Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
reparing a hearth
I live in a late victorian house. I am in the process of removing the
old fireplace and inserting a firebasket. I have taken out the old fireplace. The hearth in the fireplace was built up using bricks and cement. I have removed all this and am left with a hearth at approximately flush with the floor. The hearth in front was made out of bricks and cement. I have removed this and underneath is the original hearth which is also approximately flush with the floor. This original hearth appears to be made out of a lime, sand, cement mix, is about 3-4 inches thick and rests on the joists(?). It is old and crumbling a bit around the edges. My plan is to put a new layer of sand, lime, cement mix on both hearths, about 3-4 inches in depth. This would then give a single raised hearth. I would then put slate on top. Does that sound sensible? Or should I remove the old hearth and start from scratch? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
fireplace hearth | UK diy | |||
Damaged constructional hearth | UK diy | |||
Query re fitting hearth panel and back | UK diy | |||
Cutting and laying slate tiles for a hearth | UK diy | |||
Woodstove Hearth, Flush to Floor? | Home Repair |