Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair,alt.home.repair
|
|||
|
|||
Please Help! 4 bulb antique floor lap wiring
I have my great grandmothers 4 bulb floor lamp that has started to make
crackling noises in the upper bulb. I would like to rewire all ends. It has me lost as to which wire goes where. Ok.... I also didnt write down everything ( or map it) while taking it apart. :{ Big Mistake! The 3 lower bulbs connect to the lower turning switch. Turn once for one light on, turn again for 2 lights on, turn again for 3 lights on at once, turn again and all off. The switch has a black, blue and, red wire coming from it. The upper turning switch is just your basic off and on, but was wired thru the the lower wiring. I would truly appreciate ANY help on rewiring this properly. A diagram or drawing would make the most sense to me, but any info would really help. Thank you in advance.....If I havent made anything clear please ask. Sincerely, Tracy |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wiring and plumbing a second kitchen | Home Repair | |||
light bulb question | Home Repair | |||
OT - light bulb | Metalworking | |||
Change a light bulb Usenet Style | Home Repair | |||
connecting aluminum to copper wiring | Home Repair |