overzealous when scraping off popcorn ceiling
 

Our son-in-law and daughter scraped the popcorn off our ceilings and one of
them (I won't say which one :-) got carried away and scraped too much,
gouging the finish in some areas.

From the other answers I've read about popcorn ceilings, it sounds like my
best bet is to get some watered down drywall mud and put it on those areas
with a sponge. Any other ideas?

thanks!

overzealous when scraping off popcorn ceiling
 

In article om,
mtbear wrote:

Our son-in-law and daughter scraped the popcorn off our ceilings and one of
them (I won't say which one :-) got carried away and scraped too much,
gouging the finish in some areas.

From the other answers I've read about popcorn ceilings, it sounds like my
best bet is to get some watered down drywall mud and put it on those areas
with a sponge. Any other ideas?

You probably need to skimcoat the entire ceiling. This is an art by
itself, but the average handy person can learn it. There's a little
about it he

http://www.hometime.com/Howto/projec...all/drwl_7.htm

Google will give other results.

Skimcoat, sand, texture, prime, paint. We just did this in our living
room after removing popcorn ceiling. Looks great.

-Frank

--
Here's some of my work:
http://www.franksknives.com/

overzealous when scraping off popcorn ceiling
 

Most popcorn ceilings were 2 coated at best. Good drywall work
requires 3 coats. That missing coat is the whole reason for the
popularity of popcorn - it could disguise the need for that 3rd
coat. If you simply paint what is there, I suspect that you will
see the joints enough that you will regret not having done the 3rd
coat, this will be especially true if you try to leave it slick
with no texture. In this process, you will more than take care of
a few gouges that were probably inevitable. I would suggest some
form of texture or hire some one to slick it out.
______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)




"mtbear" wrote in message
news:806d7b5d6a45b15e84aad4fd6592c2f6@homerepairli ve.com...
Our son-in-law and daughter scraped the popcorn off our ceilings
and one of
them (I won't say which one :-) got carried away and scraped
too much,
gouging the finish in some areas.

From the other answers I've read about popcorn ceilings, it
sounds like my
best bet is to get some watered down drywall mud and put it on
those areas
with a sponge. Any other ideas?

thanks!

overzealous when scraping off popcorn ceiling
 

On Thu, 20 Apr 2006 10:52:19 -0500, "mtbear"
wrote:

Our son-in-law and daughter scraped the popcorn off our ceilings and one of
them (I won't say which one :-) got carried away and scraped too much,
gouging the finish in some areas.

From the other answers I've read about popcorn ceilings, it sounds like my
best bet is to get some watered down drywall mud and put it on those areas
with a sponge. Any other ideas?

From now on, just put the lid on the popcorn pot.

thanks!

overzealous when scraping off popcorn ceiling
 

Thanks all for your input! Will let you know how it works out and how many
different ways I try.