Home |
Search |
Today's Posts |
![]() |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to alt.home.repair
|
|||
|
|||
![]()
I'm getting closer and closer to building my fence (yeah!). And still have a
few questions. Based on comments from others, I think I'm going to put a post about one foot from house, and just run wood from fence to house, leaving a gap between end of wood and house. It won't be that strong, hanging off the post like that with , but it doesn't need to be since it's just a board or two. The last person here actually bolted a fence post to the house (argh). I'm using 4" x 4" x 8' wood, set 2 feet deep in concrete. Question: Should I set the posts 2 1/2 feet deep and have posts stick up 5 1/2 feet, and have boards 6' tall that stick up 6 inches from post? Or is 2 feet deep adequate for an 8 foot? Related to the above, I want to space the posts 6 feet apart instead of 8 feet apart. Most fences I see spaced 8 feet apart sag inbetween posts, and I don't want that to happen. It means maybe 10 extra posts, but the overall expense is not significant and the fence will be stronger. Comments Gates. Should I use thicker wood/deeper posts for gates? I've never built a fence so I really don't know. And is there a standard gate size? This gate won't get used much, but it still needs to be strong enough. TIA for all the excellent advice and putting up with my n00b questions. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Need help with the Excalibur sliding table. | Woodworking | |||
TS fence upgrade? | Woodworking | |||
TS fence upgrade? | Woodworking | |||
stain backside of cedar fence trim? | Home Repair | |||
Advice Needed: TS Modifications to Mount Aftermarket Fence | Woodworking |