Home |
Search |
Today's Posts |
![]() |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to alt.home.repair
|
|||
|
|||
![]()
On 3/3/2017 3:24 PM, Sam E wrote:
On 03/03/2017 12:14 PM, #1 wrote: On 03/03/2017 12:44 PM, Sam wrote: The problem lies with the phases of electricity you are getting. 240v is two alternating phases of 120v. it is possible to wire a 240v outlet using 2 120v lines with opposite phases. You'll need one of those magic transformers that turns a single-phase input on the primary into a two-phase output on the secondary. No transformer needed. TWO single-phase lines from the same source (already 180 degrees out of phase, as needed here). Now, maybe you can figure out how to get 3 phase. Here, it's either single-phase or 3-phase. No two-phase is available. Single-phase 120/240 service is delivered from a standard ubiquitous center-tapped transformer. The 3-phase wye service is 120/208 and the phases are 120 degrees apart. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Converting Victorian house into two Flats | UK diy | |||
Converting Victorian house into two Flats | UK diy | |||
Converting wall scone to plug-in ? | Home Repair | |||
article on converting lathe to CNC | Metalworking | |||
Converting JWTS-10CW2 to 230V and circuit wiring.. | Woodworking |