Replacement of Molding Around Glass Panel on Front Door
 

Does anyone have past success with replacing the molding around a glass
insert in a steel front door? For months, I have tried calling door
companies, carpenters, door installers, etc. and have yet to find
anyone who has successfully replaced their cracked vinyl molding
without having to buy a new door! Your help will be greatly
appreciated. This is a first for me to attempt using the internet to
request help/information. Bear with me as I learn how this works!!
Jean in Texas

Replacement of Molding Around Glass Panel on Front Door
 

On 09/23/06 08:33 pm wrote:

Does anyone have past success with replacing the molding around a glass
insert in a steel front door? For months, I have tried calling door
companies, carpenters, door installers, etc. and have yet to find
anyone who has successfully replaced their cracked vinyl molding
without having to buy a new door! Your help will be greatly
appreciated. This is a first for me to attempt using the internet to
request help/information. Bear with me as I learn how this works!!

Do you know who the manufacturer of the door was? Still in business? We
had no problem getting replacement glasses and rims for our Pease doors
and sidelights, but I think we could have got the rims on their own if
we had wanted (although in our case not only were some of the rims
cracked, but the glass units had leaked and no longer had the required
insulating properties). We ordered the replacements from Pease, but they
were drop-shipped from ODL in Zeeland, MI; maybe you could try the
latter: www.odl.com.

Keep in mind that you'll need to know not only the height and width but
also the thickness of the glass; our new glass units are thicker than
the old ones, so the rims are thinner; it's *possible* that only the
thicker glass units (better insulation) are made these days and that
you'll have to replace both rims and glass.

Perce

Replacement of Molding Around Glass Panel on Front Door
 

do yo know the door manufacturer? they are probably the only ones that
can help unless you are willing to enlarge the hole and put in a
different one.

Empressess #124457


The best Games


a href=http://www.gamestotal.com/Multiplayer Online Games/a a
href=http://www.gamestotal.com/Strategy Games/abra
href=http://uc.gamestotal.com/Unification Wars/a - a
href=http://uc.gamestotal.com/Massive Multiplayer Online
Games/abra href=http://gc.gamestotal.com/Galactic Conquest/a -
a href=http://gc.gamestotal.com/Strategy Games/abra
href=http://www.stephenyong.com/runescape.htmRunescape/abra
href=http://www.stephenyong.com/kingsofchaos.htmKings of chaos/abr



wrote:
Does anyone have past success with replacing the molding around a glass
insert in a steel front door? For months, I have tried calling door
companies, carpenters, door installers, etc. and have yet to find
anyone who has successfully replaced their cracked vinyl molding
without having to buy a new door! Your help will be greatly
appreciated. This is a first for me to attempt using the internet to
request help/information. Bear with me as I learn how this works!!
Jean in Texas

Replacement of Molding Around Glass Panel on Front Door