toilet not refilling after flushing
I have a flush tank with a float that goes up and down the refill valve
(not the ball). Recently however after I flush the toilet occasionally water will refill into the tank only after i have touched/moved the float up and down. Also noticed water fill over the fill tube thus leaking excess water into the toilet blow. Any suggestions on a remedy Thanks |
toilet not refilling after flushing
david wrote:
I have a flush tank with a float that goes up and down the refill valve (not the ball). Recently however after I flush the toilet occasionally water will refill into the tank only after i have touched/moved the float up and down. Also noticed water fill over the fill tube thus leaking excess water into the toilet blow. Any suggestions on a remedy Thanks Sounds like the valve part of the assembly is getting sticky. Easiest thing to do is just replace the entire fill valve assembly, they can be gotten for around $10 at the box stores. Jeff -- Jeffry Wisnia (W1BSV + Brass Rat '57 EE) "Rudeness is the weak man's imitation of strength." |
toilet not refilling after flushing
2 possible solutions: take it apart clean, inspect, replace any seals, or buy a new fluid-master install adjust. Both are messy, as after you turn the water off and flush it, and sponge up any remaining water, there still always seems to be some drip from the mounting hole after the old one is removed. just have a catch can and rags handy. This is an ideal time to inspect the feed line and valve. if you have no valve and had to turn off the main water valve to service the toilet, now is the time to add one. If the end on the supply valve isn't compatible with the new valve (assuming you op for the new valve) it would be a good idea to pick one up with the new valve, too long is OK if you don't mind the plumbers loop to take up the excess, sometimes they don't have the exact length as your old one. |
toilet not refilling after flushing
just change it out, I work in a hotel and we have gotten new ones out of the
box that won't work. Cheaper and easier "david" wrote in message ups.com... I have a flush tank with a float that goes up and down the refill valve (not the ball). Recently however after I flush the toilet occasionally water will refill into the tank only after i have touched/moved the float up and down. Also noticed water fill over the fill tube thus leaking excess water into the toilet blow. Any suggestions on a remedy Thanks |
All times are GMT +1. The time now is 06:08 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter