|
One cable for internet and TV
I have a question. There is one cable coming to the room that I have
sublet for internet and TV. Every time I wanna use TV I have to unplug the Internet and vice versa. Is there a way to get an aparatus to use both of them at the same time? I am in canada and TV internet cable is rogers |
One cable for internet and TV
In article .com,
wrote: I have a question. There is one cable coming to the room that I have sublet for internet and TV. Every time I wanna use TV I have to unplug the Internet and vice versa. Is there a way to get an aparatus to use both of them at the same time? I am in canada and TV internet cable is rogers No. It's impossible. Go back to dialup for internet access. |
One cable for internet and TV
|
One cable for internet and TV
|
One cable for internet and TV
wrote in message ... On 7 Apr 2006 20:29:45 -0700, wrote: I have a question. There is one cable coming to the room that I have sublet for internet and TV. Every time I wanna use TV I have to unplug the Internet and vice versa. Is there a way to get an aparatus to use both of them at the same time? I am in canada and TV internet cable is rogers Go get a 1gz splitter. The cable company should give you one tho. He'll also need two new, assumably short, lengths of cable to go from the splitter to each device. Let's at least save him that second trip to the electronics store, cursing us for not giving complete information (no, it's not obvious, if you've never done it before). |
One cable for internet and TV
they'll probably hand you a splitter and some connecting cables at your
cable company. |
One cable for internet and TV
I have a splitter and a switching splitter. A switch may or may not be
needed to keep signal strength high. Call the cable company to see what they recommend. Any hardware store should have what you need to make unplugging unesesary. |
One cable for internet and TV
On Sat, 08 Apr 2006 04:57:41 GMT, "Shane Glaseman"
wrote: wrote in message .. . On 7 Apr 2006 20:29:45 -0700, wrote: I have a question. There is one cable coming to the room that I have sublet for internet and TV. Every time I wanna use TV I have to unplug the Internet and vice versa. Is there a way to get an aparatus to use both of them at the same time? I am in canada and TV internet cable is rogers Go get a 1gz splitter. The cable company should give you one tho. He'll also need two new, assumably short, lengths of cable to go from the splitter to each device. Let's at least save him that second trip to the electronics store, cursing us for not giving complete information (no, it's not obvious, if you've never done it before). Maybe I'm too used to connecting those things to see it as non-obvious, but you can look at the splitter (while it's still in the package for most) and see that it needs cables on all connectors. -- Mark Lloyd http://notstupid.laughingsquid.com "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well armed lamb contesting the vote." - Benjamin Franklin |
One cable for internet and TV
"Mark Lloyd" wrote in message ... On Sat, 08 Apr 2006 04:57:41 GMT, "Shane Glaseman" wrote: wrote in message . .. On 7 Apr 2006 20:29:45 -0700, wrote: I have a question. There is one cable coming to the room that I have sublet for internet and TV. Every time I wanna use TV I have to unplug the Internet and vice versa. Is there a way to get an aparatus to use both of them at the same time? I am in canada and TV internet cable is rogers Go get a 1gz splitter. The cable company should give you one tho. He'll also need two new, assumably short, lengths of cable to go from the splitter to each device. Let's at least save him that second trip to the electronics store, cursing us for not giving complete information (no, it's not obvious, if you've never done it before). Maybe I'm too used to connecting those things to see it as non-obvious, but you can look at the splitter (while it's still in the package for most) and see that it needs cables on all connectors. It certainly could just be me. But I've had too much experience telling people "do this," without holding their hand and taking them step-by-step... only to find that they couldn't make leaps that I thought were obvious. Not that the OP here will have that problem, but why not just cover the possibility? |
One cable for internet and TV
I have been reading this thread - and have what may be a dumb
question... Does the same cable that connects to TVs also provide internet service in the USA too? We have cable (Bright House) for TV but it is basic service so there is no box with it...we just hook up the TV to the cable. In another room, we have a cable with modem for the internet (Road Runner)...and it is connected to a router which is then connected to the computer. I had no idea the same cable could do both things. If we wanted to hook up a TV to the RR cable, could we do that? I mean, buy a splitter, or perhaps figure out a way to setup a wireless connection to the TV.? Just wondering. |
