mount towel rack/magazine rack to ceramic tile
 

Does anyone know how one mounts a towel rack or magazine rack that
Pottery Barn or Restoration Hardware sell onto ceramic tile in a
bathroom? Do I have to drill and if so how and with what? Or is there
some sort of special cement and if so, what is it called?

mount towel rack/magazine rack to ceramic tile
 

On Mar 8, 10:52?am, "mikeasmel" wrote:
Does anyone know how one mounts a towel rack or magazine rack that
Pottery Barn or Restoration Hardware sell onto ceramic tile in a
bathroom? Do I have to drill and if so how and with what? Or is there
some sort of special cement and if so, what is it called?

Don't they give instructions with these things? They should.
Generally it is easier to drill through a line of grout, rather than
through the tile, if this will give you the desired height. The size
bit will be determined by the anchor you are using. You do want to
put adhesive (eg liquid nails) or silicone caulk into the hole before
installing anchor. The hardware supplied should allow slight
adjustment so that you can level the thing. Measure twice- at least-
drill once.

mount towel rack/magazine rack to ceramic tile
 

"mikeasmel" wrote in message
ps.com...
| Does anyone know how one mounts a towel rack or magazine rack that
| Pottery Barn or Restoration Hardware sell onto ceramic tile in a
| bathroom? Do I have to drill and if so how and with what? Or is there
| some sort of special cement and if so, what is it called?
|


drill into tile (not grout joint) using a spade bit made for tile.

mount towel rack/magazine rack to ceramic tile
 

"3G" wrote in message ...

"mikeasmel" wrote in message
ps.com...
| Does anyone know how one mounts a towel rack or magazine rack that
| Pottery Barn or Restoration Hardware sell onto ceramic tile in a
| bathroom? Do I have to drill and if so how and with what? Or is there
| some sort of special cement and if so, what is it called?
|


drill into tile (not grout joint) using a spade bit made for tile.


You can get special bits for drilling tile -- they come in a variety
of sizes and have a spear-like point. Not too expensive and they
work well. Go slowly; oil the bit frequently with a light weight
oil; and carefully use a center punch to dimple the tile surface
before you start (keeps the bit from wandering and helps prevent
the tile from chipping).