Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to misc.consumers.house,alt.home.repair
|
|||
|
|||
Need some advice about wiring basement
I am finishing my basement and need some tips on how to do a few things for
rough in. I am in Gwinnett County, GA if that matters. Specifically: 1) I definitely will have some sort of drop ceiling, probably acoustic tile but there is a small possibility it may be sheet rock. The ceiling will drop about a foot or so from the bottom of the joists. a) I assume that any electrical runs to lighting in the ceiling (cans, etc) will require armored cable since the wire is unsupported/unprotected from the joist to the tile? b) I also assume that this means I will need to terminate the NMB cable into a metal junction box, and run the armored cable from there to the fixtures? c) for rough-in there will be no actual fixtures...so how do I terminate the armored cable? Or do I not run any armored cable at all until fixtures are there? 2) What is used to rough-in wall lights (for example the bathroom), a standard circular fixture box like they used for the ceiling? 3) Will the inspector examine only what I have done? ie if he/she sees something that is sloppy but was done by the home builder, could I be required to fix it? That would seem rather unfair since THEY were supposed to get it inspected to get the CO... |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Advice on system to get rid of the moldy, musty odour and/or avoid it in basement | Home Repair | |||
advice sought - builder's idea for damp proofing a basement | UK diy | |||
Advice needed wet basement | Metalworking | |||
Wiring advice for a RM67 Roomstat | UK diy | |||
Basic wiring advice needed | Woodworking |