Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
 
Posts: n/a
Default Plumbing question....

Not sure if there is a more appropriate group to post this....if there
is, please let me know.

Anyway, here's what I'm faced with:

I have a two-storey home with a full 8-foot ceiling basement. The
basement was roughed-in for a future bathroom. The rough-in includes
the toilet, basin and bathtub plumbing and venting. I'll be installing
a toilet and a vanity (or pedestal sink...?) but will not be installing
a shower or bathtub. Instead, I'm installing a wall-mount urinal.
I've adjusted the plumbing accordingly for that (removed the trap in
the floor since there's a trap built into the urinal already), and the
venting for the urinal was already in place. So here's what I want to
do now:

I'm installing an 8x8 bar in the basement as well. I want to have a
small sink built into the bar but I'm not sure how to go about plumbing
that in. The sink will be approximately 8 feet away from the drain for
the urinal and approximately 12 feet away from the drain for the sink.
Where would be the best place to run my drain to? Both are currently 1
1/2" drains. Also, where can I vent to? The existing vent is
currently the same distance away as the drain....going straight up and
out the roof. Do I need to vent my new bar sink closer than 8-12 feet
away? And if so, can I go horizontal to the outside wall, then
vertical and out the side of the house with an elbow?

I've heard about these venting attachments things you can attach to
your trap or something also...water activated as I recall? They open
and allow the air to escape without doing all sorts of complex ABS runs
within closed spaces (bars, islands, etc.) Can anyone shed light on
this also?

I hope I've covered all of the details....any help would be greatly
appreciated.

Corey

  #2   Report Post  
Posted to alt.home.repair
Speedy Jim
 
Posts: n/a
Default Plumbing question....

wrote:
Not sure if there is a more appropriate group to post this....if there
is, please let me know.

Anyway, here's what I'm faced with:

I have a two-storey home with a full 8-foot ceiling basement. The
basement was roughed-in for a future bathroom. The rough-in includes
the toilet, basin and bathtub plumbing and venting. I'll be installing
a toilet and a vanity (or pedestal sink...?) but will not be installing
a shower or bathtub. Instead, I'm installing a wall-mount urinal.
I've adjusted the plumbing accordingly for that (removed the trap in
the floor since there's a trap built into the urinal already), and the
venting for the urinal was already in place. So here's what I want to
do now:

I'm installing an 8x8 bar in the basement as well. I want to have a
small sink built into the bar but I'm not sure how to go about plumbing
that in. The sink will be approximately 8 feet away from the drain for
the urinal and approximately 12 feet away from the drain for the sink.
Where would be the best place to run my drain to? Both are currently 1
1/2" drains. Also, where can I vent to? The existing vent is
currently the same distance away as the drain....going straight up and
out the roof. Do I need to vent my new bar sink closer than 8-12 feet
away? And if so, can I go horizontal to the outside wall, then
vertical and out the side of the house with an elbow?

I've heard about these venting attachments things you can attach to
your trap or something also...water activated as I recall? They open
and allow the air to escape without doing all sorts of complex ABS runs
within closed spaces (bars, islands, etc.) Can anyone shed light on
this also?

I hope I've covered all of the details....any help would be greatly
appreciated.

Corey

You would have to get the exact specifics from your local
inspector since requirements vary from state-to-state.

4 feet from trap to vent is typical.

This is one mechanical vent you were thinking of:
http://www.studor.com/
Again, ask the inspector.

He might insist on an "island vent":
http://www.codecheck.com/pg13_14plumbing.html

Run the vent on the exterior of the building?
Might get away with it; most places-no.

If it's practical in your layout, there is no reason
you can't extend the existing vent (for the urinal)
over to within 4 feet of the bar sink trap.
(Vent line must slope downward toward the bar sink.)

Jim
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Plumbing question No Home Repair 1 February 7th 05 02:06 AM
One more plumbing question and I promise that's it. Pecanfan UK diy 19 February 4th 05 05:04 PM
Plumbing Question Jeff UK diy 4 December 1st 03 01:49 PM
plumbing question chris gallagher UK diy 2 October 28th 03 05:34 PM
framing / plumbing question eric Home Repair 2 August 23rd 03 02:29 AM


All times are GMT +1. The time now is 07:53 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"