class named after them. |
Deck post question
I'm about to start the replacement of an old deck and was wondering if you
guys can answer a few questions for me. 1) I've reclaimed some old and heavy 10" x 10" posts from a barn that I'm hoping to use to give the deck some character, does anyone see any problems using this structurally? 2) What type of sealer should I use to treat this old lumber.Recommendations 3) I need to bury some posts this weekend and I'm not sure what the best method is. Do you get a concrete tube and fill it full of concrete and then put the post on top or do you encase the post in the concrete? WHY? 4) Should I stick with treated lumber for the posts? |
Deck post question
Great, this actually answers my questions. NOW what wood sealer do you guys
recommend? "HotRdd" wrote in message ... I'm about to start the replacement of an old deck and was wondering if you guys can answer a few questions for me. 1) I've reclaimed some old and heavy 10" x 10" posts from a barn that I'm hoping to use to give the deck some character, does anyone see any problems using this structurally? 2) What type of sealer should I use to treat this old lumber.Recommendations 3) I need to bury some posts this weekend and I'm not sure what the best method is. Do you get a concrete tube and fill it full of concrete and then put the post on top or do you encase the post in the concrete? WHY? 4) Should I stick with treated lumber for the posts? |
All times are GMT +1. The time now is 01:25 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter