remote controlled light switch
 

I want to control my garage's outside light from inside my house with a
remote controlled RF light switch. The light is currently controlled with
2 - 3 way switches, one on both floors of the garage. The light was never
wired to the house, and the only way to control it now is to walk out to the
garage and turn it on or off. I'd like to be able to do this remotely from
the house.
Does anyone manufacture some kind of receiver/switch and remote control that
you can wire into an existing 3 way circuit?
Has anyone here ever done this? I appreciate any help you might bring.
Thanks,
Snyde

remote controlled light switch
 

http://home.search.ebay.com/remote-f...refinesearchZ1

"Snydley" wrote in message
.. .
I want to control my garage's outside light from inside my house with a
remote controlled RF light switch. The light is currently controlled with
2 - 3 way switches, one on both floors of the garage. The light was never
wired to the house, and the only way to control it now is to walk out to
the
garage and turn it on or off. I'd like to be able to do this remotely from
the house.
Does anyone manufacture some kind of receiver/switch and remote control
that
you can wire into an existing 3 way circuit?
Has anyone here ever done this? I appreciate any help you might bring.
Thanks,
Snyde

remote controlled light switch
 

"Snydley" wrote in message
.. .
I want to control my garage's outside light from inside my house with a
remote controlled RF light switch. The light is currently controlled with
2 - 3 way switches, one on both floors of the garage. The light was never
wired to the house, and the only way to control it now is to walk out to
the
garage and turn it on or off. I'd like to be able to do this remotely from
the house.
Does anyone manufacture some kind of receiver/switch and remote control
that
you can wire into an existing 3 way circuit?
Has anyone here ever done this? I appreciate any help you might bring.
Thanks,
Snyde

X-10 and google

garage door opener type and google

remote controlled light switch
 

Snydley wrote:
I want to control my garage's outside light from inside my house with a
remote controlled RF light switch. The light is currently controlled
with 2 - 3 way switches, one on both floors of the garage. The light
was never wired to the house, and the only way to control it now is
to walk out to the garage and turn it on or off. I'd like to be able
to do this remotely from the house.
Does anyone manufacture some kind of receiver/switch and remote
control that you can wire into an existing 3 way circuit?
Has anyone here ever done this? I appreciate any help you might bring.
Thanks,
Snyde

http://www.smarthome.com/index.html

They have X-10 and RF Both should work for you. You also might want to
take a look at the garage door openers that offer multi function operation

--
Joseph Meehan

Dia duit

remote controlled light switch
 

Snydley wrote:

I want to control my garage's outside light from inside my house with a
remote controlled RF light switch. The light is currently controlled with
2 - 3 way switches, one on both floors of the garage. The light was never
wired to the house, and the only way to control it now is to walk out to the
garage and turn it on or off. I'd like to be able to do this remotely from
the house.
Does anyone manufacture some kind of receiver/switch and remote control that
you can wire into an existing 3 way circuit?
Has anyone here ever done this? I appreciate any help you might bring.
Thanks,
Snyde



If you want to "do it raht" so that both the existing switches in the
garage operate "normally" and the remote also switches the light on or
off.....

Sounds like you're going to need a DPDT "alternate position" relay wired
into the existing 3-way switch travelers and a momentary rf switch to
pulse its coil and cause the relay to act like a local DPDT switch
that's just been flipped.

HTH,

Jeff

P.S. Can someone give me a good reason why they call those SPDT switches
"3-way switches"? Seems to me they only have TWO positions.

JW

--
Jeffry Wisnia

(W1BSV + Brass Rat '57 EE)

"Truth exists; only falsehood has to be invented."

remote controlled light switch
 

Jeff Wisnia wrote:
Snydley wrote:

I want to control my garage's outside light from inside my house
with a remote controlled RF light switch. The light is currently
controlled with 2 - 3 way switches, one on both floors of the
garage. The light was never wired to the house, and the only way to
control it now is to walk out to the garage and turn it on or off.
I'd like to be able to do this remotely from the house.
Does anyone manufacture some kind of receiver/switch and remote
control that you can wire into an existing 3 way circuit?
Has anyone here ever done this? I appreciate any help you might
bring. Thanks,
Snyde



If you want to "do it raht" so that both the existing switches in the
garage operate "normally" and the remote also switches the light on or
off.....

Sounds like you're going to need a DPDT "alternate position" relay
wired into the existing 3-way switch travelers and a momentary rf
switch to pulse its coil and cause the relay to act like a local DPDT
switch that's just been flipped.

HTH,

Jeff

P.S. Can someone give me a good reason why they call those SPDT
switches "3-way switches"? Seems to me they only have TWO positions.

My guess is they usually involve three devices, one lamp and two
switches. Four way's add one or more switches. Maybe it is because the
switches have three wires connected (four ways have four wires.)


JW

--
Joseph Meehan

Dia duit

remote controlled light switch
 

Joseph Meehan wrote:

Jeff Wisnia wrote:

Snydley wrote:


I want to control my garage's outside light from inside my house
with a remote controlled RF light switch. The light is currently
controlled with 2 - 3 way switches, one on both floors of the
garage. The light was never wired to the house, and the only way to
control it now is to walk out to the garage and turn it on or off.
I'd like to be able to do this remotely from the house.
Does anyone manufacture some kind of receiver/switch and remote
control that you can wire into an existing 3 way circuit?
Has anyone here ever done this? I appreciate any help you might
bring. Thanks,
Snyde



If you want to "do it raht" so that both the existing switches in the
garage operate "normally" and the remote also switches the light on or
off.....

Sounds like you're going to need a DPDT "alternate position" relay
wired into the existing 3-way switch travelers and a momentary rf
switch to pulse its coil and cause the relay to act like a local DPDT
switch that's just been flipped.

HTH,

Jeff

P.S. Can someone give me a good reason why they call those SPDT
switches "3-way switches"? Seems to me they only have TWO positions.


My guess is they usually involve three devices, one lamp and two
switches. Four way's add one or more switches. Maybe it is because the
switches have three wires connected (four ways have four wires.)


A recent post somewhere said it goes back to the Edison days when
'openings' were counted for billing. A switch and a light were 2
openings or a 2-way. Two switches become a 3-way. 3 switches become a 4-way.

bud--

remote controlled light switch
 

I forgot to mention on my last post about this that the light I want to
control is a mercury vapor security light if that makes any difference.

Snyde
"Snydley" wrote in message
.. .
I want to control my garage's outside light from inside my house with a
remote controlled RF light switch. The light is currently controlled with
2 - 3 way switches, one on both floors of the garage. The light was never
wired to the house, and the only way to control it now is to walk out to
the
garage and turn it on or off. I'd like to be able to do this remotely from
the house.
Does anyone manufacture some kind of receiver/switch and remote control
that
you can wire into an existing 3 way circuit?
Has anyone here ever done this? I appreciate any help you might bring.
Thanks,
Snyde