Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
2 Tiling Questions
Hi, amatuer tiler here looking for a couple tips.
#1. Three walls frame in a tub and I'm tiling up almost to the ceiling onto cement board. The back wall is tiled wall to wall (with small expansion gaps in the corners), so it's the side wall tile that will be seen in full while the side wall tile's edge will obsure the back tile only so far as the tile is thick. In other words, were it not for the expansion gap, the edge of the side wall tile would butt against the back wall tile face. My question is actually a simple one. For the gap between the edge of the sidewall tile and the face of the back wall tile, should I use grout or should I use caulking for fear this will be a more stressful expansion gap? #2. I'm using 6" square tiles. Their surface has a rough character with small nooks and cranies. The edges are all blunted. Not smooth and not really rounded, but they look as if someone just chipped the hard edge off. I'm going with a staggered layout and will be cutting a lot of tiles. Is there an effect way to get this "chipped" edge look. I tried a grinder with a coarser wheel but it was slow going and made the edge too smooth. I also tried a general purpose woodworking tile but I'm having a hard time replicating the chipped effect. Is there a tool for this? A standard nipper seems far to big. Any ideas? http://tinyurl.com/fdzwd #3. Okay, so I lied. There's a third question I just thought of. I've been using drill bit rated for ceramic tile and glass, but even at low RPMs it's just not going through very well. I'm tyring to make a hole in the tile about 1 1/2" diamater, so I've got a lot of drilling to do to make the cut out. Are there any other tips for getting the most out of these "ceramic tile/glass" bits? Thanks for any help or advice. I always appreciate the good info found in this newsgroup. Jim |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FAQ: Answering questions emailed direct to 'editor' | UK diy | |||
Questions: Ceramic tiling over linoleum | Home Repair | |||
Questions about Stone Tiling Countertop | Home Repair | |||
Tiling questions | UK diy | |||
Tiling on Bonding Plaster? | UK diy |