Toto toilet seat broken hold to toilet
 

The one piece slow dropping seat has an integral attachment, this has
a lip molded to it that holds it in place by the bolt. Well the lip
broke off (granddaughter child seat put stress on it, I guess), so now
only one bolt is holding. This looks non repairable to me. Any
thoughts.

Toto toilet seat broken hold to toilet
 

On Mar 28, 11:14 pm, allan wrote:
The one piece slow dropping seat has an integral attachment, this has
a lip molded to it that holds it in place by the bolt. Well the lip
broke off (granddaughter child seat put stress on it, I guess), so now
only one bolt is holding. This looks non repairable to me. Any
thoughts.

You might be able to epoxy it back together. Better, contact the
manfuacturer for a replacement. Aftermarket generic replacement are
also available. They have a big selectin at the BORG.

Toto toilet seat broken hold to toilet
 

What is BORG

On 29 Mar 2007 08:23:25 -0700, "Lawrence"
wrote:

On Mar 28, 11:14 pm, allan wrote:
The one piece slow dropping seat has an integral attachment, this has
a lip molded to it that holds it in place by the bolt. Well the lip
broke off (granddaughter child seat put stress on it, I guess), so now
only one bolt is holding. This looks non repairable to me. Any
thoughts.

You might be able to epoxy it back together. Better, contact the
manfuacturer for a replacement. Aftermarket generic replacement are
also available. They have a big selectin at the BORG.

Toto toilet seat broken hold to toilet
 

In article .com, "Lawrence" wrote:
On Mar 28, 11:14 pm, allan wrote:
The one piece slow dropping seat has an integral attachment, this has
a lip molded to it that holds it in place by the bolt. Well the lip
broke off (granddaughter child seat put stress on it, I guess), so now
only one bolt is holding. This looks non repairable to me. Any
thoughts.

You might be able to epoxy it back together. Better, contact the
manfuacturer for a replacement. Aftermarket generic replacement are
also available. They have a big selectin at the BORG.

I've tried several epoxies on a plastic toilet seat and none
of them lasted. Bemis (world's largest maker) was completely
unhelpful with a replacement hinge.

I just took the old seat down to HD and bought the closest
matching replacement seat which cost around $10. Problem solved
permanently following a 2 mintute installation job.

My conclusion was: don't mess around with these things.
Just replace with something that fits and you like. If you
can't find anything suitable, try contacting Toto. I imagine
they're more helpful than Bemis (they couldn't be less so).

--
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~|
| Malcolm Hoar "The more I practice, the luckier I get". |
| Gary Player. |
| http://www.malch.com/ Shpx gur PQN. |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~

Toto toilet seat broken hold to toilet
 

Home Depot

It's a Star Trek Next Generation reference.

http://en.wikipedia.org/wiki/Borg_%28Star_Trek%29


"allan" wrote in message
...
What is BORG

On 29 Mar 2007 08:23:25 -0700, "Lawrence"
wrote:

On Mar 28, 11:14 pm, allan wrote:
The one piece slow dropping seat has an integral attachment, this has
a lip molded to it that holds it in place by the bolt. Well the lip
broke off (granddaughter child seat put stress on it, I guess), so now
only one bolt is holding. This looks non repairable to me. Any
thoughts.

You might be able to epoxy it back together. Better, contact the
manfuacturer for a replacement. Aftermarket generic replacement are
also available. They have a big selectin at the BORG.

Toto toilet seat broken hold to toilet
 

"allan" wrote in message
...
What is BORG

Big Orange Retail Giant

Toto toilet seat broken hold to toilet
 

"Malcolm Hoar" wrote in message
...
In article .com,
"Lawrence" wrote:
On Mar 28, 11:14 pm, allan wrote:
The one piece slow dropping seat has an integral attachment, this has
a lip molded to it that holds it in place by the bolt. Well the lip
broke off (granddaughter child seat put stress on it, I guess), so now
only one bolt is holding. This looks non repairable to me. Any
thoughts.

You might be able to epoxy it back together. Better, contact the
manfuacturer for a replacement. Aftermarket generic replacement are
also available. They have a big selectin at the BORG.

I've tried several epoxies on a plastic toilet seat and none
of them lasted. Bemis (world's largest maker) was completely
unhelpful with a replacement hinge.

I just took the old seat down to HD and bought the closest
matching replacement seat which cost around $10. Problem solved
permanently following a 2 mintute installation job.

My conclusion was: don't mess around with these things.
Just replace with something that fits and you like. If you
can't find anything suitable, try contacting Toto. I imagine
they're more helpful than Bemis (they couldn't be less so).

--
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~|
| Malcolm Hoar "The more I practice, the luckier I get". |
| Gary Player. |
| http://www.malch.com/ Shpx gur PQN. |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~

Total has exact replacement seats, a bit pricey though. If epoxy fails in
the long term, try plastic welding which should be as strong as the original
plastic.

Toto toilet seat broken hold to toilet
 

On Wednesday, March 28, 2007 at 9:14:25 PM UTC-7, allan wrote:
The one piece slow dropping seat has an integral attachment, this has
a lip molded to it that holds it in place by the bolt. Well the lip
broke off (granddaughter child seat put stress on it, I guess), so now
only one bolt is holding. This looks non repairable to me. Any
thoughts.

Forget all the glue and trying to re-attach weak plastic to the weak plastic seat bracket. Take two, flat washers (metal) that will cover the seat bracket area, keeping the detached plastic rings, if still intact, and re-attach the bolts through the toilet and voila. You now have a much sturdier attachment in place and you don't have to worry about whether glued plastic can hold up.

Toto toilet seat broken hold to toilet
 

On Saturday, November 14, 2015 at 5:19:00 PM UTC-8, HandyLawyer wrote:
On Wednesday, March 28, 2007 at 9:14:25 PM UTC-7, allan wrote:
The one piece slow dropping seat has an integral attachment, this has
a lip molded to it that holds it in place by the bolt. Well the lip
broke off (granddaughter child seat put stress on it, I guess), so now
only one bolt is holding. This looks non repairable to me. Any
thoughts.

Forget all the glue and trying to re-attach weak plastic to the weak plastic seat bracket. Take two, flat washers (metal) that will cover the seat bracket area, keeping the detached plastic rings, if still intact, and re-attach the bolts through the toilet and voila. You now have a much sturdier attachment in place and you don't have to worry about whether glued plastic can hold up.

Me thinks me posted too soon ...

The Cover of the seat does NOT go back far enough, unless the washers are really thin, and perhaps made of a thinner plastic as well. The metal flat washers DO hold the seat down nicely, but with that cover not going back far enough, that poses a new problem. I'm still working on a better solution..