One cable for internet and TV
wrote in message oups.com... I have been reading this thread - and have what may be a dumb question... Does the same cable that connects to TVs also provide internet service in the USA too? We have cable (Bright House) for TV but it is basic service so there is no box with it...we just hook up the TV to the cable. In another room, we have a cable with modem for the internet (Road Runner)...and it is connected to a router which is then connected to the computer. I had no idea the same cable could do both things. If we wanted to hook up a TV to the RR cable, could we do that? I mean, buy a splitter, or perhaps figure out a way to setup a wireless connection to the TV.? Just wondering. In the US the same cable that has the TV signal also has the cable internet on it. YOu can take your cable modem and hook it to any TV connection in the house or you could take any TV and hook it to the wire going to the cable modem. The only place you may run into problems is if there are splitters or amplifiers in the lines. The cable modem usually needs a higher level than the TV does to work. Also the amplifiers may be one way amplifiers and will not work on the internet. In otherwords the cable comming into the house has all the signals on it. Usually a single splitter is used to send the maximum signal direct to the internet modem and the other side of the splitter is then sent to all the TV sets and other splitters for them if more than one TV is in use. |
One cable for internet and TV
On 8 Apr 2006 12:12:55 -0700, "
wrote: I have been reading this thread - and have what may be a dumb question... Does the same cable that connects to TVs also provide internet service in the USA too? We have cable (Bright House) for TV but it is basic service so there is no box with it...we just hook up the TV to the cable. In another room, we have a cable with modem for the internet (Road Runner)...and it is connected to a router which is then connected to the computer. I had no idea the same cable could do both things. If we wanted to hook up a TV to the RR cable, could we do that? I Yes, but you would only see 1's and 0's. In various sequences. Actually, I think it depends on the way the provider has it set up. In Dallas I think there are two cables coming into the house, but apparently in that part of Canada, there is only one. mean, buy a splitter, or perhaps figure out a way to setup a wireless connection to the TV.? Just wondering. I think you could only use a router for tv for any digital stations on the cable, and not for any other stations. All of the internet is digital (1's and 0's) so it works. BTW, I was kidding in my first line above. You would see some mixture of black and white dots or areas, parts might look different shades of grey, I think, but they wouldn't actually be the numbers one or zero. |
One cable for internet and TV
In article ,
Shane Glaseman wrote: wrote in message .. . On 7 Apr 2006 20:29:45 -0700, wrote: I have a question. There is one cable coming to the room that I have sublet for internet and TV. Every time I wanna use TV I have to unplug the Internet and vice versa. Is there a way to get an aparatus to use both of them at the same time? I am in canada and TV internet cable is rogers Go get a 1gz splitter. The cable company should give you one tho. He'll also need two new, assumably short, lengths of cable to go from the splitter to each device. Let's at least save him that second trip to the electronics store, cursing us for not giving complete information (no, it's not obvious, if you've never done it before). Lets not forget that these cables need to be high quality RG-6 or better, not the crappy 30% shielded RG-59 junk with push-on connectors that you get in the box with your VCR, which should be thrown in the junk pile.. -- -- Welcome My Son, Welcome To The Machine -- Bob Vaughan | techie @ tantivy.net | | P.O. Box 19792, Stanford, Ca 94309 | -- I am Me, I am only Me, And no one else is Me, What could be simpler? -- |
One cable for internet and TV
On 8 Apr 2006 12:12:55 -0700, "
wrote: I have been reading this thread - and have what may be a dumb question... Does the same cable that connects to TVs also provide internet service in the USA too? We have cable (Bright House) for TV but it is basic service so there is no box with it...we just hook up the TV to the cable. In another room, we have a cable with modem for the internet (Road Runner)...and it is connected to a router which is then connected to the computer. I had no idea the same cable could do both things. If we wanted to hook up a TV to the RR cable, could we do that? I mean, buy a splitter, or perhaps figure out a way to setup a wireless connection to the TV.? Just wondering. Here (in east Texas) I have cable TV (not digital) and cable internet. The first thing the cable connects to when it enters the house is a 1:2 splitter, with one side connected directly to the cable modem. -- Mark Lloyd http://notstupid.laughingsquid.com "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well armed lamb contesting the vote." - Benjamin Franklin |
