DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   How to seal up a leaky toilet tank? (https://www.diybanter.com/home-repair/143289-how-seal-up-leaky-toilet-tank.html)

Rev. J. Toad February 3rd 06 11:43 PM

How to seal up a leaky toilet tank?
 
Hey folks... my toilet tank is leaking out of one of the boltholes. I
believe that the reason for this is that when it was installed, they
didn't use those rubbery washers that you're supposed to use. I added
them, and it's still leaking (very slow leak).

Ideally, I'd like to get away with not replacing the tank, so I'm
thinking that if I dry it off and use some kind of silicon or
something around the hole, it should seal it up. Any suggestions as to
what product I should use, or alternative ideas? Thanks folk.


"Fighting crime by building more jails is like fighting cancer by building more cemeteries." - Paul Kelly

Bob February 4th 06 12:06 AM

How to seal up a leaky toilet tank?
 
If you cleaned everything up good, that's usually enough. If they didn't use
rubber washers the first time, maybe the tank is cracked.

"Rev. J. Toad" wrote in message
...
Hey folks... my toilet tank is leaking out of one of the boltholes. I
believe that the reason for this is that when it was installed, they
didn't use those rubbery washers that you're supposed to use. I added
them, and it's still leaking (very slow leak).

Ideally, I'd like to get away with not replacing the tank, so I'm
thinking that if I dry it off and use some kind of silicon or
something around the hole, it should seal it up. Any suggestions as to
what product I should use, or alternative ideas? Thanks folk.


"Fighting crime by building more jails is like fighting cancer by building

more cemeteries." - Paul Kelly



Rich February 4th 06 12:20 AM

How to seal up a leaky toilet tank?
 
Same thing happenned to me years ago. Dried up the tank and siliconed the
bolts from inside. Leak's gone...

Rich
====================================
Garage Door Parts, LLC
973-472-4818
http://www.garagedoorsupply.com
====================================

"Bob" wrote in message
...
If you cleaned everything up good, that's usually enough. If they didn't
use
rubber washers the first time, maybe the tank is cracked.

"Rev. J. Toad" wrote in message
...
Hey folks... my toilet tank is leaking out of one of the boltholes. I
believe that the reason for this is that when it was installed, they
didn't use those rubbery washers that you're supposed to use. I added
them, and it's still leaking (very slow leak).

Ideally, I'd like to get away with not replacing the tank, so I'm
thinking that if I dry it off and use some kind of silicon or
something around the hole, it should seal it up. Any suggestions as to
what product I should use, or alternative ideas? Thanks folk.


"Fighting crime by building more jails is like fighting cancer by
building

more cemeteries." - Paul Kelly





buffalobill February 4th 06 01:17 AM

How to seal up a leaky toilet tank?
 
toilet parts are so inexpensive but when your home in a one-holer the
pressure for fast repair is up full blast.
the pdf at this link gives the perfect proper sequence of the bolts and
their rubber washers, so save it!
http://www.fluidmaster.com/pdf/6102_instructions.pdf
all parts and knowledge on repairing our twenty toilets is at:
www.fluidmaster.com


[email protected] February 4th 06 02:38 AM

How to seal up a leaky toilet tank?
 
On Fri, 03 Feb 2006 17:43:01 -0600, Rev. J. Toad
wrote:

Hey folks... my toilet tank is leaking out of one of the boltholes. I
believe that the reason for this is that when it was installed, they
didn't use those rubbery washers that you're supposed to use. I added
them, and it's still leaking (very slow leak).

Ideally, I'd like to get away with not replacing the tank, so I'm
thinking that if I dry it off and use some kind of silicon or
something around the hole, it should seal it up. Any suggestions as to
what product I should use, or alternative ideas? Thanks folk.


"Fighting crime by building more jails is like fighting cancer by building more cemeteries." - Paul Kelly


YES.
You will have to disassemble it again, be sure everything is 100%
clean and dry. Apply 100% pure silicone to both sides of the rubber
washers, under the bolt heads, etc. Reinstall adn you should be fine.
I have done this. It works

Be sure bolts are tight, but dont over tighten. Silicone is slippery
and the rubbers will expand and slide right out from under the bolt
heads.


George E. Cawthon February 4th 06 07:40 AM

How to seal up a leaky toilet tank?
 
Rev. J. Toad wrote:
Hey folks... my toilet tank is leaking out of one of the boltholes. I
believe that the reason for this is that when it was installed, they
didn't use those rubbery washers that you're supposed to use. I added
them, and it's still leaking (very slow leak).

Ideally, I'd like to get away with not replacing the tank, so I'm
thinking that if I dry it off and use some kind of silicon or
something around the hole, it should seal it up. Any suggestions as to
what product I should use, or alternative ideas? Thanks folk.


"Fighting crime by building more jails is like fighting cancer by building more cemeteries." - Paul Kelly


The key is to have the correct size rubber
washers, put them where they go and use the
correct size steel washers in the right place.
Tighten firmly but not so much as to crack the tank.

bones001 February 4th 06 05:02 PM

How to seal up a leaky toilet tank?
 
use LSX


[email protected] February 4th 06 05:14 PM

How to seal up a leaky toilet tank?
 
I use that silicone bathtub caulk every time I have one apart, use it
too on those cheesy sink drains.

easer to silicone it in the first place, saves disassembly later

I absolutely hate doing the same job twice


Mikey February 6th 06 04:39 PM

How to seal up a leaky toilet tank?
 


"Rev. J. Toad" wrote:

Hey folks... my toilet tank is leaking out of one of the boltholes. I
believe that the reason for this is that when it was installed, they
didn't use those rubbery washers that you're supposed to use. I added
them, and it's still leaking (very slow leak).

Ideally, I'd like to get away with not replacing the tank, so I'm
thinking that if I dry it off and use some kind of silicon or
something around the hole, it should seal it up. Any suggestions as to
what product I should use, or alternative ideas? Thanks folk.

"Fighting crime by building more jails is like fighting cancer by building more cemeteries." - Paul Kelly


Any silicone sealant that says it's for bathroom, tub and tile should work. Or you can try "Amazing Goop"
(that's it's actual name) for plumbing.



All times are GMT +1. The time now is 04:54 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter