My AC unite clogged the overflow pan ran over the only way I found out is
when there was a water stain in the ceiling. I let it dry for about 2 weeks
used OIL BASE primer ( cover stain) 2 coats then painted. AS for the carpet
I would pull it out and dry it or replace it, But that might depend on how
saturated carpet and pad are. I can't imagine the water hurting the tile
and doubt that much water got threw. Another thing to remember is these guys
are out to make money nothing wrong with that, but it is easy to take
advantage of someone. Also if you go threw tour home owners insurance they
might raise your rates so it might be better to pay out of pocket, that's
something to look into.




"abhi" wrote in message
oups.com...
Hi all,

Yesterday the flush tank on the second floor overflowed and caused a
little bit of flooding. About 40 square feet of tiled area and 10
square feet of carpeted area was covered in water. Water leaked through
the floor and damaged the ceiling on the first floor.

I managed to shut off the leak before it did much damage. Water
probably leaked for about 15-20 minutes. The ceiling is intact, with
very little water marks.

Today we had a restoration expert come in and he plans to
- remove the wet carpet
- put a large fan to dry carpet padding
- Put a large fan to dry the tiles
- Cut the sheet rock on the first floor ceiling
- Put a large fan to dry the ceiling

I talked with a few other people (not in water damage restoration
business) and they claim, we don't have to do all this. Every thing
will dry out and it is unlikely for mold to appear with this little
amount of water. According to them, I should dry out the carpet with a
fan.
Ceiling will be ok, sheet rock is supposed to absorb water.

Now, I am considering whether to let the professional do the job or
wait for the carpet to dry?

What have been your experiences? Any suggestions on what is the right
thing to do?

TIA

Abhi