One cable for internet and TV
|
One cable for internet and TV
In article ,
Mark Lloyd wrote: On Sun, 9 Apr 2006 12:22:56 +0000 (UTC), (Bob Vaughan) wrote: In article , Shane Glaseman wrote: wrote in message ... On 7 Apr 2006 20:29:45 -0700, wrote: I have a question. There is one cable coming to the room that I have sublet for internet and TV. Every time I wanna use TV I have to unplug the Internet and vice versa. Is there a way to get an aparatus to use both of them at the same time? I am in canada and TV internet cable is rogers Go get a 1gz splitter. The cable company should give you one tho. He'll also need two new, assumably short, lengths of cable to go from the splitter to each device. Let's at least save him that second trip to the electronics store, cursing us for not giving complete information (no, it's not obvious, if you've never done it before). Lets not forget that these cables need to be high quality RG-6 or better, not the crappy 30% shielded RG-59 junk with push-on connectors that you get in the box with your VCR, which should be thrown in the junk pile.. RG6 or RG59 makes little difference for shorter cables. Push-on connectors are leakier and less physically secure. I always use screw connectors except for short tests. Same for crimped cable ends (with a good crimper). I'll agree that at those lengths, the loss of the cable makes litle difference, but what I'm concerned with is the shielding of the cable. Cable TV is a closed system.. it uses the same frequencies within the system that are also used by other users of the RF spectrum. Using inadequately shielded cables can lead to interference to the cable tv signal from outside sources, and more importantly, can lead to the cable tv system causing interference to the outside services, which can include public safety, broadcast media, cellphones, amateur radio, etc. Bottom line: use high quality low-loss cables, preferably with double or quad shielding, and 95-100% shield coverage. -- -- Welcome My Son, Welcome To The Machine -- Bob Vaughan | techie @ tantivy.net | | P.O. Box 19792, Stanford, Ca 94309 | -- I am Me, I am only Me, And no one else is Me, What could be simpler? -- |
One cable for internet and TV
clifto wrote: wrote: NTSC TV is a bandwidth hog. That is why the cable company is pushing digital. NTSC takes 6 MHz per channel. Digital takes 6 MHz per channel, more if you want 1080p or higher resolution. They're pushing digital because the set sellers want us to throw away all our existing televisions and buy new ones. -- analog NTSC takes 6 MHz for one analog program digital cable TV is divided into 6 MHz channels but each 6 MHz channel can carry 10 or more standard def programs or 2 high def programs on cable.. downstream cable modem signals are the same as digital cable TV signals Mark |
One cable for internet and TV
On Mon, 10 Apr 2006 00:43:27 +0000 (UTC),
(Bob Vaughan) wrote: In article , Mark Lloyd wrote: On Sun, 9 Apr 2006 12:22:56 +0000 (UTC), (Bob Vaughan) wrote: In article , Shane Glaseman wrote: wrote in message m... On 7 Apr 2006 20:29:45 -0700, wrote: I have a question. There is one cable coming to the room that I have sublet for internet and TV. Every time I wanna use TV I have to unplug the Internet and vice versa. Is there a way to get an aparatus to use both of them at the same time? I am in canada and TV internet cable is rogers Go get a 1gz splitter. The cable company should give you one tho. He'll also need two new, assumably short, lengths of cable to go from the splitter to each device. Let's at least save him that second trip to the electronics store, cursing us for not giving complete information (no, it's not obvious, if you've never done it before). Lets not forget that these cables need to be high quality RG-6 or better, not the crappy 30% shielded RG-59 junk with push-on connectors that you get in the box with your VCR, which should be thrown in the junk pile.. RG6 or RG59 makes little difference for shorter cables. Push-on connectors are leakier and less physically secure. I always use screw connectors except for short tests. Same for crimped cable ends (with a good crimper). I'll agree that at those lengths, the loss of the cable makes litle difference, but what I'm concerned with is the shielding of the cable. Cable TV is a closed system.. it uses the same frequencies within the system that are also used by other users of the RF spectrum. Using inadequately shielded cables can lead to interference to the cable tv signal from outside sources, and more importantly, can lead to the cable tv system causing interference to the outside services, which can include public safety, broadcast media, cellphones, amateur radio, etc. Bottom line: use high quality low-loss cables, preferably with double or quad shielding, and 95-100% shield coverage. And keep the shield complete at the connectors. The twist-on connectors can do a poor job of that. There was an obvious improvement when I started using the crimped ones. -- Mark Lloyd http://notstupid.laughingsquid.com "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well armed lamb contesting the vote." - Benjamin Franklin |
One cable for internet and TV
On Sun, 09 Apr 2006 12:53:30 -0400, wrote:
On Sun, 09 Apr 2006 00:59:38 -0400, mm wrote: Yes, but you would only see 1's and 0's. In various sequences. Actually, I think it depends on the way the provider has it set up. In Dallas I think there are two cables coming into the house, but apparently in that part of Canada, there is only one. mean, buy a splitter, or perhaps figure out a way to setup a wireless connection to the TV.? Just wondering. I think you could only use a router for tv for any digital stations on the cable, and not for any other stations. All of the internet is digital (1's and 0's) so it works. Cable internet is on low VHF (the same basic band as Ch 2-6) on Comcast in SW Florida. It all comes in on one cable. Compared to old style TV the internet is not that much bandwidth. NTSC TV is a bandwidth hog. That is why the cable company is pushing digital. The cable internet I have uses channel 99 (frequency somewhere between 6 and 7) for downstream and T-14 (frequency less than channel 2) for upstream. -- Mark Lloyd http://notstupid.laughingsquid.com "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well armed lamb contesting the vote." - Benjamin Franklin |
One cable for internet and TV
On 9 Apr 2006 17:47:03 -0700, "Mark" wrote:
clifto wrote: wrote: NTSC TV is a bandwidth hog. That is why the cable company is pushing digital. NTSC takes 6 MHz per channel. Digital takes 6 MHz per channel, more if you want 1080p or higher resolution. They're pushing digital because the set sellers want us to throw away all our existing televisions and buy new ones. -- analog NTSC takes 6 MHz for one analog program digital cable TV is divided into 6 MHz channels but each 6 MHz channel can carry 10 or more standard def programs or 2 high def programs on cable.. The local CBS station (analog on channel 19) here has digital on 19.1, and UPN on 19.2 (the digital is actually ch18, but they call it 19). downstream cable modem signals are the same as digital cable TV signals And upstream uses a smaller band, normally below the frequencies used for channel 2. Mark -- Mark Lloyd http://notstupid.laughingsquid.com "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well armed lamb contesting the vote." - Benjamin Franklin |
One cable for internet and TV
Shane Glaseman wrote: wrote in message ... On 7 Apr 2006 20:29:45 -0700, wrote: I have a question. There is one cable coming to the room that I have sublet for internet and TV. Every time I wanna use TV I have to unplug the Internet and vice versa. Is there a way to get an aparatus to use both of them at the same time? I am in canada and TV internet cable is rogers Go get a 1gz splitter. The cable company should give you one tho. He'll also need two new, assumably short, lengths of cable to go from the splitter to each device. Let's at least save him that second trip to the electronics store, cursing us for not giving complete information (no, it's not obvious, if you've never done it before). Amusing tale from the papers here last weekend; a woman comes home one day to find her apartment robbed, TV, computer, VCR, game machine all gone, doors all still locked. Next day she's in the bedroom, hears something in the living room, goes out and finds the building superintendent in the living room collecting the cables he forgot to steal the day before.... Oops. |
One cable for internet and TV
Mark wrote:
clifto wrote: wrote: NTSC TV is a bandwidth hog. That is why the cable company is pushing digital. NTSC takes 6 MHz per channel. Digital takes 6 MHz per channel, more if you want 1080p or higher resolution. They're pushing digital because the set sellers want us to throw away all our existing televisions and buy new ones. analog NTSC takes 6 MHz for one analog program digital cable TV is divided into 6 MHz channels but each 6 MHz channel can carry 10 or more standard def programs or 2 high def programs on cable.. They haven't got enough programming material to run a single program all day as it is. They'd never be able to do digital if they didn't force everyone to buy new stuff. If it were optional, few would adopt it, especially at today's prices. -- All relevant people are pertinent. All rude people are impertinent. Therefore, no rude people are relevant. -- Solomon W. Golomb |
| All times are GMT +1. The time now is 01:04 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter